Find Parts That Fit Your Vehicle

Packaged by Turner Cooling System Service

The cooling system is considered a weak point on several BMW generations. We put together cooling system service kits to help you get everything you need to refresh your system without any additional research. If you've done your research and know you only need one certain component, check out our Cooling category.
Sort By:

Packaged by Turner - Corporate Logo
T#:5376274
Part#: 11517586925TKT
In Stock
Sale - Save 25% $ 448.99

This product was last offered at the strikethrough price on
05-03-2026

$ 337.56 USD
Free Shipping
Sale - Save 25%
$ 448.99

This product was last offered at the strikethrough price on
05-03-2026

$ 337.56 USD
Free Shipping
Everything you need to replace your water pump and thermostat. The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Kit includes: Mahle-Behr thermostat Water pump Genuine BMW coolant thermostat to water pump hose Mounting hardware required for both the thermostat and water pump
Show More Show Less
Packaged by Turner - Corporate Logo
T#:554053
Part#: 11517604027KT1
In Stock
Sale - Save 25% $ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping
Sale - Save 25%
$ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

  • Mahle-Behr thermostat
  • Pierburg water pump
  • Genuine BMW coolant
  • Mounting hardware required for both the thermostat and water pump

 

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5376299
Part#: 11517632426TMSKT
In Stock
Sale - Save 13% $ 987.99

This product was last offered at the strikethrough price on
03-31-2026

$ 855.23 USD
Free Shipping
Sale - Save 13%
$ 987.99

This product was last offered at the strikethrough price on
03-31-2026

$ 855.23 USD
Free Shipping
Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)
Show More Show Less

Packaged by Turner - Corporate Logo
T#:554062
Part#: 11517801063KT2
In Stock
Sale - Save 6% $ 187.99

This product was last offered at the strikethrough price on
05-03-2026

$ 176.63 USD
Free Shipping
Sale - Save 6%
$ 187.99

This product was last offered at the strikethrough price on
05-03-2026

$ 176.63 USD
Free Shipping

The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Facet thermostat
  • Graf water pump
  • Vaico coolant
  • Mounting hardware required for the water pump

 

This item fits the following BMWs: 
2009+ E90 BMW 335d 
2009+ E70 BMW X5 xDrive35d

Show More Show Less

Packaged by Turner - Corporate Logo
T#:557216
Part#: E83M54BCKT
In Stock
Sale - Save 1% $ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 308.45 USD
Free Shipping
Sale - Save 1%
$ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 308.45 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:554065
Part#: 11517548263KT3
In Stock
Sale - Save 31% $ 336.99

This product was last offered at the strikethrough price on
05-03-2026

$ 232.63 USD
Free Shipping
Sale - Save 31%
$ 336.99

This product was last offered at the strikethrough price on
05-03-2026

$ 232.63 USD
Free Shipping

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Thermostat
  • Water pump
  • Coolant

 

This item fits the following BMW Engines: 
N63,N63N,S63,N62N 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:557236
Part#: E46M5XBCKT
In Stock
Sale - Save 9% $ 438.99

This product was last offered at the strikethrough price on
05-03-2026

$ 399.45 USD
Free Shipping
Sale - Save 9%
$ 438.99

This product was last offered at the strikethrough price on
05-03-2026

$ 399.45 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:557233
Part#: E39540BCKT2
Ships in 6 Business Days
Sale - Save 13% $ 389.99

This product was last offered at the strikethrough price on
05-03-2026

$ 340.78 USD
Free Shipping
Sale - Save 13%
$ 389.99

This product was last offered at the strikethrough price on
05-03-2026

$ 340.78 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:340196
Part#: E46COOLINGPACK
Ships in 3 Business Days
$ 613.99

This product was last offered at the strikethrough price on
08-12-2026

Starting at $ 612.46 USD
Free Shipping
Starting at $ 612.46 USD
Free Shipping
This is a compete cooling system overhaul kit, which includes all the common E46 cooling system failure parts bundled into a complete package. This cooling system package is for all of the non-M E46 3 series -- those made in 1999-2005 as well as 2006 coupes and convertibles.

The E46 cooling system is much like that of the previous generation 3 series. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Our kit includes one OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat (complete with housing), radiator cap, and new hoses (as pictured).

