Packaged by Turner for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:337981
Part#: 11511436590
Ships in 1 Business Day
Starting at $ 45.99 USD
Free Shipping on orders $49 and up
Starting at $ 45.99 USD
Free Shipping on orders $49 and up
This is the stock water pump pulley that mounts between the engine fan and the water pump. We have seen these plastic or composite pulleys crack around the mounting bolt holes. If left un-noticed the whole pulley can fall apart which will immediately disable the car and possibly leave you stranded. It can also break while performing other work around it such as removing the fan, replacing the water pump, or even just replacing the belt. Replacing this pulley while doing the water pump can be a good preventative measure.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1999-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:556741
Part#: E60N52TISKT
In Stock
$ 282.99

This product was last offered at the strikethrough price on
02-26-2026

$ 269.99 USD
Free Shipping
$ 269.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:401624
Part#: 017367ECS01AKT2
In Stock
Sale - Save 24% $ 102.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.70 USD
Free Shipping
Sale - Save 24%
$ 102.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.70 USD
Free Shipping

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Delrin bushings have almost no deflection and will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

New carrier bushing pins are included.

This item fits the following BMWs:
11/2003-2007 E60 BMW 525i 530i

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
Ships in 1-2 days
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:21670137
Part#: TMSN5SPCOILKT
In Stock
Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:378340
Part#: 11517632426KT3
In Stock
Sale - Save 13% $ 743.03

This product was last offered at the strikethrough price on
03-31-2026

$ 645.99 USD
Free Shipping
Sale - Save 13%
$ 743.03

This product was last offered at the strikethrough price on
03-31-2026

$ 645.99 USD
Free Shipping

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2+
For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank
Packaged by Turner - Corporate Logo
T#:41931264
Part#: SB53A2STG2PKT
In Stock
$ 1,595.99 USD
Free Shipping on orders $49 and up
$ 1,595.99 USD
Free Shipping on orders $49 and up
A go-to solution for BMW enthusiasts who need next-level performance for spirited driving, autocross, or track days—without giving up street manners.
Packaged by Turner - Corporate Logo
T#:24344808
Part#: N54OFHGKT
In Stock
$ 171.45 USD
Free Shipping on orders $49 and up
If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:587400
Part#: N54DPINSTALLKT
In Stock
$ 158.99 USD
Free Shipping
$ 158.99 USD
Free Shipping
This kit includes everything you need to install 2 new downpipes. All parts included are genuine BMW or high-quality aftermarket, and every necessary component is accounted for. See kit contents tab for a list of included components
Show More Show Less

Packaged by Turner - Corporate Logo
T#:401621
Part#: N54CBBKT1
In Stock
Sale - Save 3% $ 217.99

This product was last offered at the strikethrough price on
05-03-2026

$ 210.46 USD
Free Shipping
Sale - Save 3%
$ 217.99

This product was last offered at the strikethrough price on
05-03-2026

$ 210.46 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:338056
Part#: 31126760181
In Stock
Sale - Save 16% $ 85.99

This product was last offered at the strikethrough price on
05-14-2026

Starting at $ 72.42 USD
Free Shipping
Sale - Save 16%
$ 85.99

This product was last offered at the strikethrough price on
05-14-2026

Starting at $ 72.42 USD
Free Shipping
This upper front control arm (BMW may call it a wishbone) comes with the inner bushings and is a direct replacement for the original part, made by Febi-Bilstein.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

This arm includes the outer ball joint and inner rubber bushing.

