Find Parts That Fit Your Vehicle

Performance Clutch Kits

A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.
Sort By:

XClutch - Corporate Logo
T#:17804819
Part#: XKBM20525-2E
Ships in 2 Business Days
$ 2,128.99 USD
Free Shipping
$ 2,128.99 USD
Free Shipping
The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch 8" solid race clutch consists of a performance flywheel, solid-centered ceramic clutch discs, aluminum cover assembly, release bearing & carrier or internal hydraulic release bearing (HRB). XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 7/8" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099841
Part#: SBB58A2STG5KT
Ships in 3 Business Days
$ 1,875.99

This product was last offered at the strikethrough price on
03-04-2026

$ 1,868.99 USD
Free Shipping on orders $49 and up
$ 1,868.99 USD
Free Shipping on orders $49 and up
This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.
Show More Show Less
ACT - Corporate Logo
T#:14221793
Part#: BM17-HDR6
In Stock at Vendor
$ 820.00 USD
Free Shipping on orders $49 and up
BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less

ACT - Corporate Logo
T#:14221779
Part#: BM13-HDG4
In Stock at Vendor
$ 1,599.00 USD
Free Shipping on orders $49 and up
BM13-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28138144
Part#: K70282HDOFEKT
Ships in 1 Business Day
$ 644.99 USD
Free Shipping on orders $49 and up
XClutch - Corporate Logo
T#:26904957
Part#: XKBM23552-1A
Ships in 2 Business Days
$ 1,395.99 USD
Free Shipping
$ 1,395.99 USD
Free Shipping
The XClutch Stage 1 Single Disc Clutch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 10 Disc Material - Organic Disc Type - Sprung Input Shaft Diameter - 1 9/64" Friction Surface Configuration - Raised Flywheel Step - -0.315 Assembly Weight Maximum Torque Capacity - 250 Recommended Use - Street Use Includes Single Mass Flywheel Single Organic Clutch Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28371158
Part#: K03063-HD-DXD-B
Ships in 1 Business Day
$ 1,113.99 USD
$ 1,113.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your 2.5L E85 Z4! Input Shaft Spline Count: 10 Input Shaft Diameter: 29mm Disc Diameter: 9.5" Disc Material: Ceramic Disc Style: 6-Puck Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:377793
Part#: K70010HD
Ships in 1 Business Day
$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your M42 or M44 Powered BMW! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.125" Disc Diameter: 8.5" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less

Packaged by Turner - Corporate Logo
T#:42099840
Part#: SBB58A2STG4KT
Ships in 3 Business Days
$ 1,675.99

This product was last offered at the strikethrough price on
03-04-2026

$ 1,668.99 USD
Free Shipping on orders $49 and up
$ 1,668.99 USD
Free Shipping on orders $49 and up
This Clutch kit is rebuildable, ensuring long-term reliability and performance for BMW owners pushing their vehicles to the limit. For drivers seeking a balance between race-ready performance and street drivability, this Stage 4 clutch kit is the ultimate upgrade.
Show More Show Less

South Bend Clutch - Corporate Logo
T#:401469
Part#: K03070-HD-TZ
Ships in 1 Business Day
$ 1,008.99 USD
Free Shipping
$ 1,008.99 USD
Free Shipping
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your 3.2L E85 or E86 Z4 M Coupe and Roadster! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13" Disc Diameter: 9.44" Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28404571
Part#: K03064-HD-DXD-B
Ships in 1 Business Day
$ 1,072.99 USD
$ 1,072.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your 2.5L E85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13" Disc Diameter: 9.44" Disc Material: Ceramic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E60 E8X E9...
For vehicles with a production date up to 01/2009 with a 8 bolt flange
DKM - Corporate Logo
T#:5987852
Part#: MRX-006-075
Special Order: No Guaranteed ETA
$ 1,799.99 USD
$ 1,799.99 USD
Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less


