BMW X Series E83 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Meyle - Corporate Logo
T#:369703
Part#: 12141709616
Ships on Sep 29, 2026
$ 46.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 46.99 USD
Only available at this price
Free Shipping on orders $49 and up
Does not include O-ring
Meyle Coolant Expansion Tank - E53 X5, E46 M52/54, E83 X3
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369184
Part#: 17117573781
In Stock
$ 66.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 66.99 USD
Only available at this price
Free Shipping on orders $49 and up

We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on.

Other items to consider replacing at the same time are the radiator cap, coolant level sensor, lower radiator hose, coolant temp sensor, and the hose clamps. If your car has an automatic transmission you should also replace the oil cooler thermostat in the radiator frame, which is a common source for leaks.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
BMC - Corporate Logo
T#:590913
Part#: WA250-500
Back Ordered
$ 24.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 24.99 USD
Only available at this price
Free Shipping on orders $49 and up

Meyle Rear Lower Control Arm - E36, E46, E83, Z4
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369355
Part#: 33326770813
Back Ordered
$ 44.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 44.99 USD
Only available at this price
Free Shipping on orders $49 and up
Complete including bushing

Tie rod assembly - left or right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36032368
Part#: 32103444999
Ships on Jan 11, 2027
$ 65.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 65.99 USD
Only available at this price
Free Shipping on orders $49 and up
Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
For vehicles with production date up to 04/2007
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:367404
Part#: 31336752735
Ships on Jan 11, 2027
$ 34.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 34.99 USD
Only available at this price
Free Shipping on orders $49 and up
Direct replacement strut mount with integrated bearing for precise steering feel.

Meyle - Corporate Logo
T#:29267515
Part#: 3002411701
In Stock
$ 58.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 58.99 USD
Only available at this price
Free Shipping on orders $49 and up
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less
Meyle - Corporate Logo
T#:29234294
Part#: 3141370005/S
Ships on Oct 29, 2026
$ 64.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 64.99 USD
Only available at this price
Free Shipping on orders $49 and up
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less

APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 6 Business Days
$ 469.00 USD
Only available at this price
Free Shipping
$ 469.00 USD
Only available at this price
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 6 Business Days
$ 459.00 USD
Only available at this price
$ 459.00 USD
Only available at this price
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Water Pump and Seal - with upgraded metal impeller - MEYLE
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579324
Part#: 11517509985
Ships on Jan 11, 2027
$ 52.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 52.99 USD
Only available at this price
Free Shipping on orders $49 and up

Ensure the optimal performance of your BMW by addressing the crucial component of the water pump. Turner Motorsport provides high-quality water pumps designed to keep coolant flowing smoothly. If left unchecked, a failing water pump can lead to overheating issues, potentially causing damage to engine internals. Common among German vehicles, water pump failure may result in unnecessary visits to the repair shop. Preventive maintenance, especially during timing belt replacements, is essential to avoid rapid coolant temperature rise and potential engine damage.

  • Prevents overheating issues
  • Guards against engine damage
  • Common replacement during timing belt maintenance
  • Ensures smooth coolant flow for optimal engine performance
  • Options for thermostats available on Turner Motorsport's website
  • Convenient coolant replacement options
  • Recommended replacement around 60,000 miles
Show More Show Less
Knock Sensor
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:35964551
Part#: 13627568422
Back Ordered
$ 75.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 75.99 USD
Only available at this price
Free Shipping on orders $49 and up
This sensor detects engine knocking or pinging and adjusts the timing to ensure optimal engine performance and efficiency.


Meyle - Corporate Logo
T#:29267516
Part#: 3001350402
Ships on Jan 11, 2027
$ 195.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 195.99 USD
Only available at this price
Free Shipping on orders $49 and up
Changing the automatic transmission filter and fluid is an important maintenance task that can help ensure the longevity and optimal performance of your vehicle's transmission system. Meyle has made this process easier with their Automatic Transmission Service kits. This kit includes everything necessary to perform a standard transmission drain and fill. Included: 6L of Meyle's Specially Formulated Transmission Fluid Meyle Transmission Filter Transmission Pan Gasket Drain Plug Installation Hardware Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less
Meyle Universal Flex Disc - E6X E83
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:390155
Part#: 26117542238
Ships on Jan 11, 2027
$ 100.99 USD
Only available at this price
Free Shipping
$ 100.99 USD
Only available at this price
Free Shipping

Located between the transmission and driveshaft, the giubo (also guibo) joint is a flexible rubber drive coupling that joins driveline components to reduce vibration, while allowing a limited range of flexibility. Joint rubber deteriorates over time from torque stress and heat hardening. A failed joint is a common cause of driveline noise and vibration.

