BMW Drivetrain Parts for BMW Z3 (1996-2002)

Looking to eliminate your dual-mass flywheel? Overwhelmed with all the options, but hearing complaints about so many of them with rattling or chatter from them? Problem solved. Introducing the all-new Lightweight Performance Flywheel from ECS Tuning. Engineered in-house with the enthusiast daily driver in mind, this is the perfect option for those wanting a lightweight flywheel without the annoying chatter heard from so many other options on the market. Designed to accommodate all conditions: from Sunday drives through the country, to the abuse of the track. No matter your driving style or ability, this is the flywheel and clutch kit for you.

Key Features:

Eliminates factory dual-mass flywheel for:
Crisper shifts
Improved throttle response
Improved acceleration (We measured a .4s decrease in 0-60 times on an otherwise-stock E36 328i!)
Lower replacement cost
Hardened 4140 Chromoly Steel for excellent engagement feel and wear resistance; zinc plated for corrosion resistance
Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel
Sprung-hub clutch disc to eliminate chatter at idle and reduce driveline shock loading
Weighs in at just 16.5lbs!
SFI tested and certified to ensure safe operation under all conditions
Includes ECS performance flywheel, clutch kit with throwout bearing, pilot bearing and all flywheel and pressure plate hardware
Why is SFI testing and certification important?

The SFI Foundation, Inc. (SFI) is a non-profit organization established to issue and administer standards for the quality assurance of specialty performance and racing equipment. SFI certification indicates a flywheel has been certified using industry-standard SFI Spec 1.1 standards by an independent testing body to ensure quality of both design and materials for flywheels utilized in competitive motorsports.

Having successfully passed SFI certification, this flywheel has an individual SFI serial number found in a laser etching, and on an affixed sticker. This certification means the ECS-engineered flywheel is safe and reliable during the rigors of competitive racing; it's also safe and reliable for years and years of street use.

Lightweight flywheels have proven themselves to be a worthwhile performance enhancement. But with the quicker throttle response and horsepower improvement comes one serious drawback: flywheel chatter. Without the dual-mass flywheel's rubber isolators, a lightweight aluminum flywheel has more rattle than stock. ECS has designed this flywheel using chrom-moly steel and it weighs almost ten pounds less than the stock DMF but not as extreme as full aluminum flywheels. The steel helps dampen vibration and noise so you get near-factory refinement and most of the benefits of a lightweight flywheel: quicker throttle response, better reliability, and more power to the wheels. Zero-balanced and SFI 1.1 certified (material and design has been independently burst tested to ensure quality and safety). This flywheel requires the E34 M5 sprung hub clutch kit. Choose below from the flywheel only or a complete kit.

Modern flywheels are built with additional components that are designed to dampen and minimize vibrations from the engine and transmission. Weight has increased and reliability has decreased. With additional weight more energy is required for it to move. A lightweight flywheel does away with the dual mass design and its additional mass so more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance. And with a single-mass flywheel the unreliable DMF design is eliminated.

Stock flywheel weight - 25.0lbs
ECS flywheel weight = 16.55lbs

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed) 

All sets of 12 now 10% off regular price!

Add to your limited slip differential to improve the fluid and wear prevention!

Features:

• Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
• High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
• Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
• Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
• Exceed API GL-5 specifications
• Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
• 4 oz. bottle

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the OVAL shifter carrier bushings (some BMW models have round bushings).

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic M3
1999-2002 E46 BMW 328i 328ci 330i 330ci
2001-2006 E46 BMW M3
1997-2003 E39 BMW 540i M5
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
1999-2003 E52 BMW Z8

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. 

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.

The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.

This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.

While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.

• Faster acceleration: Reduces the rotational mass for quicker engine response.
• Improved throttle response: Engine revs more freely and builds RPM faster.
• Enhanced performance: More power delivered to the wheels for better driving dynamics.
• Cost-effective maintenance: Compatible with factory BMW organic clutches and can be resurfaced.
• Direct replacement: Easy upgrade with no modifications required.

Vehicle Compatibility:

• 1996-1999 E36 BMW 328i, 328is, 328ic
• 1997-1998 Z3 BMW Z3 2.8

Turner Motorsport Doorbuster Kit: Double Adjustable Short Shifter Kit & 389mm DSSR for BMW Z3

Upgrade your BMW Z3’s shifting dynamics with this Turner Motorsport Enthusiast Bundle, which includes the Double Adjustable Short Shifter Kit and 389mm Dual Shear Selector Rod (DSSR). Enjoy enhanced control, adjustable throw, and a precise, connected feel—perfect for anyone looking to take their Z3’s performance to the next level.

TURNER DOUBLE ADJUSTABLE SHORT SHIFTER KIT

BMW’s factory shifters are often known for their long throw, but Turner Motorsport has crafted a solution that redefines the experience. This Double Adjustable Short Shifter offers customizable throw reduction—up to 52%—along with height adjustability, allowing you to dial in the exact feel you want.

A standout feature is the Quick Change rally lever extension. This lets you effortlessly swap between a taller lever, ideal for spirited driving or track days, and a shorter one, for daily use.