This item fits the following BMWs:
2004-3/2006 E60 5 Series BMW 525i 530i 545i 550i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338770
Part#: TMS14366
In Stock
Starting at $ 138.86 USD
Free Shipping
Starting at $ 138.86 USD
Free Shipping
Don't up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your 545 and 645 will ensure you get many more silky-smooth miles from your BMW.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • replace drain bolt crush washer
  • reset oil service/maintenance light
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire, including pressure, and tire-changing tools
  • inspect belts for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • lubricate throttle linkage
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
40,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
80,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • inspect main accessory pulleys for cracks
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

You may also want to pick up these other helpful items:
  • E60 Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    2004-2005 E60 BMW 545i
    2004-2005 E63 E64 BMW 645ci
    2002-2005 E65 BMW 745i 745li



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:338773
    Part#: TMS14368
    In Stock
    Starting at $ 139.98 USD
    Free Shipping
    Starting at $ 139.98 USD
    Free Shipping
    Don't up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your 550 and 650 will ensure you get many more silky-smooth miles from your BMW.

    This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • reset oil service/maintenance light
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire, including pressure, and tire-changing tools
    • inspect belts for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • lubricate throttle linkage
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    40,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    80,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • inspect main accessory pulleys for cracks
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement

    You may also want to pick up these other helpful items:
  • E60 Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    2006-2010 E60 BMW 550i
    2006-2011 E63 E64 BMW 650i/ci
    2006-2008 E65 BMW 750i 750li



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554406
    Part#: 24152333903KT2
    In Stock
    Sale - Save 15% $ 310.99

    This product was last offered at the strikethrough price on
    03-31-2026

    $ 262.96 USD
    Free Shipping
    Sale - Save 15%
    $ 310.99

    This product was last offered at the strikethrough price on
    03-31-2026

    $ 262.96 USD
    Free Shipping

    GA6HP26Z Automatic Transmission
    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes the transmission filter, gasket and bolts.

    This item fits the following BMWs:
    E60 BMW 545i 550i 
    E63/4 BMW 645Ci 650i  
    E65/6 BMW 745i/Li 750i/Li 760i/Li 
    E70 BMW 3.5d/dX, 4.8i N62
    E71 BMW 50iX N63

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:337994
    Part#: 11537545665
    In Stock
    Starting at $ 73.99 USD
    Free Shipping
    Starting at $ 73.99 USD
    Free Shipping
    This is the water hose that connects from the water pump to the thermostat in the 535i, X6 35i, 135i, Z4 35i, and 335i. When replacing either the thermostat or water pump, you may also want to replace this hose since it's all in the same area. Add two new hose clamps from the options menu below.

    This item fits the following BMWs:
    2008+ E82 BMW 135i
    2011-2013 E82 BMW 1M Coupe
    2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 335i - Convertible
    2004-2010 E60 BMW 535i 535xi 535i xDrive
    2013+ E84 BMW X1 xDrive35i
    2007-2010 E71 BMW X6 xDrive35i
    2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
    Show More Show Less

    N54 Crank Hub Service Kit - Up To 02/2011
    For vehicles with production date up to 02/2011
    Packaged by Turner - Corporate Logo
    T#:2227021
    Part#: N54PRCRANKT
    In Stock
    Sale - Save 3% $ 156.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 151.69 USD
    Free Shipping
    Sale - Save 3%
    $ 156.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 151.69 USD
    Free Shipping
    All of the components necessary for service when upgrading to an aftermarket crank hub solution.

    Packaged by Turner - Corporate Logo
    T#:637847
    Part#: 11428637820KT1
    In Stock
    $ 178.99 USD
    Free Shipping
    $ 178.99 USD
    Free Shipping
    Packaged by Turner - Corporate Logo
    T#:338779
    Part#: TMS14370
    Ships Today
    Starting at $ 170.98 USD
    Free Shipping
    Starting at $ 170.98 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW-Castrol 10W60 oil or Red Line 10W60 oil
    • replace drain bolt crush washer
    • reset oil service/maintenance light
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C cabin microfilter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect or replace emergency tire repair kit
    • inspect belts for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    30,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW-Castrol 10W60 oil or Red Line 10W60 oil
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
    • replace oil pressure valve filter and o-rings
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    60,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • engine oil change with filter, using OE BMW-Castrol 10W60 oil or Red Line 10W60 oil
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • clean mass air sensor
    • fill and bleed cooling system
    • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • inspect main accessory pulleys for cracks
    • replace oil pressure valve filter and o-rings
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement

