BMW X Series E83 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

OEM VDO Camshaft Position Sensor - B58/48(6)/38 N20
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:373726
Part#: 13627525014
Ships on Oct 28, 2026
$ 53.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 53.99 USD
Only available at this price
Free Shipping on orders $49 and up

A faulty camshaft position sensor will result in timing issues and rough idle/engine operation or light up the check engine light. Get rid of your check engine light and restore smooth operation with this OEM VDO sensor.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM VDO Throttle Body -- M54 BMW
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:374291
Part#: 13547502445
Ships in 4 Business Days
$ 335.78

This product was last offered at the strikethrough price on
07-06-2026

$ 269.11 USD
Only available at this price
Free Shipping
$ 269.11 USD
Only available at this price
Free Shipping

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
VDO - Corporate Logo
T#:5973254
Part#: 310-106
In Stock
$ 37.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 37.99 USD
Only available at this price
Free Shipping on orders $49 and up

SingleViu 80mm 6000RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640955
Part#: A2C3833010030
Ships on Sep 28, 2026
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping

VDO - Corporate Logo
T#:14920
Part#: 13547502444
Ships on Sep 30, 2026
$ 520.99 USD
Only available at this price
Free Shipping
$ 520.99 USD
Only available at this price
Free Shipping

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM VDO Mass Air Flow Sensor (MAF) -- BMW M54 03/2003+
For Pre-LCI vehicles only
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:371938
Part#: 13627566983
In Stock at Vendor
$ 360.99

This product was last offered at the strikethrough price on
04-20-2026

$ 298.70 USD
Only available at this price
Free Shipping
$ 298.70 USD
Only available at this price
Free Shipping

The mass air sensor/meter measures the volume of air being fed into the engine so that the fuel levels can be adjust for optimal performance. A faulty sensor can lead to improper fuel mixture and rough idle and poor performance and gas mileage. Replace your faulty sensor with a high quality OEM VDO sensor to restore normal operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

For BMW's with the M54 motor with a production date after 03/2003.

Show More Show Less

VDO - Corporate Logo
T#:656143
Part#: A2C3833340030
Ships on Sep 28, 2026
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping
OEM VDO Fuel Injector - BMW M54
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:372905
Part#: 13537546245
Back Ordered
$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 139.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 139.99 USD
Only available at this price
Free Shipping on orders $49 and up

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. Restore your vehicles fuel system back to top shape with OEM VDO fuel injectors.

OEM replacement for BMW part # 13537546245 and 13641439800.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

For BMW's with the M54 engine - E46 E39 E60 E65 E66 E83 E53 Z3 Z4

Show More Show Less

APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 6 Business Days
$ 469.00 USD
Only available at this price
Free Shipping
$ 469.00 USD
Only available at this price
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 6 Business Days
$ 459.00 USD
Only available at this price
$ 459.00 USD
Only available at this price
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Windshield Washer Pump
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:31589395
Part#: 67128362154
Ships on Sep 23, 2026
$ 37.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 37.99 USD
Only available at this price
Free Shipping on orders $49 and up
VDO - Corporate Logo
T#:656142
Part#: A2C3833350030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping


VDO - Corporate Logo
T#:640514
Part#: A2C3832700030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping
Mass Air Flow Sensor - Pre-Secondary Air Pump
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:31158756
Part#: 11721438814
Special Order: No Guaranteed ETA
$ 81.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 81.99 USD
Only available at this price
Free Shipping on orders $49 and up
APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 6 Business Days
$ 1,876.00 USD
Only available at this price
$ 1,876.00 USD
Only available at this price
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45

OEM VDO Throttle Body -- N52 N51
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:393694
Part#: 13547556118
Back Ordered
$ 335.99

This product was last offered at the strikethrough price on
05-07-2026

$ 272.11 USD
Only available at this price
Free Shipping
$ 272.11 USD
Only available at this price
Free Shipping

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM VDO Fuel Injection Valve - M52 M54
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:7219
Part#: 13537546244
Back Ordered
$ 146.99

This product was last offered at the strikethrough price on
05-07-2026

$ 121.36 USD
Only available at this price
Free Shipping
$ 121.36 USD
Only available at this price
Free Shipping

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. Restore your vehicles fuel system back to top shape with OEM VDO fuel injectors.

OEM replacement for BMW part # 13537546244 and 13641427240.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
VDO - Corporate Logo
T#:38890879
Part#: A2C3833480030
In Stock
$ 101.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 101.99 USD
Only available at this price
Free Shipping on orders $49 and up

GSP North America - Corporate Logo
T#:389715
Part#: NCV27514
In Stock
$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.99 USD
Only 1 available at this price
Limited Qty Sale
Free Shipping
$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.99 USD
Only 1 available at this price
Limited Qty Sale
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E83 BMW X3

Show More Show Less
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 10 Business Days
$ 9.99 USD
Only available at this price
Free Shipping
$ 9.99 USD
Only available at this price
Free Shipping

APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Back Ordered
$ 459.00 USD
Only available at this price
$ 459.00 USD
Only available at this price
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 6 Business Days
$ 479.00 USD
Only available at this price
$ 479.00 USD
Only available at this price
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 3 Business Days
$ 17.00 USD
Only available at this price
Free Shipping
$ 17.00 USD
Only available at this price
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 6 Business Days
$ 479.00 USD
Only available at this price
Free Shipping
$ 479.00 USD
Only available at this price
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


