BMW Intake Parts for BMW 3 Series E92 (2007-2013)

Wagner intercoolers (#200001044) are engineered in Germany to be a superior N54/N55 intercooler than the factory part. With 85% more surface area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and Wagner has chosen the stepped design to maximize the available surface area in the front end. The step is a thicker bar and plate core with an additional set of rows on top that takes advantage of unused space in the nose. In our eyes, the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.

Compared to the stock OEM intercooler:


One of the best features of this kit is how easy it is to install (the easiest we have used to date). It's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Core size measures 520 x 210 x150 with a 13.6cm flow rate. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the E90 E92 335! Fits both N54 and N55 cars. 

This FMIC fits the following BMWs:
2008-2012 E82 BMW 135i
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

• Precise injection control for improved performance
• OEM-approved water methanol injection pump for durability
• 100% methanol-resistant components for long-lasting use
• Guaranteed leak-free operation with ACU-SEAL compression fittings
• Increases induction charge density and fuel octane levels for full power

AFE Stage 2 Pro Dry S Intake System improves air flows over the factory components and isolates the intake tube and filter from underhood heat to keep intake air cooler and denser. Improved breathing increases power and torque. Kit includes filter, intake tube, and mounting hardware.

AFE Pro Dry S air filter uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe. High quality perimeter seal prevents filter bypass. Emissions legal in all 50 states.

The air filter must clean 8000-9000 gallons of air for each gallon of gasoline burned inside the engine, without restricting the air intake.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Fits the Following BMWs:

E90 E92 E93 M3

Stock air filters are not designed for getting the highest flow rate possible. This causes air flow restrictions that prevent the highest possible power from the stock design. With COBB's BMW N54 High Flow Air Filter, designed to directly replace the stock air filter ( BMW Part # 13717556961), you can expect the highest flow rates from a stock style design while still maintaining maximum filtration. 

BMW N54 High Flow Filter

• Washable/Reusable Cotton Woven Media
• Precision Molded for Direct Drop In To The Factory Air Box
• Increased Air Flow While Maintaining Filtering Efficiency
• Pre-Oiled
• Compatible with COBB Accessport OTS Maps

Looking to upgrade your intercooler? This Phoenix Racing intercooler designed by Burger Motorsport is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N54/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler.

Phoenix replacement intercoolers are a direct replacement for your factory intercooler and fully reversible. All required hardware is included. 

Dimensions: 20" x 5.25" x 5.25"