Optional items (which can be added below):
- Original BMW antifreeze
- Upgrade the water pump to a Stewart EMP High Performance pump
- Add a new coolant expansion tank (known for cracking)
- Add a new coolant level sensor (known for failing / throwing "check coolant" messages)

This cooling system overhaul kit fits the following BMWs:
1999-2000 E46 3 Series Sedan/Wagon - 323i & 328i
1999-2000 E46 3 Series Coupe/Convertible - 323Ci & 328Ci
2001-2005 E46 3 Series Sedan/Wagon - 325i, 325xi, 330i, 330xi
2001-2006 E46 3 Series Coupe/Convertible - 325Ci, 330Ci
Show More Show Less

Packaged by Turner - Corporate Logo
T#:557234
Part#: E8XE9XN54BCKT
Back Ordered
$ 1,036.99

This product was last offered at the strikethrough price on
04-06-2026

$ 996.99 USD
Free Shipping
$ 996.99 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:340246
Part#: TMS214376
In Stock
Sale - Save 24% $ 426.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 322.55 USD
Free Shipping
Sale - Save 24%
$ 426.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 322.55 USD
Free Shipping
This cooling overhaul will cover just about everything you could replace on the 325/330's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 325/330. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 325/330 with N52 engine and manual transmission.

The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


Base Cooling Overhaul Package - Water Pump and Thermostat
(click to expand)
Includes:
+ Genuine BMW electric water pump, p/n 11517586925
+ mounting screws for water pump (set of 3), p/n 11510392553
+ OEM Behr thermostat, p/n 11537549476
+ Original BMW connecting hose from thermostat to water pump, p/n 11537521049
+ OEM-style hose clamps for hose (x 2)

The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
Coolant Hoses
(click to expand)
With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 325/330 water hoses during this job (see diagram):
  • 17127531579, upper radiator hose (A)
  • 17127531581, lower radiator hose (B)
  • 11537552396, water pump to engine �
  • 11537545890, thermostat to cylinder head (includes new o-ring) (D)
    There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
Expansion Tank Options
(click to expand)
The expansion tank on the 325/330 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
Coolant Temp Sensors
(click to expand)
There are two coolant temp sensors on the E90 325/330 - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
13621433077, coolant temp sensor (in lower radiator hose)
13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

BUY AS A PACKAGE AND SAVE $$!

This cooling package fits the following BMWs with the N52 engine and a manual transmission:
2006-2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2006 E91 BMW 325xi - Wagon


Click on the options for your kit below and then click "update price" for your kit total.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:557247
Part#: E36BCKT2
Ships on Dec 17, 2026
Sale - Save 17% $ 274.99

This product was last offered at the strikethrough price on
05-03-2026

$ 229.04 USD
Free Shipping
Sale - Save 17%
$ 274.99

This product was last offered at the strikethrough price on
05-03-2026

$ 229.04 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:557244
Part#: E36BCKT
Ships on Dec 17, 2026
Sale - Save 17% $ 277.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.84 USD
Free Shipping
Sale - Save 17%
$ 277.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.84 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:557224
Part#: E9X328MBCKT
In Stock
Sale - Save 5% $ 674.60

This product was last offered at the strikethrough price on
04-17-2026

$ 639.87 USD
Free Shipping
Sale - Save 5%
$ 674.60

This product was last offered at the strikethrough price on
04-17-2026

$ 639.87 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:557232
Part#: E39M5XBCKT
In Stock
Sale - Save 9% $ 352.99

This product was last offered at the strikethrough price on
05-03-2026

$ 320.26 USD
Free Shipping
Sale - Save 9%
$ 352.99

This product was last offered at the strikethrough price on
05-03-2026

$ 320.26 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:339100
Part#: TMS224320
In Stock at Vendor
Starting at $ 515.24 USD
Free Shipping
Starting at $ 515.24 USD
Free Shipping
This is a customizable cooling system overhaul kit, which starts off with the basic radiator and water pump and can be configured to replace all the M54 common cooling system failure parts in one package. This cooling system package is for the 2003-2005 Z4 Roadster.

The Z4 cooling system is much like that of the sister 3 series. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Available with our kit is an OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat (complete with housing), radiator cap, new hoses, and other essential cooling parts.

Optional items (which can be added below):
  • Radiator cap
  • Major cooling hoses
  • Original BMW antifreeze
  • Upgrade the water pump to a Stewart EMP High Performance pump
  • Add a new coolant expansion tank (known for cracking)
  • Include a new coolant level sensor (known for failing / throwing "check coolant" messages)
  • Include a new coolant temp sensor (located in the lower radiator hose) (re-using the old sensor and seal may lead to a leak)
  • Add a new thermostat for an automatic transmission (located with the expansion tank).
    This cooling system overhaul kit fits the following BMWs:
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i

