BMW Wheels - Genuine & Performance for BMW 3 Series G20 (2019+)

• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:
2017+ G30 BMW 530i, 530e, 540i, M550i
2016+ G11 BMW 740i xDrive, 750i xDrive, 740e
2014+ I01 BMW  i3 60ah 94ah Rx
2014+ I12 BMW i8 Coupe

Turner Motorsport brings you H&R Wheel Spacers, unlocking numerous benefits for a comprehensive vehicle upgrade. Whether enhancing aesthetics or improving performance, these spacers provide versatility for BMW owners seeking a distinct look and enhanced handling. Crafted from a proprietary aluminum/magnesium alloy, H&R spacers are not only exceptionally strong but also impressively lightweight, contributing to a superior driving experience. Hub centric for precision, these German-made wheel spacers adhere to ISO 9001 Quality Assurance standards and meet strict safety criteria set by the German TUV.

• Versatile Upgrade: Enhances vehicle performance and aesthetics.
• Compatibility: Allows for larger brake and aftermarket suspension systems without wheel interference.
• Aesthetic Appeal: Achieve the desired tuck, poke, or flush look for your BMW.
• Improved Handling: Enhances grip in corners for a better driving experience.
• Lightweight Construction: Up to 70% lighter than comparable steel products.
• Hub Centric Design: Ensures the highest level of accuracy.
• German-Made Quality: Crafted under ISO 9001 standards and German TUV safety criteria.

Upgrade your BMW's performance and aesthetics with Turner Motorsport H&R Wheel Spacers.

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

• This specially made socket features 17mm male hex on one end and 17mm socket on the other
• Works to extend reach between wrench and lug nut
• Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point long reach deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.

Features:

• Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
• Folds flat against the wall when not in use to maximize your usable space
• Supports up to 250 lbs and weighing in at only 20 lbs itself
  
• 46" wide storage area (holds up to four 11½" wide tires)
• Sturdy steel construction
• Mounting holes spaced 48" apart for mounting to standard center studs

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

• 17mm, 19mm and 21mm Sockets included in a blow molded case.
• All sockets are 1/2" drive
• 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

The Schwaben Adjustable Wheel Dolly Jack is a top-tier solution for automotive enthusiasts and professionals seeking a dependable, heavy-duty tool to effortlessly lift and move vehicles. This versatile dolly features an adjustable base that fits tires up to 34 inches in diameter and 11 inches wide, making it compatible with a wide range of vehicles. Constructed from robust steel, it can support up to 1300 lbs per unit, ensuring it handles even the heaviest vehicles with ease. A tough, powder-coated finish adds an extra layer of protection against rust and wear, increasing the tool’s lifespan in tough environments.

The innovative design of the open-arm base allows users to slide the dolly under a vehicle's tire without the need to raise the car first, saving both time and energy. Equipped with 360-degree heavy-duty casters, this dolly offers superior maneuverability, letting you easily move your car around the shop, garage, or driveway. The ratcheting foot pedal lift system enables hands-free operation, and the rubberized pad ensures a secure grip while lifting. When used as a complete set of four, Schwaben Wheel Dolly Jacks can lift and move up to 5200 lbs in total, ideal for handling large, heavy vehicles.

Whether you're working in a professional garage or tackling a DIY project, the Schwaben Adjustable Wheel Dolly Jack delivers exceptional performance, durability, and ease of use.

Key Features:

Adjustable Base: Fits tires up to 34 inches in diameter and 11 inches wide. Heavy-Duty Construction: Supports up to 1300 lbs per jack, made from durable steel. Long-Lasting Durability: Powder-coated finish resists wear and corrosion, ensuring extended use. User-Friendly Design: Open-arm base makes it easy to position the dolly under a tire without lifting the vehicle. Enhanced Maneuverability: 360° heavy-duty casters for effortless movement across various surfaces. Hands-Free Operation: Ratcheting foot pedal lift with a rubber pad provides a secure grip for easy lifting. High Capacity: A full set of four jacks can support up to 5200 lbs of vehicle weight. Lifetime Replacement: Backed by Schwaben's lifetime replacement program for peace of mind. Specifications:

Max Tire Diameter: 34" (863 mm) Max Tire Width: 11" (280 mm) Max Weight Capacity: 1300 lbs (590 kg) per Dolly Jack Safety Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit www.p65warnings.ca.gov for details on Proposition 65 warnings.

Don’t let a dead battery or flat tire ruin your day. The Schwaben 4-In-1 Jump Pack & Tire Inflator is your all-in-one roadside emergency solution—compact, powerful, and built to keep you moving. Engineered for versatility, this unit combines a high-output lithium-ion jump starter, a digital tire inflator, a bright LED flashlight, and a portable power bank—delivering everything you need in a single, easy-to-carry package.

Whether it’s a weak battery on a cold morning or low tire pressure before a long drive, the Schwaben Jump Pack is ready to go. With 2500 peak amps, it can jump-start most 12V gas or diesel engines up to 6.0L. The integrated 150 PSI air compressor features a digital pressure readout and auto shutoff for precise inflation, while USB-A and USB-C ports let you charge your phone, tablet, or other devices. A 300-lumen LED flashlight with steady, strobe, and SOS modes ensures you’re never left in the dark.

Product Features:

12V Lithium-Ion Power Supply: 2500A peak, 74Wh capacity Digital Air Compressor: 150 PSI max with auto shutoff and pressure readout Power Bank Functionality: USB-A and USB-C compatible, 60W total output 300-Lumen LED Flashlight: Includes strobe and SOS emergency modes Rugged Design: Insulated, keyed battery cables and braided air hose with threaded fitting Kit Includes:

Schwaben 4-In-1 Jump Pack & Tire Inflator Jumper Cables & Clamps Braided Air Hose Nozzle Adapters USB-C to USB-C Charging Cable (for recharging unit) USB-A to USB-C Charging Cable (for devices) Knit Storage Bags User Manual

Introducing the Lokithor JA301 – your go-to all-in-one handheld jump pack and air compressor for tackling roadside issues. Engineered with a patented unique design, this device prioritizes durability and versatile functionality. Its padded handgrip not only ensures a comfortable flashlight-like hold but also makes it suitable for hanging in your garage, campsite, or any location where extra illumination is crucial. The clear and bright interface provides instant insights into the battery charge level and tire pressure as you inflate.

Compact in size, the JA301 is easily storable in your vehicle, ready to rescue you when faced with a flat tire in need of air. With the ability to fill at least one tire and still retain ample battery power for a jump start, it ensures you won't be stranded. Even when stored in your car during extreme temperatures, this reliable tool guarantees consistent performance (see storage temps below). The Lokithor JA301 emerges as the ultimate roadside assistance solution, preventing you from being caught off guard with a dead battery or flat tire. Let this versatile tool tackle significant problems effortlessly.

Features:

• Charging: Charges your phone or other devices with its long battery life.
• Air Inflator: Will inflate your tires without the need to carry around a huge compressor or relying on a tiny digital inflator.
• Jump Starter: Powers up your battery in a pinch.
• Flashlight: Lights up whatever situation you're in: from family gathering to roadside emergency.

Includes:

• Main JA301 Unit
• Jumper Cables
• Air Hose
• Charging Cable
• Accessory Bag
• User Manual

Specifications:

• Battery Capacity: 74Wh
• Starting Voltage: 12V
• Starting Current: 1000A
• Peak Current: 2000A
• Pressure Range: 10-150 psi
• Sensor Accuracy: +/- 2 psi
• Storage Temp: -4°F to 122°F
• Gas Engine Rating: up to 8L
• Diesel Engine Rating: up to 6L