This joint should be inspected during normal maintenance for signs of heat cracking and tears in the rubber. Failed joints should be replaced before they cause additional damage and expense or disable the vehicle.

Show More Show Less
Meyle - Corporate Logo
T#:27138537
Part#: 3001350314/SK
Ships on Jan 11, 2027
$ 146.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 146.99 USD
Only available at this price
Free Shipping on orders $49 and up
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. This high-quality Meyle transmission filter is quintessential for a correct and full service. Included: Meyle Transmission Filter Transmission Pan Gasket Drain Plug & Fill Plug Installation Hardware Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less

Meyle Blower Motor Resistor - BMW E39 E46 E83 E53
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:370967
Part#: 64116923204
Ships on Jan 11, 2027
$ 47.99 USD
Only available at this price
Free Shipping
$ 47.99 USD
Only available at this price
Free Shipping
The blower motor resistor controls the speed of the blower motor - a failed unit can leave you without heat or air conditioning when you really need it.

Meyle - Corporate Logo
T#:579337
Part#: 3140420008
Ships on Jan 11, 2027
$ 41.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 41.99 USD
Only available at this price
Free Shipping on orders $49 and up
Recommend inspection at every rear brake service
Adapter Set For Transmission Fluid Pump
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:29101662
Part#: 9999901001
Back Ordered
$ 91.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 91.99 USD
Only available at this price
Free Shipping on orders $49 and up
  • The Meyle Adapter Set for the Transmission Fluid Filler Pump is designed for a wide range of Euro and domestic vehicles. This set allows you to maximize the utility of Meyle's premium-built pump across various makes in your driveway. Each adapter easily attaches to the filler's coupler, ensuring quick and seamless transitions between adapters. The set comes in a blow-molded case, providing convenient and mess-free storage.


    Please note: The Meyle transmission filler tool is sold separately. The filler tool part number is T29068522.


    Includes:

    • BMW, Volvo Adapter (5/16" -24 UNF)
    • VW, Audi, Porsche Adapter (M10 x 1.00)
    • VW Adapter (Alternate)
    • VW, BMW Adapter (Alternate)
    • Nissan, Honda, BMW Adapter (Alternate)
    • Audi, VW, Seat, Skoda Adapter (M24 x 1.50)
    • Audi Adapter (M22 x 1.50)
    • Mercedes-Benz Adapter (M12 x 1.50)
    • Toyota, Lexus Adapter (M18 x 1.50)
    • Ford, Mazda Adapter (1/8" NPT)

  • WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

  • Show More Show Less

    APEX Wheels - Corporate Logo
    T#:599071
    Part#: EC71995ET28RSKT
    Ships in 6 Business Days
    $ 1,876.00 USD
    Only available at this price
    $ 1,876.00 USD
    Only available at this price
    Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45
    BMC - Corporate Logo
    T#:398703
    Part#: FB608/20
    Back Ordered
    $ 89.99 USD
    Only available at this price
    Free Shipping
    $ 89.99 USD
    Only available at this price
    Free Shipping
    Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
    Show More Show Less

    Meyle - Corporate Logo
    T#:384419
    Part#: 32411097164
    In Stock
    $ 20.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 20.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Replaces your cracked and leaking reservoir

    BMW Caliper Bushing Kit - Stock Replacement - MEYLE
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579350
    Part#: 34111157038
    In Stock
    $ 9.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 9.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Guide bushings on your caliper keep road dirt, water, salt, and other grime out of your caliper guides. If the bushings wear out they are unprotected and can fail prematurely. Let your caliper slide smoothly, quietly, and freely with these bushings.
    Show More Show Less
    Meyle Expansion Tank Cap
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579357
    Part#: 3148009004
    In Stock
    Sale - Save 40% $ 14.99

    This product was last offered at the strikethrough price on
    05-15-2026

    $ 8.99 USD
    Only 0 available at this price
    Free Shipping on orders $49 and up
    Sale - Save 40%
    $ 14.99

    This product was last offered at the strikethrough price on
    05-15-2026

    $ 8.99 USD
    Only 0 available at this price
    Free Shipping on orders $49 and up
    Replace worn or missing pieces.
    Front Wheel Hub - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:37217384
    Part#: 31203413226
    In Stock
    $ 66.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 46.99 USD
    Only 1 available at this price
    Limited Qty Sale
    Free Shipping on orders $49 and up
    $ 66.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 46.99 USD
    Only 1 available at this price
    Limited Qty Sale
    Free Shipping on orders $49 and up