    You may also want to pick up these other helpful items:
  • Bentley Service Manual from the E60 (not specific to the M5 but contains relevant info for the chassis, braking, and other systems)
  • We offer many DIY-related tools, specifically for the BMW owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583993
    Part#: 34112282805KT21
    Ships on Dec 4, 2026
    Sale - Save 20% $ 917.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 736.36 USD
    Sale - Save 20%
    $ 917.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 736.36 USD

    Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

    In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338058
    Part#: 31126768297
    Ships in 1 Business Day
    $ 92.99

    This product was last offered at the strikethrough price on
    05-29-2026

    Starting at $ 82.66 USD
    Free Shipping
    Starting at $ 82.66 USD
    Free Shipping
    This upper front control arm (BMW may call it a wishbone) comes with the inner bushings and is a direct replacement for the original part, made by Febi-Bilstein or Lemforder (OEM).

    Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

    This arm includes the outer ball joint and inner rubber bushing.

    This item fits the following BMWs:
    3/2006-2010 E60 5 Series BMW 525i 528i 530i 535i 545i 550i M5 & Wagons
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338143
    Part#: 34216753215
    In Stock at Vendor
    Starting at $ 195.98 USD
    Free Shipping
    Starting at $ 195.98 USD
    Free Shipping
    This is one pair of OEM rear brake rotors/discs for the E60 525i, 528i, 530i rear brake rotors (sold as a pair).

    We offer a choice of brands to satisfy our customer's stringent quality standards -
    Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
    Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes

    These REAR brake rotors/discs fit:
    2004,2005,2006    E60 5 Series - 525i & 530i
    2007,2008,2009+ E60 5 Series - 528i
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338059
    Part#: 31126768298
    Ships in 1 Business Day
    $ 119.99

    This product was last offered at the strikethrough price on
    05-11-2026

    Starting at $ 104.43 USD
    Free Shipping
    Starting at $ 104.43 USD
    Free Shipping
    This upper front control arm (BMW may call it a wishbone) comes with the inner bushings and is a direct replacement for the original part, made by Febi-Bilstein or Lemforder (OEM).

    Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

    This arm includes the outer ball joint and inner rubber bushing.

    This item fits the following BMWs:
    3/2006-2010 E60 5 Series BMW 525i 528i 530i 535i 545i 550i M5 & Wagons
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:640375
    Part#: 113175840841KT1
    Ships in 1 Business Day
    $ 703.48 USD
    $ 703.48 USD
    The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554066
    Part#: 11517838201KT2
    Ships in 3 Business Days
    Sale - Save 30% $ 287.99

    This product was last offered at the strikethrough price on
    04-07-2026

    $ 202.37 USD
    Free Shipping
    Sale - Save 30%
    $ 287.99

    This product was last offered at the strikethrough price on
    04-07-2026

    $ 202.37 USD
    Free Shipping

    The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

    Kit includes:

    • Mahle-Behr thermostat
    • Geba water pump
    • Vaico coolant
    • Mounting hardware required for the water pump
    • O-rings for the thermostat housing

     

    This item fits the following BMWs:
    2005+ E60 BMW M5
    2005+ E63 BMW M6

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:338057
    Part#: 31126760182
    Ships in 1 Business Day
    Starting at $ 104.99 USD
    Free Shipping
    Starting at $ 104.99 USD
    Free Shipping
    This upper front control arm (BMW may call it a wishbone) comes with the inner bushings and is a direct replacement for the original part, made by Febi-Bilstein or Lemforder (OEM).

    Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

    This arm includes the outer ball joint and inner rubber bushing.

