The factory dual-mass flywheel in W11-powered MINI Coopers was designed with comfort in mind—minimizing drivetrain vibration and delivering smoother shifts. However, this focus on refinement comes at a performance cost. The hefty 27 lbs. of rotational mass dulls throttle response, slows acceleration, and makes rev-matching more difficult. Dual-mass flywheels are also known to be less reliable in tuned or modified setups and can be expensive to replace when they fail.

ECS Tuning developed their Lightweight Single-Mass Flywheel to address these issues with a performance-focused alternative. Weighing in at just 17 lbs., this flywheel sheds nearly 10 lbs. of rotating mass compared to the OEM unit—transforming throttle response, acceleration, and clutch feel for a more engaging and dynamic driving experience.

Key Features:

Manufactured from 4140 Chromoly Steel
Heat-treated and tempered for exceptional strength, wear resistance, and thermal stability.
Optimized Hardness (HRC 28–32)
Ensures consistent performance and durability under extreme conditions.
Precision-Balanced to G16 Standard (175 g-mm)
Exceeds OEM balance requirements for smooth, high-RPM operation.
Black Oxide Finish
Provides effective corrosion resistance and a sleek appearance.
SFI 1.1 Certified
Validated for safe use in high-performance and racing environments.
Direct Fit
Engineered to work seamlessly with OE-style clutch kits designed for the W11 engine architecture.
Performance Benefits:

OEM Flywheel Weight: 27 lbs
ECS Lightweight Flywheel Weight: 17 lbs
This significant weight reduction results in:

Sharper throttle response
Faster engine revs and acceleration
Improved clutch engagement and feel
Increased performance potential for modified vehicles
OEM & Aftermarket Compatibility:

Replaces OE Flywheel #: 21207532057
Compatible Clutch Kits:
MINI OE: 21207551384
Spec: SB001, SB003
Clutch Masters: 03050HD00R
Recommended Hardware:

Flywheel Bolts: 11227560579 (Qty 8)
Pressure Plate Bolts: 21207520449 (Qty 6)

Schwaben offers the right tools to make your next project a success. Everything from complex engine scanners to brake bleeders and spring compressors, Schwaben tools has you covered.

Some of the recommended use include but are not limited to:

• Remove and install rear ball joints on E38, E39, E60/61, E63/64, E65/66, and E70's
• Removal and installation of ball joints and bushings on rear control arms on E36, E46, E39, E60/61, E63/64,  E65/66, E70, E83 and E85/86 Z4's
• Removal and installation of rear sub frame mounted differential bushings on E36, E46, E83 and E85/86 Z4's
• Removal and installation of rear differential mounted bushings on E36, E46, E9X, E60/61, E63/64, E65/66, and E85/86 Z4's

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

78mm Diameter with fitment for M12 nuts/bolts.

Applicatons: 
1992-1998 E36 BMW 318i 318is 318ti 318ic - Manual Transmission 
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic - Manual and Automatic Transmission 
1992-1998 E36 BMW 328i 328is 328ic - Automatic Transmission 
1999-2005 E46 BMW 323i 323ci 325i 325ci - Manual Transmission 
1997-2002 Z3 BMW Z3 1.9 - Manual Transmission 
1999-2000 Z3 BMW Z3 2.3 M52TU - Manual and Automatic Transmission 
2001-2002 Z3 BMW Z3 2.5i - Manual Transmission 
1997-4/1999 Z3 BMW Z3 2.8 - Automatic Transmission 
2003-2006 Z4 BMW Z4 2.5i - Manual and Automatic Transmission 

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Elevate your vehicle's clutch performance with the all-inclusive Performance Clutch Installation Kit, tailor-made for stage one clutch upgrades. This kit includes a robust steel flywheel for enhanced durability.

FX250 (Stage 2) Features:

• High-performance street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage™ pressure ring design
• Sprung hub/cushioned disc
• Steel-backed Organic/Fiber Tough disc

Experience the Clutch Masters difference with our clutch kits, which include all the essential components:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing (when applicable)
• Pilot Bearing or Bushing (when applicable)
• Alignment Tool

When it comes to gaining a significant advantage over your competitors, the MFactory Helical Limited Slip Differential (LSD) is your ultimate ally. This LSD offers a seamless and consistent distribution of power to your vehicle's wheels, allowing you to harness maximum traction and put the power firmly on the ground.