    Please put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340245
    Part#: TMS214380
    In Stock
    Sale - Save 24% $ 426.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 322.55 USD
    Free Shipping
    Sale - Save 24%
    $ 426.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 322.55 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 325/330's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 325/330i. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, all of the 325/330 cooling hoses, and the BMW antifreeze. This package fits 325i/330i/xi with N52 engine and automatic transmission. Some of the components are different for the automatic models because of the auto transmission oil cooler.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 325/330 water hoses during this job (see diagram):
    • 17127531579, upper radiator hose
    • 17127531581, lower radiator hose
    • 11537613176, water pump to engine
    • 11537534880, gasket for #176 hose
    • 11537545890, thermostat to cylinder head (includes new o-ring)
    • 17117524710, radiator to auto trans cooler
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 325/330 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
    Coolant Temp Sensors
    (click to expand)
    There are two coolant temp sensors on the E90 325/330 - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
    13621433077, coolant temp sensor (in lower radiator hose)
    13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N52 engine and an auto transmission:
    2006-2006 E90 BMW 325i 325xi 330i 330xi - Sedan
    2006-2006 E91 BMW 325xi - Wagon


    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340251
    Part#: TMS214378
    Ships in 4 Business Days
    Sale - Save 2% $ 621.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 611.54 USD
    Free Shipping
    Sale - Save 2%
    $ 621.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 611.54 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 328i. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, all of the 328 cooling hoses, and the BMW antifreeze. This package fits 328i/328xi with N52 engine and automatic transmission. Some of the components are different for the automatic models because of the auto transmission oil cooler.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 water hoses during this job (see diagram):
    • 17127531579, upper radiator hose
    • 17127564478, lower radiator hose
    • 11537613176, water pump to engine
    • 11537534880, gasket for #176 hose
    • 11537545890, thermostat to cylinder head (includes new o-ring)
    • 17117524710, radiator to auto trans cooler
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N52 engine and an auto transmission:
    2008-2012 E82 BMW 128i
    2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:557241
    Part#: E9X328BCKT
    In Stock
    Sale - Save 5% $ 711.99

    This product was last offered at the strikethrough price on
    03-24-2026

    $ 673.03 USD
    Free Shipping
    Sale - Save 5%
    $ 711.99

    This product was last offered at the strikethrough price on
    03-24-2026

    $ 673.03 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340252
    Part#: TMS214377
    In Stock at Vendor
    Sale - Save 9% $ 704.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 639.11 USD
    Sale - Save 9%
    $ 704.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 639.11 USD
    This cooling overhaul will cover just about everything you could replace on the 328's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 328i. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 328i/328xi with N52 engine and manual transmission.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 water hoses during this job (see diagram):
    • 17127531579, upper radiator hose (A)
    • 17127564478, lower radiator hose (B)
    • 11537552396, water pump to engine ©
    • 11537545890, thermostat to cylinder head (includes new o-ring) (D)
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N52 engine and a manual transmission:
    2008-2012 E82 BMW 128i
    2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:42873693
    Part#: TMS206099GKT
    In Stock
    $ 729.35 USD
    Free Shipping on orders $49 and up

     

    Our water pump/thermostat overhaul includes:

    • Electric Water Pump
    • Aluminum mounting screws for water pump
    • Thermostat
    • Connecting hose from thermostat to water pump 
    • Hose clamps

     

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340253
    Part#: TMS215325
    In Stock
    Sale - Save 7% $ 1,280.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 1,194.54 USD
    Free Shipping
    Sale - Save 7%
    $ 1,280.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 1,194.54 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328 SULEV's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N51 328i SULEV. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, all of the 328 SULEV cooling hoses, and the BMW antifreeze. This package fits 128i/328i SULEV with N51 engine and automatic transmission. Some of the components are different for the automatic models because of the auto transmission oil cooler.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N51 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 SULEV water hoses during this job (see diagram):
    • 17127531579, upper radiator hose
    • 17127531581, lower radiator hose
    • 11537613176, water pump to engine
    • 11537534880, gasket for #176 hose
    • 11537545890, thermostat to cylinder head (includes new o-ring)
    • 17117524710, radiator to auto trans cooler
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 SULEV is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
    Coolant Temp Sensors
    (click to expand)
    There are two coolant temp sensors on the 328 SULEV - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
    13621433077, coolant temp sensor (in lower radiator hose)
    13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N51 engine and an auto transmission:
    2008-2012 E82 BMW 128i SULEV
    2007-2011 E90 BMW 328i 328xi 328i xDrive SULEV - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive SULEV - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive SULEV - Coupe
    2007-2013 E93 BMW 328i SULEV - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:339099
    Part#: TMS16430
    In Stock at Vendor
    Starting at $ 515.24 USD
    Free Shipping
    Starting at $ 515.24 USD
    Free Shipping
    This is a customizable cooling system overhaul kit, which starts off with the basic radiator and water pump and can be configured to replace all the M54 common cooling system failure parts in one package. This cooling system package is for the 2003-2005 Z4 Roadster.

