BMW Engine Parts for BMW Z Series E36/7 (1996-2002)

BMW Oil Pan Gasket

T#:15247119

Part#: 11131720519

Special Order: No Guaranteed ETA

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replace your oil pan gasket anytime upon removal or reinstallation or at any sign of leaks to prevent further issues.

Elring Oil Pan Center Cover Gasket - BMW E46 M3 Z3M S54 3.2L ...

T#:45517824

Part#: 747.621

Special Order: No Guaranteed ETA

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

This is the gasket placed between the oil pan center cover and oil pan Replaces BMW # 11137832023

Elring Lower Timing Cover Gasket - Right - BMW S54 3.2L

T#:45244568

Part#: 612.050

Special Order: No Guaranteed ETA

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Seals the lower timing cover to the engine block. Recommended to be replaced any time the lower timing cover is removed. Replaces BMW # 11141407693

MAHLE PowerPak Piston Kit 87.25mm with Thermal Barrier Coating (TBC) ...

T#:2958768

Part#: 930286145T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Elring Crankshaft Seal - Front - BMW M42 M44

T#:45517829

Part#: 214.680

Special Order: No Guaranteed ETA

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

The front seal or crankshaft seal is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking its territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the pulley surfaces. Replace yours and keep your oil in your engine. The perfect time to replace this seal is when you are doing a timing replacement. You already have everything apart, so you might as well add this piece even if it hasn't failed yet as a bit of preventative maintenance. Replaces BMW # 11141439570

Show More Show Less

Oil Drain Plug - E46 E60 E63 E64 E9X Z3 Z4

T#:45415232

Part#: 774.480

Special Order: No Guaranteed ETA

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Replace your stripped plug and prevent further leaks Replaces BMW # 07119904550 & 07119904351

Elring Oil Filter Housing O-Ring - BMW M42 M44

T#:45415247

Part#: 452.080

Special Order: No Guaranteed ETA

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Seals the oil filter housing to the engine block Replaces BMW # 11421709513

Elring Gasket Ring - BMW E34, E36, E39, E46, E53, E83, E85

T#:45483602

Part#: 445.430

Special Order: No Guaranteed ETA

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

This gasket ring seals the engine beauty cover to the valve cover where the oil filler opening is located. This helps prevent oil that is spilled during oil changes from leaking down between the beauty cover and valve cover. Replaces BMW # 11127526447

Show More Show Less

Elring Dipstick O-Ring Seal - BMW M42 M44 M5X M60 M62 S50/52/54 S62 ...

T#:45244496

Part#: 748.935

Special Order: No Guaranteed ETA

$ 1.11 USD

Add to Wish List

Qty

$ 1.11 USD

Add to Wish List

The small o-rings that seal the dipstick to the guide tube can become brittle from heat and crack, leading to a leak. Replace it with this Elring o-ring to ensure a tight seal and prevent oil from coating the side of your engine. Replaces BMW # 11431717666

Show More Show Less

Elring Engine Oil Drain Plug - M12x1.5x18mm - BMW E39 E24 Z3 ...

T#:44733251

Part#: 587.270

Special Order: No Guaranteed ETA

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

If your engine oil pan's drain plug is rounded off or has damaged threads, this replacement from Elring is a great option to get your BMW back on the road leak-free. Replaces BMW p/n 11131273093. NOTE: Sealing washer not included - see BMW # 07119963151

Show More Show Less

Elring Oil Filter Housing Gasket - E30, E36, Z3

T#:45483643

Part#: 748.811

Special Order: No Guaranteed ETA

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The gasket between the oil filter housing and the engine block should be replaced anytime the oil filter housing is removed or anytime there is a sign of a leak Replaces BMW # 11421709800

Mahle Piston Ring - S52 - 3.2L - Priced Each

T#:40782376

Part#: 01977599-1

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

Whether you're restoring a classic BMW or building a high-revving performance engine, Mahle’s engineering excellence ensures you get factory-level performance with race-proven quality.

Performance Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E4...