But what does an LSD do, you ask? Well, without an LSD, your car essentially operates as a "1-wheel drive," as it can't deliver torque to both wheels simultaneously. Instead, it directs torque to the wheel with less grip, highlighting the limitations of an open differential, which is standard in most vehicles.

An LSD, on the other hand, permits the wheels to spin at slightly different speeds by a limited amount, typically represented as a percentage difference. It's when the differential locks that both wheels receive power. It's important to note that LSDs function differently from locked differentials, such as those in off-road trucks, which supply equal torque and rotational speed to both rear wheels simultaneously, often causing handling issues.

Key Features:

• Crafted from imported Japanese SAE 4320 Steel
• Industry-first 30-day "Feel the Torque™" money-back guarantee, along with a Limited-Lifetime Warranty
• Forged, double tempered, and super sub-zero treated for unparalleled toughness
• Utilizes advanced Shot Peening technology to increase surface hardness
• Engineered to withstand the extreme shock loads of competition-level drag racing
• Advanced gear geometry designed using industry-leading software, delivering more power to the ground
• Exclusively uses the highest quality Brighton-Best Hardware
• Maintenance-free gears eliminate the need for special fluids and rebuilds associated with plate-type LSDs
• Ensures lock-free operation, preventing adverse effects on steering response
• Rated for up to ~1000 WHp

As part of the break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.

Warranty:

MFactory Competition Products stands behind the quality of its Helical LSDs. A limited lifetime warranty is provided, ensuring that these LSDs are free of defects in materials and workmanship upon receipt of the product and professional installation. Any part returned must be determined by MFactory Competition Products to be defective before any warranty credit or replacement is issued.

MFactory Competition Products's obligation under the warranty is limited to repairing or replacing, at its discretion, any part proven defective. The customer is responsible for prepaying transportation charges.

It's important to note that the final determination of the suitability of the products for the intended use is the sole responsibility of the buyer. MFactory Competition Products shall not be liable for any special, direct, indirect, incidental, or consequential damages, including claims for delay, loss of profits, or labor that might be claimed as a result of the failure of any part.

Furthermore, MFactory Competition Products shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part covered by this warranty.

Please be aware that there are no other warranties, whether expressed or implied, extending beyond those set forth above.

Note: To ensure a proper fit, you'll need to reuse the old bearings or acquire new bearings and press them onto each end.

Ensure the smooth operation of your automatic transmission with a high-quality torque converter designed for your Mini. The torque converter plays a crucial role in transferring power from the engine to the transmission, ensuring optimal performance. If you experience issues like erratic shifting, fluid leaks, or loss of vehicle movement, it's likely time for a replacement torque converter.

• Essential component for transferring power in automatic transmissions
• Helps maintain smooth shifting and transmission performance
• Addresses issues like erratic shifting behavior and fluid leaks
• Ensures the vehicle remains operational and safe for driving

MINI R53 R56 Front Wheel Bearing Kit is an essential upgrade for maintaining smooth, quiet operation in your MINI's front wheels. Designed to eliminate front wheel bearing noise and restore optimal performance, this complete kit includes everything needed for a reliable replacement. The bearings mount securely to the carrier, with axle nuts to lock the axle in place for a durable, high-performance fit.

• Reduces bearing noise from the front wheels, improving ride quality and quietness
• Complete kit includes two front wheel hub bearings, mounting bolts, and axle nuts
• Restores smooth wheel rotation and ensures reliable performance
• Direct fit for MINI R53 and R56 models, making installation straightforward
• Ideal for replacing bearings in pairs for consistent handling and wear

Ensure your MINI R53 or R56 drives smoothly and quietly with this comprehensive front wheel bearing kit, designed for durability and dependable performance.

Ensure efficient transmission cooling with this round oil cooler designed for mounting on top of the automatic transmission housing in BMW models. It forms a vital part of the transmission fluid cooling system, effectively cooling the transmission oil. Ideal for resolving coolant leaks associated with automatic transmissions.

Benefits:

• Efficient cooling for transmission fluid
• Resolves coolant leaks in automatic transmissions
• Compatible with GA6F21WA auto transmission