    The Z4 cooling system is much like that of the sister 3 series. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Available with our kit is an OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat (complete with housing), radiator cap, new hoses, and other essential cooling parts.

    Optional items (which can be added below):
  • Radiator cap
  • Major cooling hoses
  • Original BMW antifreeze
  • Upgrade the water pump to a Stewart EMP High Performance pump
  • Add a new coolant expansion tank (known for cracking)
  • Include a new coolant level sensor (known for failing / throwing "check coolant" messages)
  • Include a new coolant temp sensor (located in the lower radiator hose) (re-using the old sensor and seal may lead to a leak)
  • Add a new thermostat for an automatic transmission (located with the expansion tank).
    This cooling system overhaul kit fits the following BMWs:
    4/2004-2005 E85 BMW Z4 2.5i Z4 3.0i

    Please put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554106
    Part#: 17137607482KT8
    In Stock
    Sale - Save 4% $ 1,075.99

    This product was last offered at the strikethrough price on
    04-06-2026

    $ 1,031.91 USD
    Sale - Save 4%
    $ 1,075.99

    This product was last offered at the strikethrough price on
    04-06-2026

    $ 1,031.91 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E90/92/93 328i/328xi with the N52 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

    This kit fits the following BMWs:

    2007-2012 E90/92/93 328i, 328xi with Automatic Transmission 

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:338684
    Part#: TMS2003
    Ships in 3 Business Days
    Sale - Save 12% $ 668.99

    This product was last offered at the strikethrough price on
    02-27-2026

    Starting at $ 589.58 USD
    Free Shipping on orders $49 and up
    Sale - Save 12%
    $ 668.99

    This product was last offered at the strikethrough price on
    02-27-2026

    Starting at $ 589.58 USD
    Free Shipping on orders $49 and up
    This is a compete cooling system overhaul kit, which includes all of the common E36 cooling system parts bundled into a complete package. The basic overhaul includes: water pump, radiator, radiator hoses, and thermostat. We bundled these together with a package discount for your convenience and savings. Additional items are also available to better cover your cooling system repair. Contact us if you need any other E36 cooling system parts.

    The original E36's primary cooling components were prone to failure within 60k miles (or less in many cases). With better materials over the years we've seen that interval increase and you can now count on your water pump and radiator lasting at least 100,000 miles. That doesn't mean you can set aside preventaive maintenance. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system.

    Top Turner Tip!
    The very earliest E36s had infamous cooling system failures. But those are a thing of the past! We've got the best combination of parts to ensure a bulletproof E36 cooling system and it doesn't have to cost an arm and a leg. Our basic cooling package (OEM radiator and OE BMW water pump with composite impeller) is much better quality than what was available 20 years ago. And we can upgrade the system with full aluminum radiators, silicone hoses, and a stronger water pump. There are no more excuses for a weak E36 cooling system.

    Basic Kit Contents:
    17111469179, radiator (OEM Behr)
    11517527799, water pump (OE BMW)
    11537511580, 88°C thermostat (OEM Behr/Hella)
    11531708499, upper radiator hose (OEM Rein/CRP)
    11531726344, lower radiator hose (OEM Rein/CRP)
    17111742231, expansion tank cap (OEM Behr/Hella)

    Cooling Kit Options:
    E36 Water Pump Options
    (click to expand)
    OE BMW with composite impeller. The original BMW water pumps had plastic impellers which degraded and failed. The latest design uses composites that are much better and will not corrode. Compared to a metal impeller, the composite is lighter so it's more efficient and it will not wear out the bearings. We don't even offer the metal impeller pumps with this kit because the BMW composite one is so much better.
    Stewart high performance. The ultimate in M50 water pumps! It features a stainless steel impeller, heavy-duty bearings, a better o-ring seal, and flows 20% more than the stock pump. If indestructible is what you're looking for, this is the pump to go with. It also comes with a lifetime warranty for piece of mind.
    E36 Radiators
    (click to expand)
    The stock radiator and fan combination has no downside in capacity. But where it lacks is in durability. The plastic tanks and hose necks are prone to cracking and then leaking. If you notice ANY greenish-white staining on the plastic then it's a sure sign of a crack. To avoid the plastic failures altogether, move up to a full aluminum radiator.

    The MZ3 radiator has a thicker core and more capacity. Any time you can store the coolant away from the engine the better it will be. It will have less heat soak and lower overall temperatures.
    The budget aluminum radiator is the same size as stock but obviously doesn't have the plastic.
    The Fluidyne was designed with input from our own techs and race team. It's our go-to radiator for racing and track use.
    E36 Expansion Tank
    (click to expand)
    The original expansion tank is prone to cracks and leakage. Again - it's made from a weak plastic. The material has improved over the years but the only option remains an OEM plastic tank. It's a good idea to replace it if you're doing a whole overhaul. Don't re-use the original tank if you're going to the trouble of replacing everything else!
    E36 Thermostat Housing
    (click to expand)
    The original BMW plastic thermostat housing is brittle and does not seal well. We only sell it under protest. Instead we've been selling this aluminum housing for the last 20+ years. The aluminum does not have the same shortcomings as the plastic one. We made this item an option in case you already have the aluminum housing.

