MINI N14 Vacuum Pump

Upgrade your MINI's vacuum system with the MINI N14 Vacuum Pump. This essential component mounts to the side of the cylinder head block, ensuring proper vacuum to the master cylinder and boost levels.

Benefits:

• Improves vacuum system performance
• Ensures proper vacuum to the master cylinder and boost levels
• Includes sealing o-ring for easy installation
• OE Supplier for reliable quality

Upgrade your MINI's vacuum system with the MINI N14 Vacuum Pump for optimal performance.

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

M7 MINI Cooper S Cold Air Intake

Upgrade your MINI Cooper S with the M7 Cold Air Intake, a high-performance solution designed for enhanced engine efficiency and power. This innovative intake system features a fully enclosed custom metal housing that seals a dual-stage high-flow foam filter, offering superior filtration and heat resistance. With a focus on delivering optimal airflow, the M7 Cold Air Intake significantly improves your MINI's performance. Its pressurized, cold air supply from the cowl area beneath the windshield enhances power without the need for any factory parts modifications. Installation is quick and hassle-free, allowing you to enjoy the ride in no time.

Key Features:

• Fully enclosed custom metal housing
• Dual-stage high-flow foam filter
• Over-sized filter for ample filtering capacity
• Velocity stack for improved air flow
• Pressurized cold air supply from the cowl area
• Simple, non-destructive installation
• Matte black powder-coated intake box
• Includes pre-oiled filter and installation hardware
• Proudly made in the USA
• Now 50 State Legal in the USA

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

Enhance your BMW's performance with the high-quality K&N air filter. Offering high air flow and exceptional filtration, this filter is designed to increase horsepower and acceleration. Its washable and reusable design ensures long-lasting performance, lasting up to 50,000 miles before cleaning is required, depending on driving conditions. Don't forget to grab a K&N recharge kit for easy cleanings in the future.

• High air flow for improved engine performance
• Exceptional filtration to protect your engine
• Washable and reusable design for long-lasting use
• Lasts up to 50,000 miles before cleaning is needed

GFB Expands DV+ Range for European Vehicles

GFB is proud to introduce an extended DV+ range, offering a direct-fit solution for the factory diverter valve used in a wide range of European vehicles. This innovative product is engineered to enhance both performance and reliability.

Key Features:

• Utilizes the factory solenoid coil for seamless integration
• Replaces weak plastic valve components with robust metal parts, ensuring durability and strength, even on chipped engines
• Direct-fit replacement with GFB's TMS benefits, simplifying installation
• Features an exclusive "pilot-actuated" valve mechanism for rapid response during high boost conditions

Specifically designed for the N14 MINI Cooper S/ JCW Engine, GFB's DV+ is the ideal solution to optimize your vehicle's diverter valve.

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Enhance Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This design eliminates any disruption to the PCV electrical connection, preventing the risk of triggering a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part is only compatible with MINIs equipped with the N18 R60 R61 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed announces the release of its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

Unique Benefits:

• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.

Specifications:

• Inner Diameter at MAF Sensor: 2.75” [70mm]
• Inner Diameter at Turbo Inlet: 1.97” [50mm]

Easy DIY installation.

Additional Features:

• Made from 100% silicone materials resistant to oil and most chemical damage.
• Designed for high temperature (300°F

ALTA Cold Air Intake System, specially designed for the R53 6-speed manual. Crafted from laser-cut aluminum sheet metal and precision CNC bent, this intake system ensures perfection in form and function. Finished with a durable black texture powder coating, it not only offers long-term protection but also delivers an OEM appearance.

The airbox of the ALTA Cold Air Intake seals to the underside of the hood, effectively preventing under-hood heat from infiltrating the intake airstream. This enhancement ensures cooler, denser air intake, resulting in improved engine performance. With the ALTA intake system, your BMW will produce a distinct throaty, deep tone on throttle, accentuating its modified nature. Additionally, it amplifies the sound of your supercharger, whether stock or aftermarket.

Featuring a high-flow foam filter, this intake system significantly reduces intake restriction while expanding the surface area for the engine to intake clean air. Unlike cotton or gauze-type filters, the foam-based filter facilitates multi-layer filtration, effectively trapping dirt at various levels. This superior filtration capability results in improved particulate restriction without compromising horsepower, even as the filter accumulates dirt.

Benefits:

• Precision-crafted aluminum construction for durability
• Under-hood heat prevention for cooler, denser air intake
• Enhanced engine performance and modified engine tone
• High-flow foam filter for reduced intake restriction
• Multi-layer filtration without compromising horsepower

Upgrade your Mini's air filtration system with the CTS Air Filter, specifically designed for N14 and N18 engines in Mini models R55, R56, R57, R58, and R59. This high-quality air filter ensures optimal airflow and filtration efficiency, providing superior engine performance and longevity. Engineered to meet the demands of Mini enthusiasts, the CTS Air Filter offers the following benefits:

• Enhanced airflow for improved engine performance
• Superior filtration to protect against contaminants
• Designed specifically for N14 and N18 engines in Mini models R55, R56, R57, R58, and R59
• Ensures longevity and reliability of Mini's engine
• Easy installation for hassle-free maintenance

Enhance your Mini's performance with this brand new replacement air filter element designed for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and the R56 AGS-R Ram Air System. Pre-oiled for convenience, it comes with a new clamp, making installation a breeze. Improve airflow and maintain optimal engine efficiency with this high-quality air filter element.

• Direct replacement for M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and R56 AGS-R Ram Air System
• Pre-oiled for immediate use
• Includes new clamp for hassle-free installation
• Enhances airflow for improved engine performance
• Maintains optimal engine efficiency

Introducing the M7 Speed MAXX-FLO (TM) fresh air system, the ultimate upgrade for Generation 2 MINI vehicles. Designed to fit R55 through R59 MINIs with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman, this system offers remarkable improvements. Say goodbye to the restrictive stock air box and embrace a precision-fabricated aluminum frame that seamlessly connects to factory mounting points for a hassle-free installation.

The M7 Speed MAXX-FLO (TM) fresh air system stands out with a range of exceptional features:

• Sturdy heavy gauge aluminum construction, TIG welded for durability.
• Matte black super durable powder coat finish with a laser-cut stainless steel M7 medallion.
• 12" long x 5 " diameter dual-stage super high flow/low restriction washable foam filter for maximum airflow.
• Optional 8" long x 6" diameter pleated washable filter available.
• A 100% silicone connection elbow perfectly fitting the factory MAF housing, offered in three color choices: BLACK | BLUE | RED.
• MAF sensor stays in the stock location with no modifications needed.
• Air filter element securely mounts to a sturdy metal adapter tube, ensuring protection for the delicate MAF sensor housing.
• Consider adding the M7 R56 Vortex 2 Scoop for enhanced style and increased air volume (sold separately).
• Combat heat with the recommended addition of the turbo heat shield (sold separately).
• Easy installation for a hassle-free upgrade.
• Proudly 100% Made in The USA.

Technical Notes:

• For vehicles without a MAF Sensor (most early non-USA models), an optional MAF Spacer|Adapter is required for proper connection to stock components.
• If using a stock scoop, removal of the factory blocking plate is recommended.
• This product has received C.A.R.B. approval.