    Meyle Windshield Washer Pump
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:361065
    Part#: 67128362154
    In Stock
    $ 13.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 13.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Located in the washer reservoir
    APEX Wheels - Corporate Logo
    T#:639899
    Part#: HW-APX-CAP-BLK
    Ships in 10 Business Days
    $ 9.99 USD
    Only available at this price
    Free Shipping
    $ 9.99 USD
    Only available at this price
    Free Shipping
    Meyle Hydraulic filter kit, A/T
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944126
    Part#: 24117593565
    Ships in 1 Business Day
    $ 84.99

    This product was last offered at the strikethrough price on
    05-08-2026

    $ 82.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 82.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Includes O-ring and transmission pan gasket Keeping your automatic transmission fluid clean is imperative to keeping your transmission shifting properly. If the filter gets clogged, the hydraulic pressure in your transmission can drop dangerously low. Replace yours to keep your transmission working properly. When replacing the filter, you should also replace the transmission pan gasket to keep everything sealed properly. Also, order some new fluid to rejuvenate your transmission and guarantee years of quality performance. Using inferior, aftermarket fluid can actually shorten the life of your transmission. Always use factory approved fluid. Check your owner's manual for the proper intervals at which your transmission fluid should be changed. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
    Show More Show Less

    APEX Wheels - Corporate Logo
    T#:201364
    Part#: EC71995ET22AN
    Back Ordered
    $ 459.00 USD
    Only available at this price
    $ 459.00 USD
    Only available at this price
    19x10" ET25 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x9.5"
    Offset (mm):22
    Weight (lbs):22.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    APEX Wheels - Corporate Logo
    T#:201376
    Part#: EC719105ET22AN
    Ships in 6 Business Days
    $ 479.00 USD
    Only available at this price
    $ 479.00 USD
    Only available at this price
    19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x10.5"
    Offset (mm):22
    Weight (lbs):23.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    APEX Wheels - Corporate Logo
    T#:593646
    Part#: HW-OEM-VALVE-SV
    Ships in 3 Business Days
    $ 17.00 USD
    Only available at this price
    Free Shipping
    $ 17.00 USD
    Only available at this price
    Free Shipping
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less

    APEX Wheels - Corporate Logo
    T#:201374
    Part#: EC719105ET22SMBK
    Ships in 6 Business Days
    $ 479.00 USD
    Only available at this price
    Free Shipping
    $ 479.00 USD
    Only available at this price
    Free Shipping
    19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x10.5"
    Offset (mm):22
    Weight (lbs):23.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    Automatic Transmission Oil Pan Gasket
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36032367
    Part#: 24117524707
    Ships in 1 Business Day
    $ 44.99

    This product was last offered at the strikethrough price on
    05-08-2026

    $ 43.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 43.99 USD
    Only available at this price
    Free Shipping on orders $49 and up

    APEX Wheels - Corporate Logo
    T#:201383
    Part#: ARC81995ET33SMBK
    Ships in 6 Business Days
    $ 449.00 USD
    Only available at this price
    $ 449.00 USD
    Only available at this price
    19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x9.5"
    Offset (mm):33
    Weight (lbs):20.5
    Profile:Concave

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    APEX Wheels - Corporate Logo
    T#:201371
    Part#: EC71910ET25SMBK
    Ships in 6 Business Days
    $ 469.00 USD
    Only available at this price
    Free Shipping
    $ 469.00 USD
    Only available at this price
    Free Shipping
    19x10" ET25 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x10"
    Offset (mm):25
    Weight (lbs):23.5
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    APEX Wheels - Corporate Logo
    T#:593645
    Part#: HW-OEM-VALVE-GM
    Ships in 3 Business Days
    $ 15.00 USD
    Only available at this price
    Free Shipping
    $ 15.00 USD
    Only available at this price
    Free Shipping
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less
    APEX Wheels - Corporate Logo
    T#:593644
    Part#: HW-OEM-VALVE-BK
    Ships in 3 Business Days
    $ 15.00 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 15.00 USD
    Only available at this price
    Free Shipping on orders $49 and up
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less


    APEX Wheels - Corporate Logo
    T#:201357
    Part#: EC71995ET43RS
    Ships in 6 Business Days
    $ 426.00 USD
    Only available at this price
    Free Shipping
    $ 426.00 USD
    Only available at this price
    Free Shipping
    19x9.5" ET43 APEX EC-7 Wheel 23lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x9.5"
    Offset (mm):43
    Weight (lbs):23
    Profile:2, moderate dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    Front Differential Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36032352
    Part#: 33176770788
    Special Order: No Guaranteed ETA
    $ 15.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 15.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    The subframe serves as the mounting point for your rear suspension, connecting to the vehicle's body with bushings designed to absorb vibrations. These bushings minimize vibrations transmitted to the cabin while maintaining a secure and stable connection, ensuring tight and reliable suspension performance.
    Show More Show Less
    Trailing Arm Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594607
    Part#: 33326771828
    Ships on Jan 11, 2027
    $ 14.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 14.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Bushing located in the rear lower position of the rear trailing arm. Priced Each. Used for both driver and passenger sides.