    Use the options below to build your cooling package.

    This cooling system overhaul kit fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557221
    Part#: E39528BCKT
    Ships in 1 Business Day
    Sale - Save 13% $ 259.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 225.86 USD
    Free Shipping
    Sale - Save 13%
    $ 259.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 225.86 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554066
    Part#: 11517838201KT2
    Ships in 1 Business Day
    Sale - Save 30% $ 287.99

    This product was last offered at the strikethrough price on
    04-07-2026

    $ 200.28 USD
    Free Shipping
    Sale - Save 30%
    $ 287.99

    This product was last offered at the strikethrough price on
    04-07-2026

    $ 200.28 USD
    Free Shipping

    The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

    Kit includes:

    • Mahle-Behr thermostat
    • Geba water pump
    • Vaico coolant
    • Mounting hardware required for the water pump
    • O-rings for the thermostat housing

     

    This item fits the following BMWs:
    2005+ E60 BMW M5
    2005+ E63 BMW M6

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554064
    Part#: 11517586925KT13
    In Stock
    $ 513.99

    This product was last offered at the strikethrough price on
    06-18-2026

    $ 496.99 USD
    Free Shipping
    $ 496.99 USD
    Free Shipping

    The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

    Kit includes:

    • Thermostat
    • Water pump
    • Coolant
    • Mounting hardware required for the water pump

     

     

    This water pump fits the following BMWs:

    E70 X5 3.0si X5 xDrive30i without adaptive drive pr 4 zone climate control 

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554556
    Part#: 17111436062KT2
    Ships in 3 Business Days
    $ 2,392.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 2,386.99 USD
    $ 2,386.99 USD
    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2003 E39 M5 with the S62 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557311
    Part#: E46NONMPCKT3
    Ships in 3 Business Days
    Sale - Save 2% $ 1,458.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,429.54 USD
    Free Shipping
    Sale - Save 2%
    $ 1,458.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,429.54 USD
    Free Shipping

    If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

    Additional items included in this kit:

    • OEM Replacement Coolant Hoses
    • OEM Expansion Tank, Cap, and Level Sensor
    • OEM Belts, Tensioners, and Pulleys
    • OEM Auxiliary Fan Switch
    • Genuine BMW Hardware for Easy Installation
    • ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338704
    Part#: TMS14417
    Ships in 6 Business Days
    Sale - Save 7% $ 773.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 723.61 USD
    Sale - Save 7%
    $ 773.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 723.61 USD
    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2003 540i with the M62TU VAN0S 4.4-liter engine. This package applies to cars equipped with either the manual or automatic transmission (select the appropriate parts in the menu below).

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Our bundled package includes the following:
  • OEM Behr radiator (select for manual or automatic transmission)
  • OEM water pump (choose either the metal or composite impeller)
  • OE BMW coolant temp sensor (located in the water pump housing)
  • OEM Behr thermostat with housing and sensor
  • OEM Behr expansion tank with cap
  • OE BMW upper and lower radiator hoses with expansion tank hose
    Optional items (which can be added below):
    - OE BMW antifreeze
    - Add a new coolant level sensor (known for failing / throwing "check coolant" messages)
    - Replace the heat exchanger coolant lines for the automatic transmission
    - Add a new fan clutch

    Buy as a package and save $$$!

    This cooling system overhaul kit fits the following BMWs:
    1999-2003 E39 BMW 540i
    1999-2001 E38 BMW 740i 740il
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338714
    Part#: TMS14418
    Ships in 1 day
    $ 1,201.99

    This product was last offered at the strikethrough price on
    06-05-2026

    Starting at $ 1,192.27 USD
    Free Shipping
    Starting at $ 1,192.27 USD
    Free Shipping
    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2003 E39 M5 with the S62 engine.

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. Our bundled package includes the following:
  • OEM Behr radiator
  • OEM Laso or OE BMW water pump with gasket
  • OE BMW coolant temp sensor (located in the water pump housing)
  • OEM Behr thermostat with o-ring
  • OE BMW o-rings for the inner coolant tubes
  • OE BMW expansion tank cap
  • OE BMW upper and lower radiator hoses with OE-style clamps
  • OE BMW expansion tank hose with OE-style clamps
    Optional items (which can be added below):
    - OE BMW antifreeze
    - Add a new coolant level sensor (known for failing / throwing "check coolant" messages)
    - Add a new plastic expansion tank (if it's never been changed it's a risk of a crack or leak)
    - Add a new fan clutch

    Buy as a package and save $$$!