XClutch - Corporate Logo
T#:26904950
Part#: XKBM20533-2E
Ships in 2 Business Days
$ 1,692.99 USD
Free Shipping
$ 1,692.99 USD
Free Shipping
The XClutch 8" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 22 Disc Material - Ceramic Disc Type - Sprung Solid : Solid Input Shaft Diameter - 1.140625" Flywheel Step - +2.2mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
ACT - Corporate Logo
T#:14221788
Part#: BM13-HDR6
In Stock at Vendor
$ 1,554.00 USD
Free Shipping on orders $49 and up
BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less
XClutch - Corporate Logo
T#:17804818
Part#: XKBM23596-2E
Ships in 10 Business Days
$ 2,239.99 USD
Free Shipping
$ 2,239.99 USD
Free Shipping
The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28337924
Part#: K03060-HD-DXD-B
Ships in 1 Business Day
$ 1,121.99 USD
$ 1,121.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Ceramic Disc Style: 6-Puck Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:377821
Part#: K70288HDOFE
Ships in 1 Business Day
$ 644.99 USD
Free Shipping
$ 644.99 USD
Free Shipping

BMW E46 E39 Z3 Stage 2 Endurance Clutch Kit is designed for drivers who demand both precision and durability in high-performance scenarios. Developed by Turner Motorsport, this endurance clutch kit delivers seamless power transfer and quick shifts, making it ideal for both daily driving and intense racing environments. It features an SFI-approved single mass flywheel, which is highly recommended for optimal performance.

  • Engineered for durability in daily and street use with a focus on rally and endurance racing
  • Rated conservatively to handle up to 385 lbs/ft of torque, providing confidence in high-power applications
  • Precision-balanced pressure plate ensures vibration-free operation even at high RPM
  • Positive disengagement and fast shifts due to altered pressure plate fulcrum, perfect for competitive driving
  • Dual-damped disc design delivers smooth, controlled acceleration through corners, enhancing driving dynamics
  • Hybrid friction material with Feramic (Sintered Iron) on the flywheel side and high-metal organic lining on the pressure plate side offers a positive yet buffered engagement
  • High graphite content in Feramic facings adds to smoothness and longevity
  • Solid-hub center section compatible with OE dual-mass flywheel
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41931273
Part#: SB53A2STG4KT
Ships in 3 Business Days
$ 1,555.99 USD
$ 1,555.99 USD
The SPEC Stage 4 Clutch Kit With Billet Single Mass Flywheel is the ultimate upgrade for BMW enthusiasts demanding race-spec performance and bulletproof strength in the most demanding driving conditions.
Show More Show Less

XClutch - Corporate Logo
T#:26904959
Part#: XKBM23552-1B
In Stock
$ 1,564.99 USD
Free Shipping
$ 1,564.99 USD
Free Shipping
The XClutch Stage 2 Single Disc Clutch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Input Shaft Diameter - 1 9/64" Friction Surface Configuration - Raised Flywheel Step - -0.315 Assembly Weight Maximum Torque Capacity - 380 Recommended Use - Street/Track Use Includes Single Mass Flywheel Single Ceramic Clutch Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28138137
Part#: K70280HDOKT1
Ships in 1 Business Day
$ 618.99 USD
Free Shipping on orders $49 and up

BMW E46 E39 Stage 2 Daily Clutch Kit is designed for high-performance modifications with a focus on durability and strength. This clutch kit features a Heavy Duty Pressure Plate that increases clamp load without significantly raising pedal pressure. The Organic disc material enhances friction coefficient and rotational strength, making it suitable for up to 12,000 RPM. It maintains a stock-like feel while offering enhanced performance and reliability.

  • Ideal for daily driving, street, and moderate racing applications
  • Conservatively rated to hold 385 lbs/ft of torque
  • Features a solid-hub center section compatible with OE dual-mass flywheel

Upgrade your BMW E46 or E39 with the Stage 2 Daily Clutch Kit for improved performance and durability.

Show More Show Less

South Bend Clutch - Corporate Logo
T#:28337808
Part#: K03036-HD-DXD-B
Ships in 1 Business Day
$ 1,428.99 USD
$ 1,428.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your e24 M6 Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13" Disc Diameter: 9.5" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28371153
Part#: K03061-HD-DXD-B
Ships in 1 Business Day
$ 2,724.99 USD
$ 2,724.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your S85-Powered SMG Transmission BMW! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9.5" Disc Material: Ceramic Disc Style: 6-Puck Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
JB Racing - Corporate Logo
T#:3749
Part#: 520-120-228
In Stock
$ 854.00 USD
Free Shipping
$ 854.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 27.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with dual mass flywheel)
Show More Show Less