    Meyle Rear Shock Absorber - E83 X3 (w/o sport suspension)
    For vehicles without sports suspension settings
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579433
    Part#: 33503451402
    Special Order: No Guaranteed ETA
    $ 85.99 USD
    Only available at this price
    Free Shipping
    $ 85.99 USD
    Only available at this price
    Free Shipping
    Meyle shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This rear shock absorber is a direct replacement for the factory rear suspension.
    Show More Show Less

    Hood Prop Strut - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594542
    Part#: 51233400352
    Special Order: No Guaranteed ETA
    $ 23.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 23.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Have trouble keeping the hood open, using sticks and broom handles? Here are replacement struts to cure those issues.
    Rear Subframe Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594566
    Part#: 33316770781
    Special Order: No Guaranteed ETA
    $ 16.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 16.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    If there is excessive vibration in your cabin or a clunk or knock when going over bumps, the problems may be your subframe bushings. By replacing them with new units, everything will stay tighter and provide a more secure mounting location for your lower control arms, engine, and transmission.
    Show More Show Less

    Auxillary Fan Switch
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:4934936
    Part#: 3148210000
    Special Order: No Guaranteed ETA
    $ 18.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 18.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    The auxiliary fan switch activates the auxiliary cooling fan to provide additional cooling under high heat loads, and when the car is stationary. Also known as the coolant temperature sending unit, comes with related o-ring
    Show More Show Less
    Meyle Oxygen Sensor - Pre-Cat Bank 2 - E9X E60 E82 N52
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944212
    Part#: 11787558073
    Special Order: No Guaranteed ETA
    $ 123.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 123.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high-quality Meyle sensor to turn off your check engine light and restore fuel mileage. This is a Meyle oxygen sensor for BMWs with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Replacement for BMW # 11787558073 and 11787537984. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
    Show More Show Less

    Meyle PD Brake Disc - 325x25
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944145
    Part#: 34113400151
    Special Order: No Guaranteed ETA
    $ 87.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 87.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    325x25 High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
    Show More Show Less

    Control Arm Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36032310
    Part#: 33326770824
    Special Order: No Guaranteed ETA
    $ 10.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 10.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Failing control arm bushings can cause noticeable issues in your vehicle. Symptoms include increased suspension noise, steering wheel vibration when encountering road hazards, and a general looseness in handling. Additionally, misalignment caused by worn bushings can lead to premature tire wear. Replacing the control arm bushings will restore a tighter, more stable suspension and improve overall driving dynamics.
    Show More Show Less
    Meyle - Corporate Logo
    T#:40342880
    Part#: 66206989069
    Special Order: No Guaranteed ETA
    $ 46.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 46.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Is your BMW’s parking assist system constantly beeping? This is often caused by a faulty bumper-mounted sensor. Finished in satin black, these sensors are designed to function without being painted, ensuring optimal performance.
    Show More Show Less
    Inner E53 Tie Rod Assembly
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36269430
    Part#: 3160303044
    Special Order: No Guaranteed ETA
    $ 28.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 28.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Tie rods are essential for transmitting steering wheel movements to the wheels, ensuring accurate control and alignment. As vehicles age and accumulate mileage, tie rod ends can wear out, leading to reduced steering responsiveness, increased vibrations, and uneven tire wear. A failing tie rod end poses a significant safety risk, as it is critical for maintaining the wheel's proper alignment. Replacing worn tie rods is an affordable way to prevent dangerous failures. New tie rod ends deliver noticeable improvements over aging components, offering tighter, quieter steering and enhanced responsiveness, ensuring a safer and smoother driving experience.
    Show More Show Less


    Fluid Level Sensor
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5973204
    Part#: 17117546548
    Special Order: No Guaranteed ETA
    $ 13.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 13.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    MEYLE-ORIGINAL: True to OE fluid level sensor. Used in multiple locations. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Comparable OE Cross Reference - 17117546548
    Show More Show Less
    Outer Tie Rod End
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594604
    Part#: 32303418202
    Special Order: No Guaranteed ETA
    $ 36.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    $ 36.99 USD
    Only available at this price
    Free Shipping on orders $49 and up
    Tie rod ends should be checked as part of a periodic steering and suspension inspection, and replaced for looseness, binding, or torn rubber boots.