    This cooling system overhaul kit fits the following BMWs:
    1999-2003 E39 BMW M5
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:557230
    Part#: E39540BCKT
    Ships in 1 Business Day
    Sale - Save 11% $ 449.99

    This product was last offered at the strikethrough price on
    04-21-2026

    $ 398.70 USD
    Free Shipping
    Sale - Save 11%
    $ 449.99

    This product was last offered at the strikethrough price on
    04-21-2026

    $ 398.70 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:557214
    Part#: E9XM3BCKT
    Ships in 3 Business Days
    $ 632.99

    This product was last offered at the strikethrough price on
    02-27-2026

    $ 551.99 USD
    Free Shipping
    $ 551.99 USD
    Free Shipping
    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557321
    Part#: E9XM3PCKT2
    Ships in 5 Business Days
    $ 2,321.15 USD
    Free Shipping
    $ 2,321.15 USD
    Free Shipping
    To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative!
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557320
    Part#: E9XM3PCKT
    Ships in 5 Business Days
    $ 2,335.08 USD
    Free Shipping
    $ 2,335.08 USD
    Free Shipping
    To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative!
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:339091
    Part#: TMS16426
    Ships on Dec 17, 2026
    Sale - Save 14% $ 628.99

    This product was last offered at the strikethrough price on
    06-15-2026

    Starting at $ 539.49 USD
    Free Shipping
    Sale - Save 14%
    $ 628.99

    This product was last offered at the strikethrough price on
    06-15-2026

    Starting at $ 539.49 USD
    Free Shipping
    This is a compete cooling system overhaul kit, which includes all of the common Z3 M52 cooling system failure parts bundled into a complete package. This cooling system package is for the 1997-1998 Z3 2.8 Roadster and 1998-2000 MZ3 M Roadster or M Coupe.

    The Z3 cooling system's primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Our kit includes one OEM Behr radiator, an Original BMW waterpump (with updated composite impeller and O-ring), thermostat (complete with O-ring), aluminum thermostat housing, profile gasket, radiator cap and new hoses (as pictured).

    Optional items (which can be added below):
    - Upgrade the waterpump to a Stewart/EMP High Performance pump
    - Original BMW antifreeze
    - Add a new coolant expansion tank (known for cracking)

    Buy as a package and save!!

    This cooling system overhaul kit fits the following BMWs:
    1997-1998 Z3 2.8 M52 Roadster
    1998-2000 Z3 M Roadster, M Coupe
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338650
    Part#: TMS16418
    Ships in 1 day
    Starting at $ 713.99 USD
    Starting at $ 713.99 USD
    This cooling package for the E30 M3 consists of all of the major components on the S14's cooling system. There are no major weak points to the E30's cooling system, unless you count skipped maintenance. The entire system is serviceable in individual components so you don't need to buy a complete package of parts. Many of the indivdual parts are on our site but we have setup this package to cover all or most of what you would need to perform a major overhaul. This overhaul package consists of an Genuine BMW radiator and then you build the package from there. Add hoses, sensors, water pumps, thermostats, gaskets, hose clamps, and more. We also sell the Original BMW antifreeze to finish off the job.

    Any problems with the cooling system are likely electrical. Sensors become corroded and fail over time which will send the incorrect signal to the corresponding unit, including the engine computer. Diagnosis of electrical type problems is easy and repair with the OEM Bosch or OE BMW sensors is not too expensive for a car like this. Electrical connections, particularly solder joints, can also become brittle and fail. These are not helped by the intense vibrations of the S14.

    Top Turner Tip for a healthy S14!
    E30 M3s always seem to have cooling problems at the most inconvenient time. If the temp gauge starts rising in the summer months first check and make sure your auxiliary cooling fan is working if it's not it's most likely the switch or the wiring going to the switch. Also remember that the E30 instrument conductor plate can make the gauge read whacky try tapping the gauge if it seems like it's acting up. When it's time to do a water pump (which weeps through a hole on the bottom before it goes completely) take a good look at the radiator too its not expensive and you have to remove it to install the pump anyway.

    Use the options below to build your package.

    This cooling package fits the following BMWs:
    1988-1991 E30 BMW M3
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554725
    Part#: E9XM3CSO2KT
    Ships in 3 Business Days
    $ 1,810.99 USD
    $ 1,810.99 USD
    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package.