South Bend Clutch - Corporate Logo
T#:28404576
Part#: K03070HD
Ships in 1 Business Day
$ 753.99 USD
$ 753.99 USD
Upgrade to South Bend Clutch's Stage 1 HD Clutch Kit for your 3.2L E85 or E86 Z4 M Coupe and Roadster! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13" Disc Diameter: 9.44" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337838
Part#: K03042HDTZ
Ships in 1 Business Day
$ 1,331.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your e52 Z8! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9.5” Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337836
Part#: K03042-HD-DXD-B
Ships in 1 Business Day
$ 1,395.99 USD
$ 1,395.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your e52 Z8! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9.5” Disc Material: Ceramic Disc Style: 6-Puck Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28371172
Part#: K03063HDTZ
Ships in 1 Business Day
$ 1,049.99 USD
$ 1,049.99 USD
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your 2.5L E85 Z4! Input Shaft Spline Count: 10 Input Shaft Diameter: 29mm Disc Diameter: 9.5" Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28304420
Part#: K03036HDDXD
Ships in 1 Business Day
$ 1,428.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your e34 M5 Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13" Disc Diameter: 9.5" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28104825
Part#: K03010HD
Ships in 1 Business Day
$ 475.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 1 HD Clutch Kit for your e28 524td! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9” Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less

ACT - Corporate Logo
T#:552735
Part#: BM8-XTR6KT
In Stock at Vendor
$ 1,860.00 USD
$ 1,860.00 USD

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features an Xtreme pressure plate, an R6 racing clutch disc, and an XACT Streetlite Flywheel.

Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.

The R6 clutch disc is an unsprung, rigid 6-pad racing disc that is recommended for drag and road racing and is better at handling high heat than the 4-pad disc. Its material composition is high quality, ceramic friction materials and a chrome-moly hub that has been heat treated for high strength. It has an increased torque capacity, and is better for faster shifting with its low weight and inertia. Being a racing disc, it has good durability, but a shortened spline life due to its rigid design. It also has a fast, aggressive engagement in comparison to standard street-use clutch discs.

The XACT Streetlite Flywheel is their most popular flywheel as it is great for both street and drag racing. It allows your engine to rev quicker, giving you increased throttle response, and is considerably lighter than your stock flywheel thanks to its light single-mass design, all while still being very durable!

Clutch Kit Specs:

  • Torque Rating: 665 ft/lbs
  • 117% torque capacity increase over stock!
  • Type of Disc: Racing
  • 26-count spline
  • Spline Size: 1-3/8" inch
  • Disc Weight: 4 lbs
  • Pressure Plate Weight: 10.7 lbs
  • Flywheel Weight: 24.5 lbs
  • 1 year Warranty from retail purchase date!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41897498
Part#: FW-055-AL4006TKT
Back Ordered
$ 1,778.99 USD
$ 1,778.99 USD
For BMW drivers pushing the limits of performance, the ClutchMasters 6 Puck Complete Clutch Kit w/ Aluminum Flywheel – FX400 Stage 4 from Turner Motorsport is the uncompromising solution for race-grade drivability and torque control.
Show More Show Less

XClutch - Corporate Logo
T#:26771719
Part#: XKBM23011-1A
Ships in 2 Business Days
$ 724.99 USD
Free Shipping
$ 724.99 USD
Free Shipping
The XClutch Stage 1 kit is one of XClutch's most adaptable kits for performance upgrades and conversions. Designed specifically for street driven vehicles, the Stage 1 single disc organic clutch is the ultimate street clutch. The twin disc organic upgrade optimizes pedal feel and reliability in high horsepower street driven vehicles. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 8.858" Clutch Disc Spline - 10 Disc Material - Organic Disc Type - Sprung Input Shaft Diameter - 1 9/64" Friction Surface Configuration - Raised Flywheel Step - +0.165 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337941
Part#: K03060HDO
Ships in 1 Business Day
$ 930.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 Daily Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
XClutch - Corporate Logo
T#:26904963
Part#: XKBM23545-2E
Ships in 2 Business Days
$ 1,924.99 USD
Free Shipping
$ 1,924.99 USD
Free Shipping
The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" range with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - -0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Track Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Pilot Bearing Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less