T#:22097548

Part#: 11281706545TKT

Back Ordered

Sale - Save 8% $ 263.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.79 USD

Add to Wish List

Qty

Sale - Save 8%

$ 263.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.79 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes everything you need to service the belt drive system and keep everything in check, including the updated Hydraulic tensioner to keep your E46 driving like a dream. This kit also includes ECS Tuning's Kevlar reinforced belt for longer life and resistance. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Cat Cams M52B28 Sport Camshaft Set

T#:25805789

Part#: 1304211

Special Order: No Guaranteed ETA

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

Upgrade your M52B28 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Sport cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the valve timing: M52 /B28: from 115° to 90° (exhaust: 105° fix) The data are shown for full intake retard (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! Duration Intake @ .1mm: 240° Exhaust @ .1mm: 240° Intake @ 1mm: 203° Exhaust @ 1mm: 203° Lift Intake: 9.25mm Exhaust: 9.25mm Lobe Angle Intake: 110° Exhaust: 105°

Show More Show Less

Sport camshaft set 255/248 10.50mm/10.00mm - Z3 1.9 E36 318i ...

T#:578598

Part#: 1301711

Special Order: No Guaranteed ETA

$ 1,170.00 USD

Add to Wish List

Qty

$ 1,170.00 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams M52B28 Sport Camshaft Set

T#:25805790

Part#: 1304212

Special Order: No Guaranteed ETA

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

Upgrade your M52B28 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Sport cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the valve timing: M52 /B28: from 115° to 90° (exhaust: 105° fix) The data are shown for full intake retard (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! Duration Intake @ .1mm: 250° Exhaust @ .1mm: 250° Intake @ 1mm: 213° Exhaust @ 1mm: 213° Lift Intake: 9.55mm Exhaust: 9.55mm Lobe Angle Intake: 110° Exhaust: 105°

Show More Show Less

Camshaft Speed Sensor

T#:52832891

Part#: 12141743072

In Stock

Sale - Save 20% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.99 USD

Add to Wish List

Oil Pump Chain

T#:26271802

Part#: 11417576915

In Stock

Sale - Save 23% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.68 USD

Add to Wish List

Qty

Sale - Save 23%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.68 USD

Add to Wish List

2 Pin Connector

T#:33412932

Part#: 61132359999

In Stock

Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

6pc Hook & Pick Set

T#:1855974

Part#: W942

Ships in 7 Business Days

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Includes straight, angled and combination picks

Febi Hydraulic Lifter - E31, E32, E36, E38, Z3

We Price Match - Give Us A Call or Chat!

T#:382362

Part#: 11331712010

Special Order: No Guaranteed ETA

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces noisy or stuck lifters

Febi Fuel Filter - E46, Z3

We Price Match - Give Us A Call or Chat!

T#:382429

Part#: 13327512019

Special Order: No Guaranteed ETA

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Protect your fuel system

Febi Oil Feed Line

We Price Match - Give Us A Call or Chat!

T#:16375106

Part#: 11361705532

Special Order: No Guaranteed ETA

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Feeds oil to the VANOS unit from the oil filter housing. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Febi brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

OEM Febi Vacuum Control Valve - BMW E & F Chassis

We Price Match - Give Us A Call or Chat!

T#:38452808

Part#: 11740396414

Special Order: No Guaranteed ETA

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Ensure optimal performance in your BMW with a new Vacuum Control Valve. This solenoid-operated vacuum control switch is a crucial component used in various applications throughout your vehicle. Designed to meet the high standards of BMW parts, this valve ensures reliable operation and compatibility with your BMW model.

Show More Show Less

Exhaust Valve for 1993-2000 3-series (M50, M52, M52TU)

We Price Match - Give Us A Call or Chat!

T#:1618

Part#: 11341739821

Special Order: No Guaranteed ETA

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replacement exhaust valve in the stock size. Fits all VAN0S versions of the M50/M52/M52TU, including 1993-2000 323, 325, 328 and the E36 M3 3.0/3.2. Also fits E39 528 and Z3 2.3, Z3 2.8, MZ3 (S52 3.2), M Roadster, M Coupe.

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

Show More Show Less

Febi Oil Filter Kit

We Price Match - Give Us A Call or Chat!

T#:16175685

Part#: 11427833769

Special Order: No Guaranteed ETA

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Febi has a comprehensive range of oil filters with OE-matching quality. The best possible filtration performance always guarantees optimal engine operation.

Febi Oil Filter - E30, E36, Z3

We Price Match - Give Us A Call or Chat!