    Packaged by Turner - Corporate Logo
    T#:340254
    Part#: TMS215326
    Ships in 1 day
    Starting at $ 1,233.54 USD
    Free Shipping
    Starting at $ 1,233.54 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328 SULEV's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N51 328 SULEV. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 128/328 SULEV with N51 engine and manual transmission.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N51 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Coolant Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 SULEV water hoses during this job (see diagram):
    • 17127531579, upper radiator hose (A)
    • 17127531581, lower radiator hose (B)
    • 11537552396, water pump to engine ©
    • 11537545890, thermostat to cylinder head (includes new o-ring) (D)
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 SULEV is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
    Coolant Temp Sensors
    (click to expand)
    There are two coolant temp sensors on the 328 SULEV - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
    13621433077, coolant temp sensor (in lower radiator hose)
    13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N51 engine and a manual transmission:
    2008-2012 E82 BMW 128i SULEV
    2007-2011 E90 BMW 328i 328xi 328i xDrive SULEV - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive SULEV - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive SULEV - Coupe
    2007-2013 E93 BMW 328i SULEV - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554104
    Part#: 11517839062KT10
    Ships in 3 Business Days
    $ 1,796.35 USD
    $ 1,796.35 USD
    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package.
    Packaged by Turner - Corporate Logo
    T#:338775
    Part#: TMS216193
    Ships in 1 day
    $ 658.99

    This product was last offered at the strikethrough price on
    05-06-2026

    Starting at $ 632.99 USD
    Free Shipping
    Starting at $ 632.99 USD
    Free Shipping

    The cooling system is one of the major weak points on the N62 engine in the 550i/650i. The water pump itself won't last more than 100,000 miles in most cases and the engine itself is prone to coolant leaks from multiple locations. So a major 550i cooling system overhaul should be planned before the 100,000 mile mark. Aside from obvious leaks the 550i water pump will also squeal or screech indicating the bearings inside have worn. This package covers the water pump, thermostat, and radiator for the 2006-2010 E60 550i and E63 650i with a manual transmission.

    The entire cooling system on the 550i is susceptible to leaks and poor performance. The condition of the rest of the cooling system should be considered along with the water pump and thermostat. Replacing the water pump will expose the front of the V8 engine where more problem areas may appear so plan accordingly. The biggest problem is the V8 valley pan gaskets and inner coolant tube seals. The tube carrying coolant through the valley is prone to leaking and replacement is a major job (see our valley pan pipe kit here). Additional items recommended to be replaced during the water pump job are: cooling hoses, expansion tank and cap, temp sensors, drive belts, and pulleys and tensioners.

    Base 550i/650i Cooling Package includes:

    • OEM Behr radiator (17117519210)
    • OEM water pump (11517586779)
    • water pump pipe (back of pump to engine block) (11511439976)
    • OEM thermostat (11537586885)
    • BUY AS A PACKAGE AND SAVE $$!

      This item fits the following BMWs:
      2006-2010 E60 BMW 550i with manual transmission
      2006-2011 E63 BMW 650i with manual transmission
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340205
    Part#: TMS215350
    Ships in 1 day
    Sale - Save 41% $ 855.99

    This product was last offered at the strikethrough price on
    07-31-2026

    Starting at $ 503.21 USD
    Free Shipping
    Sale - Save 41%
    $ 855.99

    This product was last offered at the strikethrough price on
    07-31-2026

    Starting at $ 503.21 USD
    Free Shipping

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 2008-2010 E60 528i/528xi models with an automatic transmission (N52 engine).

    Much of the later E60 cooling system is strong and reliable compared to the previous generation 5-series models. But there is still the potential for serious cooling system and engine-related failures. On the N52 engine the electric water pump is the weakest link. It will fail without much warning and shut down the engine. Preventative replacement is the best course of action and the water pump and thermostat should be done before they reach 60,000 miles. Several other cooling components are due for replacement by 100,000 miles to prevent other breakdowns. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system.

    Our base kit comes with the OEM Behr thermostat, Original BMW electric water pump with mounting screws, and the u-shaped hose between the pump and thermostat. From there you can add additional items to complete the overhaul - radiator, expansion tank, cap, and new radiator hoses..

    E60 528i Automatic Radiator Options. There are two styles of radiators for the E60 6-cylinder and automatic transmission: original and updated. You can use either radiator as long as you have the correct corresponding parts to go with it. Both radiators are still available from BMW or the OE supplier Behr. If it were up to us we would prefer the updated style because it won't cause any confusion down the road and it reduces the number of potential leak points by eliminating an unnecessary fitting.