XClutch - Corporate Logo
T#:17804821
Part#: XKBM20522-2E
Ships in 2 Business Days
$ 1,892.99 USD
Free Shipping
$ 1,892.99 USD
Free Shipping
The XClutch 8" solid race clutch consists of a performance flywheel, solid-centered ceramic clutch discs, aluminium cover assembly, release bearing & carrier or internal hydraulic release bearing (HRB). XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 7/8" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.087 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Track Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28371157
Part#: K03063HD
Ships in 1 Business Day
$ 794.99 USD
$ 794.99 USD
Upgrade to South Bend Clutch's Stage 1 HD Clutch Kit for your 2.5L E85 Z4! Input Shaft Spline Count: 10 Input Shaft Diameter: 29mm Disc Diameter: 9.5" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337862
Part#: K03059HDTZ
Ships in 1 Business Day
$ 932.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:377805
Part#: K70288SSDXDB
Ships in 1 Business Day
$ 1,204.99 USD
Free Shipping on orders $49 and up
$ 1,204.99 USD
Free Shipping on orders $49 and up

This clutch package is built to handle heavily modified cars and designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass and are assembled with all high carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction co-efficient, rapid heat dissipation and abrupt engagement characteristics.

Stage 3 Drag/Drift Clutch Kits:

Recommended uses are drag, pulling, drifting

Conservatively rated to hold 650lbs/ft of torque

Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

South Bend Clutch - Corporate Logo
T#:28138154
Part#: K70288HDOFEKT
Ships in 1 Business Day
$ 644.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW's performance with the BMW E46 Z3 Stage 2 Endurance Clutch Kit, designed for durability and enhanced driving experience. This clutch kit is engineered to handle increased torque and power while maintaining everyday drivability. Perfect for enthusiasts looking to improve clutch performance without sacrificing comfort.

  • Enhanced durability for endurance driving
  • Handles increased torque and power
  • Maintains smooth and precise clutch engagement
  • Suitable for both street and track use

Experience improved clutch performance with the BMW E46 Z3 Stage 2 Endurance Clutch Kit.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:41931265
Part#: SB53A2STG3KT
In Stock at Vendor
$ 1,555.99 USD
$ 1,555.99 USD
The go-to upgrade for BMW drivers building serious power and needing a clutch system that keeps up with their ambition—on the road or at the track.

South Bend Clutch - Corporate Logo
T#:28337839
Part#: K03059HD
Ships in 1 Business Day
$ 677.00 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 1 HD Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28404603
Part#: K70010-HD-DXD-B
Ships in 1 Business Day
$ 609.99 USD
$ 609.99 USD
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your M42 Powered BMW! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.125" Disc Diameter: 9.5" Disc Material: Ceramic 6-Puck Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28371240
Part#: K03064HD
Ships in 1 Business Day
$ 753.99 USD
$ 753.99 USD
Upgrade to South Bend Clutch's Stage 1 HD Clutch Kit for your 2.5L E85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13" Disc Diameter: 9.44" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less

South Bend Clutch - Corporate Logo
T#:28138076
Part#: K03010HDDXD
Ships in 1 Business Day
$ 794.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 Drag Clutch Kit for your e28 528! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9” Disc Material: Ceramic Disc Style: 6-Puck Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28371154
Part#: K03061HDO
Ships in 1 Business Day
$ 2,533.99 USD
$ 2,533.99 USD
Upgrade to South Bend Clutch's Stage 2 Daily Clutch Kit for your S85-Powered SMG Transmission BMW! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9.5" Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337948
Part#: K03060HDTZ
Ships in 1 Business Day
$ 1,057.99 USD
$ 1,057.99 USD
Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: No Flywheel Included: No
Show More Show Less


DKM - Corporate Logo
T#:24610565
Part#: MR-006-054
Special Order: No Guaranteed ETA
$ 1,699.99 USD
Free Shipping on orders $49 and up
Rated for upwards of 650 ft/lbs, this multi-plate (Twin Disc) Clutch is sure to have the clamping force your E46 M3 needs. Equipped with dual 184mm ceramic discs, DKM (Der Kupplungmeister) has mastered the art of packing loads of clamping force into a small space. Kit Includes: 184mm Ceramic Clutch Discs - 2 Flywheel - 1 Pressure Plate - 1 All Hardware Throwout Bearing - 1 Clutch Alignment Tool - 1
Show More Show Less
South Bend Clutch - Corporate Logo
T#:28337837
Part#: K03042HDO
Ships in 1 Business Day
$ 1,203.99 USD
Free Shipping on orders $49 and up
Upgrade to South Bend Clutch's Stage 2 HD Clutch Kit for your e52 Z8! Input Shaft Spline Count: 10 Input Shaft Diameter: 1.13” Disc Diameter: 9.5” Disc Material: Organic Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No
Show More Show Less