Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
08-12-2026
This product was last offered at the strikethrough price on
08-12-2026
This product was last offered at the strikethrough price on
04-21-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs.
Additional items included in this kit:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-05-2026
This product was last offered at the strikethrough price on
04-21-2026
This product was last offered at the strikethrough price on
04-21-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
Maintain your BMW's cooling system and avoid costly repairs with our comprehensive Water Pump and Thermostat Replacement Kit, meticulously crafted by the experts at Turner Motorsport! Designed to service BMW models with the N62 engine, this kit ensures your vehicle runs at optimal temperature, preventing overheating and extending engine life.
Key Benefits:
All-Inclusive Kit: This package includes everything you need for a complete cooling system overhaul, saving you time and effort sourcing individual components. High-Quality Components: Each part in this kit is manufactured to meet or exceed OEM standards, guaranteeing reliable performance and longevity. Optimal Cooling Performance: Regularly replacing your water pump and thermostat every 60,000 miles is crucial for maintaining peak cooling efficiency. Our kit ensures your BMW's engine stays within the ideal temperature range, preventing overheating and potential engine damage. Enhanced Reliability: By including premium components like the Wahler Thermostat and Graf Water Pump, this kit provides enhanced durability and peace of mind. Kit Contents:
Wahler Thermostat (Part #11537586885): Renowned for its precision and reliability, ensuring your engine maintains the correct operating temperature. Graf Water Pump (Part #11517586779): High-performance pump designed for consistent and efficient coolant circulation. Genuine BMW Hex Bolts (M6x25) (Part #07119905400): Essential hardware for secure installation. Genuine BMW Hex Bolts (M6x40) (Part #07119904525): Ensures all components are firmly in place. Genuine BMW Coolant/Antifreeze (Diluted, 1 Gallon) (Part #82141467704): Formulated specifically for BMW cooling systems, providing optimal protection against corrosion and freezing. Upgrade your BMW N62 cooling system with this expertly curated Water Pump and Thermostat Replacement Kit. Perfect for maintaining the health and efficiency of your engine, this kit is an essential investment for any BMW enthusiast. Order now from Turner Motorsport and ensure your vehicle performs at its best.
This product was last offered at the strikethrough price on
04-21-2026
When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.
Kit includes:
This thermostat fits the following BMWs:
1998-2004 E39 BMW M5
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-07-2026
A well-known issue in BMW models is the water pump, which typically requires servicing every 60,000 miles. To ensure your vehicle's cooling system remains in peak condition, it's also advisable to replace the thermostat during this maintenance. Thankfully, Turner Motorsport has streamlined this process by combining all the necessary parts into one convenient kit.
If you're aiming to maintain and boost your BMW's cooling system, look no further than this premium kit, expertly assembled by the enthusiasts at Turner Motorsport!
This product was last offered at the strikethrough price on
02-27-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
08-12-2026
Maintain your BMW's cooling system and avoid costly repairs with our all-inclusive Water Pump and Thermostat Replacement Kit, expertly crafted by enthusiasts at Turner Motorsport. Designed specifically for your BMW model, this kit ensures proper engine operation at optimal temperatures, preventing overheating and extending engine life.
Key Benefits:
Comprehensive Kit: Simplify your cooling system overhaul with all necessary components in one package. High-Quality Parts: Each component meets or exceeds OEM standards, ensuring reliable performance and longevity. Optimal Cooling Performance: Regular water pump and thermostat replacement every 60,000 miles maintains peak cooling efficiency. Enhanced Reliability: Premium components like the Wahler Thermostat and Graf Water Pump ensure durable, long-lasting performance. Why Choose This Kit:
Maximize Cooling System Performance: Replacing your water pump and thermostat simultaneously ensures your BMW’s cooling system operates efficiently. Protect Your Engine: Properly flushing and refilling your cooling system with Genuine BMW coolant guarantees optimal freeze protection and corrosion resistance. Convenient and Cost-Effective: Combining all essential parts in one kit simplifies maintenance and ensures a thorough, lasting repair. Planning a cooling system overhaul? Opt for this comprehensive thermostat and water pump replacement kit for a lasting repair.
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
07-15-2026
 | Top Turner Tip for a healthy S14! E30 M3s always seem to have cooling problems at the most inconvenient time. If the temp gauge starts rising in the summer months first check and make sure your auxiliary cooling fan is working if it's not it's most likely the switch or the wiring going to the switch. Also remember that the E30 instrument conductor plate can make the gauge read whacky try tapping the gauge if it seems like it's acting up. When it's time to do a water pump (which weeps through a hole on the bottom before it goes completely) take a good look at the radiator too its not expensive and you have to remove it to install the pump anyway. |
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.
Kit includes:
This item fits the following BMWs:
1999-2003 E39 BMW 540i
This product was last offered at the strikethrough price on
06-18-2026
This product was last offered at the strikethrough price on
05-29-2026
This product was last offered at the strikethrough price on
05-29-2026
When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.
Kit includes:
This item fits the following BMWs:
1997-1998 E39 BMW 540i
When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.