    • Original, BMW #17117534914. This setup has an extra fitting for the engine oil heat exchanger along with a hose that attaches to the water pump pipe and heat exchanger. In order to use this radiator you must use the corresponding hose. This was the original setup as the car was built at the factory and is pictured in the radiator image to the right. At some point BMW stopped listing this part number in their official diagrams and used the 209 number below.
    • Updated, BMW #17117519209. This is the updated style from BMW. If your radiator was replaced at some point after 2010 it most likely has this radiator style. On this radiator they did away with the extra fitting for the heat exchanger. When looking at the ETK or RealOEM diagrams it will only list this radiator but with a note saying you also need two compensators (spacer blocks, #17117520335) and the hose (11537519494).

    Click here for diagrams of both E60 radiator options.

    E60 528i Cooling Hoses. There are a lot of hoses on the N52 engine. Not all of them need to be replaced during an overhaul but it would be a good idea. The hoses themselves don't wear but the metal spring clips on the connector lose their tension over time and that can lead to a leak. It's worse when re-using a hose after it's already been disconnected. Since our package includes the thermostat, water pump, and radiator we offer all of the hoses related to those components. Use the diagram on the right to see where each is connected in the engine bay. Evaluate your current hoses and then decide which ones to replace. One note about the lower radiator hose: when ordering a new hose you must order a new temp sensor. Do not reuse the original temp sensor as it will leak on the new hose.

    This item fits the following BMWs:
    2008-2010 E60 BMW 528i 528xi with automatic transmission

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5498481
    Part#: E46M5X2KT
    In Stock
    Sale - Save 4% $ 474.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 456.76 USD
    Free Shipping
    Sale - Save 4%
    $ 474.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 456.76 USD
    Free Shipping
    Prevent cooling issues and take service of your cooling system one step further with a Turner Motorsport Level 2 Cooling System Maintenance Kit. The experts at Turner have identified all of the common parts that fail on a BMW and included them all in this convenient kit. BMW has been designing notoriously failure-prone cooling systems since the late 1980s. The coolant capacity in most BMW engines is not sufficient to accommodate any driving or overheating near red zone temperatures. If the coolant reaches this critical temperature, it is common for thousands of dollars in damage to occur. Stop the problems before they arise. If your BMW has 80,000 miles or more, replace all of these components to ensure that your vehicle stays healthy. Avoid water pump failure, cracked thermostat housings, and expansion tank leaks, which all lead to overheating and subsequent damage. This kit was put together by Turner for a complete cooling system service. GEBA water pump with metal impeller Ecs aluminum water pump pulley Fan switch Thermostat and thermostat housing Sealing gaskets Expansion tank with level sensor, clamp and cap 1 Gallon Coolant Upper & lower radiator hoses Accessory drive belts Radiator drain plug
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554544
    Part#: 17113400013KT3
    Ships in 1-2 days
    Sale - Save 2% $ 873.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 854.60 USD
    Sale - Save 2%
    $ 873.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 854.60 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E83 with the M54 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

     

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:557308
    Part#: E46NONMPCKT2
    Ships in 3 Business Days
    $ 1,520.99

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 1,511.99 USD
    Free Shipping
    $ 1,511.99 USD
    Free Shipping

    If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

    Additional items included in this kit:

    • OEM Replacement Coolant Hoses
    • OEM Expansion Tank, Cap, and Level Sensor
    • OEM Belts, Tensioners, and Pulleys
    • OEM Auxiliary Fan Switch
    • Genuine BMW Hardware for Easy Installation
    • ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557227
    Part#: E8XE9XN55ABCKT
    Ships in 3 Business Days
    Sale - Save 24% $ 745.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 568.92 USD
    Free Shipping
    Sale - Save 24%
    $ 745.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 568.92 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554546
    Part#: 11517527910KT17
    Ships in 1 Business Day
    Sale - Save 4% $ 1,016.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 978.39 USD
    Sale - Save 4%
    $ 1,016.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 978.39 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E39 528i with the M52 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

    This kit fits the following BMWs:

    09/1998 - 2000 E39 528i

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:30861164
    Part#: 17137787039KT
    Ships in 3 Business Days
    Sale - Save 10% $ 1,934.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,737.22 USD
    Sale - Save 10%
    $ 1,934.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,737.22 USD
    Packaged by Turner - Corporate Logo
    T#:557310
    Part#: E46NONMPCKT4
    Ships in 3 Business Days
    $ 1,543.99

    This product was last offered at the strikethrough price on
    06-23-2026

    $ 1,540.99 USD
    $ 1,540.99 USD

    If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

    Additional items included in this kit:

    • OEM Replacement Coolant Hoses
    • OEM Expansion Tank, Cap, and Level Sensor
    • OEM Belts, Tensioners, and Pulleys
    • OEM Auxiliary Fan Switch
    • Genuine BMW Hardware for Easy Installation
    • ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley
    Show More Show Less