APEX Wheels - Corporate Logo
T#:201383
Part#: ARC81995ET33SMBK
Ships in 6 Business Days
$ 449.00 USD
Only available at this price
$ 449.00 USD
Only available at this price
19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):20.5
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 6 Business Days
$ 469.00 USD
Only available at this price
Free Shipping
$ 469.00 USD
Only available at this price
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 3 Business Days
$ 15.00 USD
Only available at this price
Free Shipping
$ 15.00 USD
Only available at this price
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 3 Business Days
$ 15.00 USD
Only available at this price
Free Shipping on orders $49 and up
$ 15.00 USD
Only available at this price
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

Window Regulator - Left Front - E83 X3 2.5i 3.0i 3.0si
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:581611
Part#: WR40068
In Stock at Vendor
$ 134.99

This product was last offered at the strikethrough price on
05-07-2026

$ 130.99 USD
Only available at this price
Free Shipping
$ 130.99 USD
Only available at this price
Free Shipping
X3 window regulators are a common failure item. We carry the latest updated Genuine BMW window regulator due to the high failure rate of many aftermarket units.

This item fits the following BMWs:
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
Show More Show Less
APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 6 Business Days
$ 426.00 USD
Only available at this price
Free Shipping
$ 426.00 USD
Only available at this price
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

TPMS Wheel Valve Stem Service Kit
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:20518570
Part#: SE54184
Ships in 2 Business Days
$ 15.00

This product was last offered at the strikethrough price on
05-07-2026

$ 14.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 14.99 USD
Only available at this price
Free Shipping on orders $49 and up
Contains: 1 - Valve Stem Core 1 - Valve Stem Nut 1 - Valve Stem Seal 1 - Valve Stem Cap
SingleViu 100mm 4000RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640525
Part#: A2C3832800030
Special Order: No Guaranteed ETA
$ 228.99 USD
Only available at this price
Free Shipping
$ 228.99 USD
Only available at this price
Free Shipping

VDO - Corporate Logo
T#:640515
Part#: A2C3832710030
Special Order: No Guaranteed ETA
$ 195.99 USD
Only available at this price
Free Shipping
$ 195.99 USD
Only available at this price
Free Shipping

VDO - Corporate Logo
T#:640510
Part#: A2C1800310030
Special Order: No Guaranteed ETA
$ 102.99 USD
Only available at this price
Free Shipping
$ 102.99 USD
Only available at this price
Free Shipping
SingleViu 80mm 300km/h Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640575
Part#: A2C3832950030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping
SingleViu 100mm 140mph Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640533
Part#: A2C3832850030
Special Order: No Guaranteed ETA
$ 229.99 USD
Only available at this price
Free Shipping
$ 229.99 USD
Only available at this price
Free Shipping


SingleViu 100mm 3000RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640524
Part#: A2C3832810030
Special Order: No Guaranteed ETA
$ 228.99 USD
Only available at this price
Free Shipping
$ 228.99 USD
Only available at this price
Free Shipping
VDO - Corporate Logo
T#:656140
Part#: A2C3833320030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping
VDO - Corporate Logo
T#:640945
Part#: A2C3832720030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping

SingleViu 100mm 5000RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640523
Part#: A2C3832790030
Special Order: No Guaranteed ETA
$ 228.99 USD
Only available at this price
Free Shipping
$ 228.99 USD
Only available at this price
Free Shipping

VDO - Corporate Logo
T#:640513
Part#: A2C3832690030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping
SingleViu 100mm 90mph Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640536
Part#: A2C3832870030
Special Order: No Guaranteed ETA
$ 228.99 USD
Only available at this price
Free Shipping
$ 228.99 USD
Only available at this price
Free Shipping

SingleViu 80mm 30mph Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640538
Part#: A2C3832880030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping
SingleViu 80mm 60km/h Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640568
Part#: A2C3832890030
Special Order: No Guaranteed ETA
$ 207.99 USD
Only available at this price
Free Shipping
$ 207.99 USD
Only available at this price
Free Shipping

SingleViu 80mm 90mph speedometer. Retail pack with harness
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640569
Part#: A2C3832900030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping

SingleViu 80mm 120km/h Speedometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640570
Part#: A2C3832910030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping
SingleViu 80mm 160mph speedometer. Retail pack with harness
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640573
Part#: A2C3832930030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping
SingleViu 100mm 2500RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640527
Part#: A2C3832820030
Special Order: No Guaranteed ETA
$ 228.99 USD
Only available at this price
Free Shipping
$ 228.99 USD
Only available at this price
Free Shipping


VDO - Corporate Logo
T#:640519
Part#: A2C3832750030
Special Order: No Guaranteed ETA
$ 101.99 USD
Only available at this price
Free Shipping
$ 101.99 USD
Only available at this price
Free Shipping
SingleViu 80mm 2000RPM Tachometer - Priced Each
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:640948
Part#: A2C3832960030
Special Order: No Guaranteed ETA
$ 205.99 USD
Only available at this price
Free Shipping
$ 205.99 USD
Only available at this price
Free Shipping