Benefits:

Adjustable Throw: From a slight reduction to an ultra-short throw. Crisp Shifts: More precise, quicker shifts for a connected driving experience. Easy Installation: Bearing cup assembly for installation from inside the cabin. Rally Style Option: Switch easily to a taller lever for track-focused driving. Installation and Adjustability:

Height Adjustability: 22mm range for knob height fine-tuning. Throw Adjustability: Independently adjustable throw using a set screw on the shifter ball—no need to remove the shifter. Total Adjustment Range: Up to 52% throw reduction compared to the stock E36 shifter. Design Features:

Materials: CNC-machined 4140 chromoly steel, 304 stainless steel shifter ball, Nylatron® NSM bushings. Anodized Aluminum: 6061-T6 aluminum levers and bearing cup, ensuring durability and corrosion resistance. Knob Compatibility: Compatible with OE BMW and most aftermarket knobs, with a Quick Change rally lever featuring a black Delrin knob. TURNER 389MM DSSR FOR Z3

Turner Motorsport’s 389mm DSSR is designed to provide a superior shifting experience over the factory selector rod. This Dual Shear Selector Rod (DSSR) is crafted for the Z3 6-cylinder models (replacing part #25111222780), offering better control and eliminating unwanted play.

The DSSR works by “sandwiching” the shifter’s connection points, stabilizing the entire mechanism and enhancing the direct feel of each shift. Pair it with Turner’s poly rear shifter bushing for an even more refined experience.

Benefits:

Enhanced Shift Feel: Reduces deflection and play, resulting in more precise shifts. Compatible with Factory and Turner Shifters: Matches the 389mm length for factory knob positioning. Corrosion Resistance: Made from 303 stainless steel for longevity and durability. Design Features:

Driver-Centered Lean: Maintains a 5-degree lean toward the driver for natural ergonomics. Laser-Etched Branding: Includes Turner Motorsport’s logo for a premium, authentic look. Why Choose the Turner Motorsport Short Shifter Kit and DSSR?

With this kit, you’re not only getting a fully adjustable short shifter to make your driving more responsive and engaging, but also a high-quality DSSR for reinforced stability. This combo is perfect for drivers who demand precision, control, and an elevated connection with their Z3’s transmission.

Revolutionize your shifting experience—Turner Motorsport has you covered with engineering, performance, and durability.

BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.

• Improved Performance: Upgrades the factory clutch fork pivot pin to deliver a more precise and responsive clutch operation.
• Enhanced Reliability: Built to withstand the demands of both daily driving and spirited driving, offering greater durability over OEM components.
• Quality Construction: Made from high-quality materials to ensure long-lasting performance and resistance to wear and tear.
• Direct Fit: Designed specifically for BMW E36 and E46 models, ensuring a perfect fit with no modifications required.
• Enhanced Driving Experience: Reduces clutch play and enhances engagement feel, contributing to a more engaging driving experience.

Installation Note: Designed for street use and compatible with standard clutch systems.

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit from Turner Motorsport offers a high-performance solution with a lightweight design for improved throttle response and exceptional torque capacity. Ideal for high-performance racing applications, this kit provides the ultimate balance between drivability and power.

• Lightweight Design: Enhances throttle response and overall driving dynamics.
• High Torque Capacity: Supports up to 340 ft/lbs of torque, making it suitable for performance-driven applications.
• Precision Engineering: Features the latest pressure plate design and friction material for optimal balance between drivability and performance.
• Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.

Specifications:

• Clutch Disc Diameter: 9.448"
• Clutch Disc Spline: 10
• Disc Material: Organic
• Disc Type: Sprung Solid
• Input Shaft Diameter: 1.140625"
• Flywheel Step: -3.8mm
• Maximum Torque Capacity: 340 ft/lbs
• Recommended Use: Street Use

Includes:

• Single Mass Flywheel
• 1 Sprung Organic Clutch Disc
• Pressure Plate
• Flywheel Bolts
• Pressure Plate Bolts
• Release Bearing
• Alignment Tool
• Clutch Spline Grease

XClutch performance upgrades are developed with over 30 years of experience and advanced testing facilities, offering top-notch engineering for both street and race applications.

BMW E36 M3 Z3 XACT Flywheel Streetlite is a high-performance upgrade designed to enhance engine response and acceleration. This Streetlite flywheel is significantly lighter than the stock flywheel, offering superior durability and strength. Crafted from Chromoly Steel, it provides excellent heat tolerance and rigidity, making it ideal for both street and drag racing applications.

• Improved Performance: Noticeably enhances engine response and acceleration with minimal gear rattle.
• Durability: Heat-treated forging ensures strength and toughness, while induction-hardened ring gears extend lifespan.
• Quality Construction: One-piece design prevents failure, ensuring uniform heat transfer and preventing issues like warped inserts or loose ring gears.
• Recommended Use: Suitable for both street and race applications.
• ACT Advantage: Forged, CNC machined, and dynamically balanced for reliable high RPM performance.

Specifications:

• Product Weight: 15.2 lbs
• Material: Chromoly Steel
• Friction Surface Diameter: 9.4 inches (240 mm)
• Flywheel Type: Streetlite
• Tooth Quantity: 113
• Warranty: 12 Months
• SFI Rating: 1.1