    This item fits the following BMWs:
    2004-3/2006 E60 5 Series 525i 530i 545i 550i
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:21513
    Part#: TMS21513
    Ships in 3 Business Days
    $ 1,457.00

    This product was last offered at the strikethrough price on
    07-01-2026

    $ 1,386.65 USD
    Free Shipping
    $ 1,386.65 USD
    Free Shipping
    If you're looking for a little more sport in your sport sedan this E60 shock/spring package will deliver less bodyroll and better handling. This suspension upgrade for the 545i and 550i includes a set of lower and stiffer springs and performance shocks. By stiffening the suspension you reduce the amount of weight transfer - and a heavy car like the E60 likes to throw its weight around. By better managing the weight you can make the car fly around corners.

    H&R Sport springs lower the ride height by 1.3" in front and 1.2" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

    We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

    Parts list:
    • 1 set - H&R Sport Springs (50460)
    • 1 pair - Bilstein Front Sport struts (VE3-A965 / 35-109655)
    • 1 pair - Bilstein Rear Sport Shocks (BE5-A966 / 24-109666)

    Fitment notes: for cars without self-leveling or EDC suspension.
    This package works with Dynamic Drive/Active Roll Stabilization.

    This item fits the following BMWs:
    2004-2010 E60 BMW 545i 550i sedans
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338118
    Part#: 34116753221
    In Stock at Vendor
    Starting at $ 251.98 USD
    Starting at $ 251.98 USD
    This is a pair (2) front brake rotors/discs (324x30mm) for the E60 525i (**auto only), 525Xi, 530i, 528i, 528xi, and 535xi. Price is for the pair.

    We offer a choice of brands to satisfy our customer's stringent quality standards -
    Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
    Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.


    These front brake discs / rotors fit:
    2004-2005 E60 525i **AUTO ONLY**
    2006-2006 E60 525i & 525xi (auto & manual trans)
    2004-2006 E60 530i, 530xi, 530xi wagon (All)
    2007-2009 E60 528i, 528xi, 528i xDrive (All)
    2008-2010 E60 535xi, 535i xDrive
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338079
    Part#: 31226765601
    Ships in 1 Business Day
    $ 190.99

    This product was last offered at the strikethrough price on
    04-06-2026

    Starting at $ 185.80 USD
    Free Shipping
    Starting at $ 185.80 USD
    Free Shipping

    Front Wheel Hub Assembly with Bearing fits BMW E60 5 series and E63 6 series.  Requires 4 wheel bearing hex bolts - #31206779384 per wheel bearing. This bearing can be used on the left or right side. Sold individually.

    FAG is an OE supplier to BMW as well as several other German marques. 

    GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.



    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
    2004-2010 E63 BMW 645ci 650i

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:15744032
    Part#: 261175483920-KT
    Ships in 1-2 days
    $ 528.99

    This product was last offered at the strikethrough price on
    04-15-2026

    $ 525.99 USD
    Free Shipping on orders $49 and up
    $ 525.99 USD
    Free Shipping on orders $49 and up
    This kit includes every thing needed for a complete CV joint install, includes CV Joint, grease, and needed hardware.
    Packaged by Turner - Corporate Logo
    T#:553608
    Part#: 33526779611KT2
    In Stock
    $ 386.99

    This product was last offered at the strikethrough price on
    06-30-2026

    $ 366.99 USD
    Free Shipping
    $ 366.99 USD
    Free Shipping

    This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle. 

     

    For vehicles without EDC only

    Fits the following BMW's

    E60 525i/xi 528i/xi 530i/xi 535i/xi 545i 550i

     

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:24344793
    Part#: S85TBAKT
    Ships in 1-2 days
    $ 1,806.99

    This product was last offered at the strikethrough price on
    07-07-2026

    $ 1,687.99 USD
    Free Shipping on orders $49 and up
    $ 1,687.99 USD
    Free Shipping on orders $49 and up
    If your S85-powered M5 or M6 has recently gone into "limp mode" and tripped some engine codes, you may have a faulty throttle body actuator. The plastic gear teeth become rounded and broken over time, resulting in poor or no throttle response to your input. Replace your throttle body actuators to restore throttle response and prevent any additional operational issues! Included: OEM VDO Throttle Body Actuators Genuine BMW Throttle Body Actuator Arms
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:555771
    Part#: PBTSRKT60
    Ships in 1-2 days
    Sale - Save 10% $ 285.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 258.36 USD
    Free Shipping
    Sale - Save 10%
    $ 285.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 258.36 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

    This kit is perfect to restore your driving pleasure!