T#:363806

Part#: 11421716192

Special Order: No Guaranteed ETA

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Fits engines with plastic oil filter housing

1/2"/12mm Band Hose Clamp - 90-110mm

T#:377837

Part#: 003402ECS05A-13

Special Order: No Guaranteed ETA

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Secure your hoses with the 1/2"/12mm Band Hose Clamp. This high-quality hose clamp ensures a tight and reliable seal for various applications. With its durable construction and easy installation, it's the perfect solution for securing hoses in automotive, industrial, and household settings. Say goodbye to leaks and enjoy peace of mind with this essential hose clamp.

Ensures a tight and reliable seal
Durable construction for long-lasting use
Easy installation for convenience
Suitable for automotive, industrial, and household applications

Show More Show Less

Schrick Camshaft Set With DLC Rocker Arms - 280/272 Degree 12.5mm Lif...

T#:50731686

Part#: 054995LA-272KT2

Ships on Dec 23, 2026

Sale - Save 8% $ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD

Add to Wish List

Qty

Sale - Save 8%

$ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track, using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These are a direct replacement for the stock camshafts and offer increased flow at mid and higher RPMs, thanks to 12.5mm of valve lift. Unlike 288/280 camshafts, this 280/272 set does not require upgraded valvetrain parts. The profile of these camshafts is quite close to stock CSL specs.

KIT INCLUDES

Schrick 272-Degree Exhaust Camshaft Schrick 280-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

Relief Valve For Media Blaster

T#:640910

Part#: B1100031RELIEF

Special Order: No Guaranteed ETA

Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 12.5mm...

T#:338220

Part#: 0415E1040-00

Ships on Dec 23, 2026

Starting at $ 829.00 USD

Add to Wish List

Starting at $ 829.00 USD

Add to Wish List

E46 M3 Schrick 304 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more agressive than the "standard" Schrick intake cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 14mm Lift ...

T#:340424

Part#: TMS200186

Back Ordered

Starting at $ 3,261.73 USD

Add to Wish List

Starting at $ 3,261.73 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 288 degree intake and 280 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
Schrick rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - S54 288/280 14mm Lift

T#:200186

Part#: TMS200186

Back Ordered

$ 3,261.73 USD

Add to Wish List

Qty

$ 3,261.73 USD

Add to Wish List

NOW LOCATED UNDER T#340424

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 296 Degree, 14.0m...

T#:338219

Part#: TMS201492

Ships on Dec 23, 2026

$ 7,065.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 5,877.86 USD

Add to Wish List

Starting at $ 5,877.86 USD

Add to Wish List

E46 M3 Schrick 296 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 296-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 14.0mm...

T#:338221

Part#: TMS201493

Ships on Dec 23, 2026

Starting at $ 2,432.99 USD

Add to Wish List

Starting at $ 2,432.99 USD

Add to Wish List

E46 M3 Schrick 304 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 304-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 304/296 14mm Lift ...

T#:340425

Part#: TMS200183

Ships on Dec 23, 2026

Starting at $ 4,865.48 USD

Add to Wish List

Starting at $ 4,865.48 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 304 degree intake and 296 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with no VAN0S and with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
New Schrick or BMW rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - E46 323/328 M52TU - 248/248

T#:773

Part#: E46M52TUSCHRICK

Ships on Dec 23, 2026

$ 2,915.38 USD

Add to Wish List

Qty

$ 2,915.38 USD

Add to Wish List

M52TU Schrick Camshaft Set. 248 degree 10mm lift intake, 248 degree exhaust. Great for street use. Power gains across the board with calm idle. No need for upgraded valve train. Works perfect for 323 / 328!

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
1999-2000 E39 BMW 528i
1999-2000 Z3 BMW Z3 2.3 Z3 2.8

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 14.0mm...

