Turner Motorsport for BMW 3 Series G20 (2019+)

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Let’s be honest—what’s the point of owning a B58-powered BMW if you can’t hear it? The factory M340i and M440i rear muffler assembly is oversized, heavy, and overly restrictive, muting the deep, aggressive tone the B58 engine was designed to produce. Our Muffler Delete System is the perfect solution for enthusiasts looking to unleash that signature turbocharged inline-six sound without the cost of a full cat-back system.

Engineered and manufactured in-house, this system replaces the factory rear muffler with a free-flowing, TIG-welded 304 stainless steel setup designed to enhance tone, reduce weight, and maintain OE-level fitment and quality. At the front, 3" primary tubing mates seamlessly to your factory midpipe using a durable stainless steel sleeve clamp. At the rear axle, the primary tubing transitions to dual 2.5" adjustable tailpipe sections for a clean, yet aggressive look. These tailpipe sections merge to quad outlets, designed for compatibility with our selection of 3.5" exhaust tips, allowing you to tailor the system's appearance to your liking. Accuseal-style, slip-fit joints allow for easy adjustment, ensuring perfect tip placement inside the factory rear diffuser. The result? A more engaging exhaust note and a clean, motorsport-inspired appearance that transforms your BMW’s personality both visually and acoustically.

Features & Benefits

TIG-welded 3" primary tubing transitions to dual 2.5" adjustable tip sections for a bold, refined look Accuseal slip-fit joints offer full adjustability for precise alignment and perfect tip placement Direct-fit design connects to the factory exhaust at OE cut points using the original sleeve clamps Quad 2.5" tip outlets compatible with Turner tip options in Brushed Aluminum, Black Chrome, or Mirror Chrome Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Kit Contents:

Mid-Pipes (Left & Right) Crossover Pipes (Left & Right) Tail-Pipes (Left & Right) Logo Bracket & Hardware (2) Accuseal-Style Exhaust Clamps (2) Sleeve Exhaust Clamps (4) Turner Motorsport 3.5" Tips – Choose Your Finish! Product Development

Our G2X M340/M440 Muffler Delete Kit was designed, engineered, tested, and quality-inspected in-house to ensure the highest level of precision and quality through leading-edge product development technology.

Protect your BMW’s vulnerable underbody components from costly damage with our new Aluminum Skid Plate Kit, an exclusive design for BMW G2X M340i/M440i xDrive.

From the factory, BMW G2X cars are equipped with a weak plastic undertray. This flexible piece can't withstand the rigors of daily driving, leaving critical parts like the engine oil pan and core support exposed to damage from potholes, speed bumps, and road debris. Upgrade your underbody protection with our durable aluminum skid plate, engineered for superior performance, lasting durability, and improved airflow.

Features & Benefits:

Made from lightweight yet robust 8GA (3.3mm) 5052 aluminum, providing unparalleled underbody protection without adding excessive weight over the front axle. Features a durable one-piece design that ensures strength and resilience against impacts while also replacing the flimsy OEM undertray. High-quality milled aluminum finish for a seamless look that integrates perfectly with your BMW’s underbody components. Optimizes performance by maintaining factory aerodynamics while improving ground clearance and airflow. Includes all necessary mounting hardware for a straightforward installation. Made in the USA! Product Development: In the development stages of this project, our R&D team employed state-of-the-art tools, including FARO laser scanning, SolidWorks 3D CAD modeling, and extensive long-term testing, to create a skid plate that delivers exceptional protection and reliability. This skid plate isn't just an upgrade—it’s a statement of quality and innovation.

Installation: To ensure seamless installation, we've provided an easy-to-follow, step-by-step installation guide.

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Set of 4 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.