    See the included components under Kit Contents below.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:22097556
    Part#: 6PK1548TKT
    Ships on Sep 21, 2026
    $ 129.99 USD
    Free Shipping on orders $49 and up
    Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338080
    Part#: 31226783913
    Ships in 2 Business Days
    Starting at $ 97.06 USD
    Free Shipping
    Starting at $ 97.06 USD
    Free Shipping
    Replacement Front Wheel Bearing for E90 E92 E60 E53 X5 with All wheel Drive models. You will need to replace the locking nut as it cannot be re-used. Typically, the clirclip can be re-used but we offer it in case you would like to replace it.

    This item fits the following BMWs:
    2006+ E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive
    2007+ E92 BMW 328xi 328i xDrive 335xi 335i xDrive
    2004-2010 E60 BMW 525xi 530xi 528xi 528i xDrive 535xi 535i xDrive
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:584180
    Part#: 11287838226KT4
    Ships in 1-2 days
    $ 905.99 USD
    Free Shipping
    $ 905.99 USD
    Free Shipping
    Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:21735862
    Part#: CAMGSKTN55S55KT
    Ships in 1-2 days
    $ 1,209.99 USD
    Free Shipping on orders $49 and up
    When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:555770
    Part#: PBTSRKT59
    Ships in 1-2 days
    Sale - Save 8% $ 273.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 251.52 USD
    Free Shipping
    Sale - Save 8%
    $ 273.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 251.52 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:555764
    Part#: PBTSRKT53
    Ships in 1-2 days
    Sale - Save 8% $ 267.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 245.87 USD
    Free Shipping
    Sale - Save 8%
    $ 267.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 245.87 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:10942247
    Part#: 24152333903KT3
    In Stock
    $ 228.99

    This product was last offered at the strikethrough price on
    03-09-2026

    $ 227.99 USD
    Free Shipping
    $ 227.99 USD
    Free Shipping

    Packaged by Turner - Corporate Logo
    T#:556716
    Part#: E6XMTISKT
    Ships on Oct 6, 2026
    Sale - Save 2% $ 1,271.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,240.41 USD
    Free Shipping
    Sale - Save 2%
    $ 1,271.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,240.41 USD
    Free Shipping

    Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

    To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

    See kit contents below for a complete list of included components.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:24112776
    Part#: E9XN52SMFKT
    Ships in 4 Business Days
    $ 1,691.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 1,666.99 USD
    Free Shipping on orders $49 and up
    $ 1,666.99 USD
    Free Shipping on orders $49 and up
    Dual-mass flywheels allow for fluid-feeling clutch engagements and offer a more luxurious feel than single-mass flywheels. However, with these benefits come significant drawbacks. Dual-mass flywheels are expensive, with the cost of replacement often being double or triple that of converting to a single-mass flywheel. Single-mass flywheels can be resurfaced, eliminating the need to replace them with the next clutch service, something that is not recommended with dual-mass flywheels as they contain a rubber section that is more failure-prone in high-mileage applications. Single-mass flywheels lack the complexity of dual-mass flywheels, making them inherently more reliable. Dual-mass flywheels contain a rubber damper or hub that will, like all rubber components, wear out with time. Also, Many enthusiasts prefer to eliminate BMW's "Self Adjusting Clutch", which has been known to provide an unpredictable, inconsistent engagement point. Valeo's conversion kit has been designed to maintain nearly identical clutch and flywheel weight, ideal for keeping the clutch quiet and easy to drive. Kit contents: Single-mass flywheel Non-Self Adjusting Clutch and pressure plate Throw out bearing Pressure plate bolts Flywheel bolts Transmission service kit Guide tube Input and output shaft seals Pilot bearing Clutch fork pivot pin Mounting bolt set
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:640351
    Part#: 11317584084KT3
    In Stock
    Sale - Save 19% $ 595.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 484.55 USD
    Free Shipping
    Sale - Save 19%
    $ 595.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 484.55 USD
    Free Shipping
    Timing chains can cause catastrophic problems with your N52 engine if it doesn't function properly. Common symptoms of failure include excessive vibration or “slap” from the timing chain, and the possibility of plastic particles throughout the oil. Symptoms typically begin to surface between 80,000 and 100,000 miles. If left untouched, the issue can compound itself so far as to allow the timing chain to jump out of time, leaving you with a potentially damaged head and larger repair costs. This kit has been assembled using genuine BMW and high quality aftermarket components. From new timing chain guides, to a replacement oil pan drain plug, this kit has you covered to assure that all the needed parts are on hand and ready to install.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:16580
    Part#: E60-M5-UDP-BELTS
    Ships in 5 Business Days
    Sale - Save 3% $ 49.95

