BMW Intake Parts for BMW G32 640i xDrive B58 3.0L

Line - Turbocharger-Coolant Pump

T#:536492

Part#: 11538666856

In Stock

$ 108.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 108.99 USD

Limited Qty Sale

Add to Wish List

Air Filter - K&N

T#:5470983

Part#: 33-3079

In Stock

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

High-flow cotton media is designed to allow up to 50% more airflow than traditional paper filters—and greater airflow can result in increased horsepower and torque. K&N® air filters are tested on a SuperFlow flow bench to ensure increased airflow over a stock filter. K&N’s state-of-the-art filter features thousands of microscopic cotton fibers, and an innovative design of layered, oiled cotton media helps to capture dirt and shield your engine from contaminants. Each filter design is tested in an ISO 5011 laboratory to ensure excellent filtration efficiency for outstanding engine protection.

Show More Show Less

AIR FLAP CONTROL, ACTIVE, UP

T#:601475

Part#: 51749854640

In Stock

12% off MSRP $ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.99 USD

Limited Qty Sale

Add to Wish List

Qty

12% off MSRP

$ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.99 USD

Limited Qty Sale

Add to Wish List

This component is necessary to keep your engine cool in high-output scenarios. If it fails you risk your engine not receiving enough air. Keep your engine running at peak performance and replace this asap at signs of failure.

Show More Show Less

Genuine BMW Vacuum Hose

T#:37535

Part#: 11747797129

Ships in 1-2 days

4% off MSRP $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

4% off MSRP

$ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Vacuum Hose Black - 3,5X2,0

N1000 - Snow Performance Water Injection Nozzle

T#:2317846

Part#: SNO-N1000

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Silicone Coupler - Straight 3 5/8" (92mm)

T#:377483

Part#: 003402ECS01A-07

In Stock

Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

Enhances vehicle performance
Durable construction for long-lasting reliability
Specifically designed for BMW vehicles

Show More Show Less

CCV Hose

T#:30629663

Part#: 11157637521

In Stock

Sale - Save 10% $ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.89 USD

Add to Wish List

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

T-Map sensor

T#:27105159

Part#: 13628637900

In Stock

Sale - Save 21% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 21%

$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braide...

T#:21374153

Part#: SNO-310-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

T#:8154081

Part#: 8200S

Ships in 2 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

CSF is continually updating and adding new products In an effort to help customers achieve the highest level of competition in motorsports. CSF is pleased to release the latest B58 performance product. The CSF B58 Thermal Rejection Competition Spacer (CSF #8200S). The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200 - ES4389640). Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Spacer Height = 6.5mm Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Can withstand temps up to 1100°F and is as strong as Aluminum Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind. Tested on @peppa_aka_skull’s (1000HP) A90 Supra by Visconti Tuning Includes installation hardware and instructions Highly recommended for Drag/Roll-Racing Applications where vehicles typically sit in staging lanes in-between racing Limited Lifetime Warranty Will NOT work with the OEM Manifold The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The B58 Super Manifold is made from Billet Aluminum and 100% Tig Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. The CSF Thermal Rejection Competition Spacer was designed for vehicles competing in motorsports who demand the absolute best cooling in order to gain a competitive edge. With that being said, there are significant advantages to adding this spacer upgrade to any vehicle with the CSF B58 Super Manifold installed.

Show More Show Less

BMS Drop-In Performance Air Filter - B48/B58

T#:38857248

Part#: BMSIDIPAFB4858

Ships on Sep 21, 2026

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter outperforms OE quality with its layered, oiled cotton media, engineered for maximum airflow, effective contaminant filtration, and increased horsepower. This washable, reusable filter is designed to last the lifetime of your vehicle, providing a cost-effective, high-performance upgrade. With a quick and easy installation, it fits directly into the factory airbox for a seamless upgrade. Replaces OEM BMW Air Filter Part #13718577170

Show More Show Less

Boost Cooler Stage 3 DI ProLine Water Injection

T#:21308464

Part#: SP10317PRO

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Show More Show Less

Water Methanol Controller (Boost) - VC-30

T#:21308475

Part#: SNO-60400

In Stock at Vendor

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

14GPH Water-Methanol Nozzle

T#:21374112

Part#: SNO-N1400

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water Methanol Check Valve

T#:2317849

Part#: SNO-8CV-QC

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 21, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

