Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Factory rubber brake hoses expand under pressure, requiring increased fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under pressure. This expansion is even more prominent in aged and weathered rubber hoses. Turner Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

When you buy brake lines, you want them to last for years to come. Conventional SS lines will corrode the first time they are exposed to water. Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake line also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

All Turner brake lines are engineered to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are manufactured on dedicated, DOT-compliant brake equipment and each is tested to 3000 psi before being

shipped.

Turner Motorsport stocks a huge inventory of premium brake components, including pads, rotors, shoes, drums, hoses, hard lines, fluids, hardware, hi-temp lubricants, all the way up to complete brake rebuild kits. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport!

Technical features:

Fully compliant with DOT Standards (MVSS-1006)

Lines burst-tested to 3000psi
(maximum tested pressure from a BMW braking system is 1200psi)

Zinc-Nickel coating for maximum corrosion resistance

Low profile connectors for clean and recessed look

Factory rubber brake hoses expand under pressure, requiring increased fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under pressure. This expansion is even more prominent in aged and weathered rubber hoses. Turner Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

When you buy brake lines, you want them to last for years to come. Conventional SS lines will corrode the first time they are exposed to water. Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake line also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

All Turner brake lines are engineered to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are manufactured on dedicated, DOT-compliant brake equipment and each is tested to 3000 psi before being

shipped.

Turner Motorsport stocks a huge inventory of premium brake components, including pads, rotors, shoes, drums, hoses, hard lines, fluids, hardware, hi-temp lubricants, all the way up to complete brake rebuild kits. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport!

Technical features:

Fully compliant with DOT Standards (MVSS-1006)

Lines burst-tested to 3000psi
(maximum tested pressure from a BMW braking system is 1200psi)

Zinc-Nickel coating for maximum corrosion resistance

Low profile connectors for clean and recessed look

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.