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.44 USD
    Free Shipping on orders $49 and up
    Sale - Save 3%
    $ 49.95

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.44 USD
    Free Shipping on orders $49 and up
    These are the replacement drive belts used in our Turner Pulley Kit on the S85 V10 engine (E60 M5 and E63/E64 M6). These belts are shorter than the stock belt since our underdrive crank pulley is a larger diameter than stock. Because of the different lengths, you cannot use a stock belt with the Pulley Kit. This set of belts includes the main drive belt (6PK-1400) and the A/C belt (6PK-1045).

    This belt set fits the following BMWs with the Turner Pulley Kit:
    2006-2010 E60 BMW M5
    2004-2011 E63 E64 BMW M6
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557220
    Part#: E6XN52BCKT
    Back Ordered
    Sale - Save 2% $ 685.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 670.84 USD
    Free Shipping
    Sale - Save 2%
    $ 685.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 670.84 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:21703017
    Part#: N54CAMBRINGKT
    Ships in 1-2 days
    $ 1,650.31 USD
    Free Shipping on orders $49 and up
    Maintaining your BMW E6X, E8X, E9X, or Z4 engine health is paramount to ensure optimal performance and longevity. Two crucial components that require periodic attention are the cam bearing ledge and valve cover gasket. Regular servicing of these components, along with other critical elements such as the camshaft O-ring, chain tensioner (with gasket), and oil filter, is imperative to keep your BMW running smoothly. Included in Kit: 1 - Cam Bearing Ledge - Exhaust 29 - Torx Bolt 1 - Genuine Cam Bearing Ledge - Intake 1 - Genuine Cam Bearing Ledge - Exhaust 1 - Valve Cover Gasket 4 - Genuine Camshaft O-rings 7 - Genuine BMW TwinPower Turbo 5W-30 Engine Oil 1 - Assembly Lube 1 - Chain Tensioner - With Gasket Ring 1 - Hengst Oil Filter 2 - Collar Screws Cam Bearing Ledge: The cam bearing ledge is vital for proper camshaft support and lubrication. Over time, wear and tear can compromise its effectiveness, potentially leading to camshaft damage. Servicing this component ensures that your camshaft operates optimally, preventing costly repairs. Valve Cover Gasket: A well-maintained valve cover gasket is essential to prevent oil leaks and maintain proper sealing in the engine. Ignoring gasket issues can lead to oil contamination, loss of engine performance, and even engine damage. Camshaft O-Ring: The camshaft O-ring helps maintain proper oil pressure and prevents oil leakage. A deteriorated O-ring can result in oil seepage, leading to lubrication issues that affect engine performance and longevity. Chain Tensioner (with Gasket Ring): Proper timing chain tension is crucial for engine synchronization. Servicing the chain tensioner and its gasket ensures correct timing, preventing potential engine misfires and damage. Oil Filter: Regularly replacing the oil filter is fundamental to maintaining clean engine oil. Clean oil is essential for lubrication and heat dissipation, safeguarding the engine against wear and tear. Kit is for these BMW models: E60 / E61 - N54 3.0L E82 / E88 - N54 3.0L E90 / E92 / E93 - N54 3.0L Z4 - N54 3.0L
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:22163416
    Part#: 4485241TKT
    In Stock
    Sale - Save 23% $ 177.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 136.47 USD
    Free Shipping on orders $49 and up
    Sale - Save 23%
    $ 177.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 136.47 USD
    Free Shipping on orders $49 and up
    Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583994
    Part#: 34112282805KT22
    Ships on Oct 6, 2026
    Sale - Save 17% $ 1,940.77