Kit includes:
This product was last offered at the strikethrough price on
05-06-2026
The cooling system is one of the major weak points on the N62 engine in the 550i/650i. The water pump itself won't last more than 100,000 miles in most cases and the engine itself is prone to coolant leaks from multiple locations. So a major 550i cooling system overhaul should be planned before the 100,000 mile mark. Aside from obvious leaks the 550i water pump will also squeal or screech indicating the bearings inside have worn. This package covers the water pump, thermostat, and radiator for the 2006-2010 E60 550i and E63 650i with a manual transmission.
The entire cooling system on the 550i is susceptible to leaks and poor performance. The condition of the rest of the cooling system should be considered along with the water pump and thermostat. Replacing the water pump will expose the front of the V8 engine where more problem areas may appear so plan accordingly. The biggest problem is the V8 valley pan gaskets and inner coolant tube seals. The tube carrying coolant through the valley is prone to leaking and replacement is a major job (see our valley pan pipe kit here). Additional items recommended to be replaced during the water pump job are: cooling hoses, expansion tank and cap, temp sensors, drive belts, and pulleys and tensioners.
Base 550i/650i Cooling Package includes:
This product was last offered at the strikethrough price on
07-31-2026
This product was last offered at the strikethrough price on
07-31-2026
This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 2008-2010 E60 528i/528xi models with an automatic transmission (N52 engine).
Much of the later E60 cooling system is strong and reliable compared to the previous generation 5-series models. But there is still the potential for serious cooling system and engine-related failures. On the N52 engine the electric water pump is the weakest link. It will fail without much warning and shut down the engine. Preventative replacement is the best course of action and the water pump and thermostat should be done before they reach 60,000 miles. Several other cooling components are due for replacement by 100,000 miles to prevent other breakdowns. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system.
Our base kit comes with the OEM Behr thermostat, Original BMW electric water pump with mounting screws, and the u-shaped hose between the pump and thermostat. From there you can add additional items to complete the overhaul - radiator, expansion tank, cap, and new radiator hoses..
E60 528i Automatic Radiator Options. There are two styles of radiators for the E60 6-cylinder and automatic transmission: original and updated. You can use either radiator as long as you have the correct corresponding parts to go with it. Both radiators are still available from BMW or the OE supplier Behr. If it were up to us we would prefer the updated style because it won't cause any confusion down the road and it reduces the number of potential leak points by eliminating an unnecessary fitting.
Click here for diagrams of both E60 radiator options.
E60 528i Cooling Hoses. There are a lot of hoses on the N52 engine. Not all of them need to be replaced during an overhaul but it would be a good idea. The hoses themselves don't wear but the metal spring clips on the connector lose their tension over time and that can lead to a leak. It's worse when re-using a hose after it's already been disconnected. Since our package includes the thermostat, water pump, and radiator we offer all of the hoses related to those components. Use the diagram on the right to see where each is connected in the engine bay. Evaluate your current hoses and then decide which ones to replace. One note about the lower radiator hose: when ordering a new hose you must order a new temp sensor. Do not reuse the original temp sensor as it will leak on the new hose.
This item fits the following BMWs:
2008-2010 E60 BMW 528i 528xi with automatic transmission
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E83 with the M54 engine.
A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-15-2026
If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs.
Additional items included in this kit:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This product was last offered at the strikethrough price on
07-16-2026
This product was last offered at the strikethrough price on
06-23-2026
If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs.
Additional items included in this kit:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E39 528i with the M52 engine.
A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts.
This kit fits the following BMWs:
09/1998 - 2000 E39 528i
This product was last offered at the strikethrough price on
07-15-2026
This product was last offered at the strikethrough price on
07-15-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This product was last offered at the strikethrough price on
07-16-2026
This product was last offered at the strikethrough price on
07-16-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This product was last offered at the strikethrough price on
07-16-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
06-16-2026
This product was last offered at the strikethrough price on
06-16-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
02-27-2026
This product was last offered at the strikethrough price on
02-27-2026
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Regular maintenance of your BMW's cooling system is crucial, with the water pump being a known weak point across all models. To ensure optimal performance, it's recommended to service the water pump every 60,000 miles and replace the thermostat simultaneously. Turner Motorsport makes this process seamless with our comprehensive Water Pump & Thermostat Replacement Kit.
Why Choose Our Kit?
Convenience: All essential parts are bundled in one kit. Quality: Components from trusted brands like MAHLE and Graf. Reliability: High-quality parts ensure a perfect fit and long-lasting performance. Value: Save time and money with our complete kit. Kit Contents:
MAHLE Thermostat (Part #: 11518512234) Graf Water Pump Assembly (Part #: 11518516205) Genuine BMW Thermostat Gasket (Part #: 11518516207) Genuine BMW Bolt (Part #: 11518512449) Genuine BMW Bolt (M6x30) (Part #: 07119906123) Genuine BMW Coolant/Antifreeze (Concentrate, 1 Gallon) (Part #: 82141467704) Ready for a Cooling System Overhaul?
Opt for Turner Motorsport's Water Pump & Thermostat Replacement Kit for a hassle-free, effective repair that keeps your BMW running cool and smooth.