BMW Air Filters

Our Performance CSL Air Filters start with a multi-layer oiled cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Oiled High Flow Air Filter. These filters can be cleaned, oiled and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Apply new filter oil
Ready to reinstall for a fresh drive!

High flow filter replacement to get your engine breathing better than new!

Replace your dirty, restrictive, factory air filter with the ECS Tuning Exact-Fit High Flow Dry Air Filter!

Proper air intake flow will help your engine breathe better, improving power through the power band and improving fuel economy.

Higher flow than stock paper filters, this reusable filter will show an increase in performance immediately. An easy performance modification that is a direct replacement for your OEM filter.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters do allow slightly better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards. This filter will save you money by no longer needing to replace a paper filter.

Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.

Both dry and oiled filters flow better than stock and can be reused.

Key Features:

Direct replacement for the OEM filter

Higher flow than OEM

Dry air filter

Reusable

Only needs cleaning every 50,000 miles under normal highway driving conditions

Upgrade your engine's performance and efficiency by swapping out your restrictive factory air filters with the ECS Tuning Exact-Fit High-Flow Oiled Air Filter Set!

Enhanced airflow is key to helping your engine breathe more freely, leading to noticeable gains in power across the entire RPM range and improving fuel efficiency.

These reusable filters outperform stock paper filters by delivering superior airflow, instantly boosting your vehicle’s performance. Designed as a straightforward upgrade, they fit directly in place of your OEM filters. Highlights:

Direct OEM replacement Increased airflow compared to stock filters Fully reusable design Requires cleaning only every 50,000 miles under standard highway conditions Don’t forget to explore our complete range of filter-cleaning products to keep your filters in top shape!

*Note: For vehicles equipped with MAF sensors, ensure that the filter oil has fully dried before installation to avoid potential damage to the sensor and the possibility of triggering a check engine light.

Upgrade your BMW's air intake system with the Turner Motorsport Exact-Fit High Flow Oiled Air Filter! This performance filter replaces your factory air filter, providing better airflow for improved engine breathing, increased power, and enhanced fuel economy. It's a direct replacement for the OEM filter, ensuring easy installation and immediate performance gains.

Benefits:

• Higher airflow than stock paper filters
• Reusable design saves money on filter replacements
• Oiled filter offers superior airflow compared to dry filters
• Requires cleaning only every 50,000 miles under normal highway driving conditions
• Compatible with vehicles equipped with MAF sensors

Key Features:

• Direct replacement for the OEM filter
• Oiled air filter for maximum airflow
• Reusable design for long-lasting performance
• Easy maintenance with occasional cleaning

Ensure your BMW performs at its best with the Turner Motorsport Exact-Fit High Flow Oiled Air Filter!

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

750iL/850i requires 2 filters

Product Description

+ Replacement right air filter for D760-0047 High Flow Carbon Fiber Intake.
+ Should be installed in tandem with the left air filter as the same time (D401-0024)
+ Installation time is 0.25 hours (pair).