    This product was last offered at the strikethrough price on
    04-09-2026

    $ 1,612.36 USD
    Free Shipping
    Sale - Save 17%
    $ 1,940.77

    This product was last offered at the strikethrough price on
    04-09-2026

    $ 1,612.36 USD
    Free Shipping
    Packaged by Turner - Corporate Logo
    T#:41695009
    Part#: EUROHEADSET1KT
    Ships on Oct 20, 2026
    Sale - Save 18% $ 124.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 102.15 USD
    Free Shipping on orders $49 and up
    Sale - Save 18%
    $ 124.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 102.15 USD
    Free Shipping on orders $49 and up
    Exceptional tools designed to handle all types of European fasteners with ease.


    Packaged by Turner - Corporate Logo
    T#:338357
    Part#: 31222282670
    Ships on Oct 26, 2026
    Sale - Save 32% $ 301.99

    This product was last offered at the strikethrough price on
    03-04-2026

    Starting at $ 204.39 USD
    Free Shipping
    Sale - Save 32%
    $ 301.99

    This product was last offered at the strikethrough price on
    03-04-2026

    Starting at $ 204.39 USD
    Free Shipping
    This is the direct replacement wheel bearing and hub assembly to fit the front of the E60 M5, E63 M6, E82 1M, and E90/E92 M3. We sell the OE BMW or OEM F.A.G. bearing so you get the highest quality part available. This is the hub with the bearing and it bolts to the carrier (new hardware is recommended, see below).

    Replace your wheel bearings when you hear groaning or rumbling sounds from the front. These sounds increase in frequency as speed increases and will get louder as you turn the wheel (and put load on the worn side). Failing wheel bearings can also attribute to annoying 'pad knockback' on the track.

    Sold per bearing/hub.

    This item fits the following BMWs:
    2008-2012 E82 BMW 1M Coupe
    2006-2011 E90 BMW M3 - Sedan
    2007-2013 E92 BMW M3 - Coupe
    2007-2013 E93 BMW M3 - Convertible
    2004-2010 E60 BMW M5
    2004-2011 E63 BMW M6
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340365
    Part#: TMS16432
    Back Ordered
    Starting at $ 857.54 USD
    Free Shipping
    Starting at $ 857.54 USD
    Free Shipping

    This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

    Our water pump/thermostat overhaul includes:

    • OEM VDO electric water pump, p/n 11517588885 or 11517632426
    • OEM mounting screws for water pump (set of 3), p/n 11517602123
    • OEM Behr thermostat, p/n 11537549476
    • Original BMW connecting hose from thermostat to water pump, p/n 11537545665
    • Original BMW hose clamps for hose (x 2)
    • BUY AS A PACKAGE AND SAVE $$!

      The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

      How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

      This water pump package fits the following BMWs with the N54 engine:
      2007-2010 E60 BMW 535i 535xi 535i xDrive
      2008-2010 E82 BMW 135i
      2011-2012 E82 BMW 1M Coupe
      2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
      2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
      2007-2010 E93 BMW 335i - Convertible
    Show More Show Less