Hobb's Switch

T#:403482

Part#: ACC-HOBBS

Ships on Sep 21, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

BMS BMW Billet Port Injection Manifold - Gen 1 B58

T#:38655164

Part#: BMS-BPIM-G1B58

In Stock

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

Upgrade your factory plastic B58 intake manifold to the high-flow, high-strength aluminum Burger Motorsports Intake Manifold. Engineered for direct fitment, this precision-designed upgrade enhances durability, improves airflow, and supports high-performance builds. Key Features & Benefits: Increased airflow for improved performance Precision-machined aluminum—stronger and more durable than stock Integrated top-mount port injection bungs for optimal injector spray pattern 1/8" expansion vacuum ports—ideal for boost gauges, BOV references, or Hobbs switches Lightweight design with all factory connections for seamless installation Includes high-quality O-rings and all necessary hardware Compatible with your factory intercooler core Optional Port Injection & Fueling Upgrades Available with or without port injection hardware, including calibrated Bosch EV14 42mm fuel injectors and a plug-and-play fuel line: 550cc injectors—ideal for setups under 700whp 750cc injectors—recommended for 700-800whp builds 950cc injectors—for higher-power applications FREE $99 BMS B58 Phenolic Thermal Intake Manifold Spacer Included in the kit, this fiber-embedded phenolic spacer reduces heat transfer from the cylinder head to the intake manifold, resulting in lower intake air temperatures, denser air, and improved combustion efficiency. 🔥 Upgrade your B58 intake system today for superior strength, airflow, and performance! 🔥

Show More Show Less

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G01/02, Toyo...

T#:2498426

Part#: 8200

EO#: D-770

Ships in 4 Business Days

$ 4,299.00 USD

Add to Wish List

Qty

$ 4,299.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

In Stock at Vendor

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

T#:15744064

Part#: GEN1B58WIS

Ships on Sep 21, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

K&N High-Flow Air Filters

T#:22987120

Part#: 33-3134

In Stock at Vendor

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Show More Show Less

82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 21, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

G-Chassis B58 Front Mount Intake Kit

T#:25839035

Part#: GB58INT

Back Ordered

Starting at $ 600.00 USD

Add to Wish List

Starting at $ 600.00 USD

Add to Wish List

RK Tunes' B58 Front Mount Intakes are designed in-house utilizing high-quality 5-ply wire-reinforced silicone that can never suck shut. Featuring a full 3.5-inch design, this intake outflows all other aftermarket options. Increase performance and listen to that turbo flow! FITS 2/3/4/5/7/8 40i MODELS ! - Professional installation is recommended. - NO REMOVAL OF VBRACE. - NO BUMPER REMOVAL IS NEEDED.

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

Line From Engine Block-Turbocharger

T#:536487

Part#: 11537643177

Ships in 1-2 days

4% off MSRP $ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.99 USD

Add to Wish List

Qty

4% off MSRP

$ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.99 USD

Add to Wish List

Line - Turbocharger-Coolant Pump

T#:536493

Part#: 11538666857

Ships in 1-2 days

4% off MSRP $ 138.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

4% off MSRP

$ 138.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Genuine BMW Intake Air Filter - BMW G01 G02 G30 G32

For vehicles with the later B58C engine - Not compatible with the earlier B58 Gen 1 engine

T#:548999

Part#: 13718691835

Ships in 1-2 days

13% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Qty

13% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Engineered to exact specifications, this air filter element ensures efficient filtration and maximum airflow to the engine. Keep your BMW running smoothly and efficiently with this genuine BMW part.

High Flow Water Methanol Check Valve (Nylon Line)

T#:21374130

Part#: SNO-8CV

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Billet 100 Micron Water Methanol Filter

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Black High Temp Nylon Water Methanol Tubing - 20'

T#:20815165

Part#: SNO-80088

Special Order: No Guaranteed ETA

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Snow Performance 20' Bag High Temp Nylon Water Methanol Tubing 100% Methanol Resistant 800 PSI Burst Rating Black

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Back Ordered

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Line - Turbocharger-Coolant Pump

T#:36913360

Part#: 11538666857

In Stock

Sale - Save 10% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD

Add to Wish List

ECS Tuning Intake Pipe Upgrade - BMW G30 G32 G11/12 G01 G02 G05 B58 3...

T#:6924301

Part#: 090759ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates the OEM sound chamber for increased turbo response and mid-range and top-end power

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

For B58 Gen1 Engines Only (B58A) - Will Not Fit B58 Gen2 Engines (B58TU / B58C / B58D)

For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Intake Pipe - G30 G32 G11 G01 G02 B58

T#:586881

Part#: SG71436

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

G-Chassis B58 Front Mount Intake - Red Tube/Red Filter

T#:38351608

Part#: GB58REDRED

No longer available

Increases airflow and intake noise for your B58 engine!

BMC Drop-In Performance Air Filter - Single Filter - G01/F97 G30/F90 ...

T#:584728

Part#: FB929/20

Back Ordered

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/Ns: 13718577170, 13718577171,13718691835

Show More Show Less

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW G32 640i xDrive B58 3.0L

Sub-Categories

ECS Silicone Coupler

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results