T#:338223

Part#: TMS201494

Back Ordered

Starting at $ 829.00 USD

Add to Wish List

Starting at $ 829.00 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 288-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

BMW S50/S52 6 Cyl. 308-Degree - Exhaust Camshaft

T#:26671615

Part#: 0284A1080-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 308 Duration Exhaust @ 1mm - 274 Exhaust Peak Timing - 104 Cam Lobe Lift Exhaust - 13 Valve Lift w/o Valve Clearance Exhaust - 13 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Intake Camshaft

T#:26671614

Part#: 0284E1960-0V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 129 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:23847549

Part#: 0415A180001

Special Order: No Guaranteed ETA

$ 1,876.99 USD

Add to Wish List

Qty

$ 1,876.99 USD

Add to Wish List

BMW S50/S52 6 Cyl. 296-Degree - Exhaust Camshaft

T#:26671613

Part#: 0284A1960-0V2

Special Order: No Guaranteed ETA

$ 1,727.99 USD

Add to Wish List

Qty

$ 1,727.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 296 Duration Exhaust @ 1mm - 266 Exhaust Peak Timing - 76-114 Cam Lobe Lift Exhaust - 12, 4 Valve Lift w/o Valve Clearance Exhaust - 12, 4 Valve Clearance Exhaust - 0, 25

Show More Show Less

Schrick Camshaft Set With DLC Rocker Arms - 288/280 Degree 12.5mm Lif...

Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply

T#:46959286

Part#: 054995LA-288KT2

Ships on Dec 23, 2026

Sale - Save 24% $ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Qty

Sale - Save 24%

$ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start, but will be smooth once at operating temperature.

These Schrick cams were initially developed for the M3 CSL, but they also work well on the US and other non-CSL S54 engines. With more duration, they are a great match to high-flow headers and CSL intake plenum upgrades.

KIT INCLUDES

Schrick 280-Degree Exhaust Camshaft Schrick 288-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

BMW S50/S52 6 Cyl. 316-Degree - Intake Camshaft

T#:554491

Part#: 0284E1160-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 282 Intake Peak Timing - 104 Cam Lobe Lift Intake - 13, 3 Valve Lift w/o Valve Clearance Intake - 13, 3 Valve Clearance Intake - 0, 25

Show More Show Less

A/C Tensioner Pulley

T#:53538115

Part#: 11282245087

Ships on Sep 28, 2026

Sale - Save 20% $ 27.99

This product was last offered at the strikethrough price on
05-30-2026

$ 22.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 27.99

This product was last offered at the strikethrough price on
05-30-2026

$ 22.39 USD

Add to Wish List

Meyle - Accessory Belt - Air Conditioning Compressor 050 005 0865 - E...

T#:40545948

Part#: 11281744986

Special Order: No Guaranteed ETA

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

A high-quality, direct-fit A/C drive belt engineered to deliver reliable compressor performance and long-lasting durability.

Meyle - Auxiliary Belt - E46, E90, E92, E93, Z3, Z4

T#:40546016

Part#: 11287830945

Special Order: No Guaranteed ETA

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

A high-quality, OE-style replacement serpentine belt designed to deliver reliable power to critical engine components, ensuring optimal performance and durability.

Meyle Oxygen Sensor - Post-Cat - E46 E39 X3 X5 Z3 Z4

For vehicles with production date from 09/1998

We Price Match - Give Us A Call or Chat!

T#:5944219

Part#: 11781433940

Special Order: No Guaranteed ETA

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

This is the post-cat oxygen sensor for cylinders 4-6 for BMW E46 E39 X3 X5 Z3 Z4. This item fits the following BMWs: 1999-3/2003 E46 BMW 323i 323ci 325xi 328i 328ci 330i 330ci 330xi 2001-3/2003 E46 BMW 325i 325ci only for cars with M54 engine 1999-2003 E39 BMW 528i 525i 530i 2004-2006 E83 BMW X3 2.5 - Bank 1 Only 2004-2006 E83 BMW X3 3.0i - Bank 1 - Automatic Transmission Only 2000-2006 E53 BMW X5 3.0i 1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 2003-2006 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Meyle - Accessory Belt - Alternator/Water Pump/Power Steering Belt - ...

T#:40579777

Part#: 11281437369

Special Order: No Guaranteed ETA

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Keep your BMW running at its best with the reliability of Meyle. Ideal for daily drivers, weekend cruisers, or performance builds, this accessory belt is the smart choice for dependable engine operation.

Show More Show Less

OEM Mahle Fuel Filter - E46, Z3 M54

T#:367338

Part#: 13327512019

Special Order: No Guaranteed ETA

$ 70.37 USD

Add to Wish List

Qty

$ 70.37 USD

Add to Wish List

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW Z3 (1996-2002)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results