Turbos

FrankenTurbo F800 Twin-scroll Hybrid Turbocharger - BMW F07/F10/F11 5...

T#:51426475

Part#: F800EWG-F1X

Ships in 2 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The FrankenTurbo F800 Hybrid Turbocharger allows for more aggressive ignition timing and lower EGTs at high power levels.

VTT GC Turbocharger Upgrade - B58TU 2-Port (A90 MK5 Supra)

T#:25507162

Part#: B58TU2GC

Ships in 10 Business Days

$ 1,858.99 USD

Add to Wish List

Qty

$ 1,858.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” turbocharger upgrade. We start by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC's are a drop in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side, and bearing housing only Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9-blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next-day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow As with any turbocharger upgrade it should be coupled with complimenting upgrades such as fuel system upgrades, intake, downpipe, intercooler, tune, etc. While you will see gains going from stock turbo to a GC/GC+ with no other changes, to realize the full potential of the upgrade other parts/tune must be added. The GC, GC-MID, and GC+ Come with a silicone intake tube, that will fit the stock airbox, and SOME intakes with no mods. It does not fit all, such as Injen, etc. If this is the case, you can either modify something work, or you can add the VTT MAF housing, and filter which will work with the GC inlet hose. Please be aware. This system removes the PTC heater, and it WILL register a shadow code in the DME. In our testing, this did NOT throw a check engine light. The code is only there if your scan the car. If you wish to remove the code it must be coded out.

Show More Show Less

FrankenTurbo F800 Twin-scroll Hybrid Turbocharger - BMW F87 N55 w/ EW...

T#:51531903

Part#: F800EWG-M2F87DV

Back Ordered

$ 2,099.00 USD

Add to Wish List

Qty

$ 2,099.00 USD

Add to Wish List

The FrankenTurbo F800 offers a "no-compromise" solution for F87 M2 owners looking durable, smooth and terrifyingly impressive power.

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

T#:32118905

Part#: EVE-X56M-LCI-CHG

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M LCI F96 X6M LCI G09 XM LCI G05 X5 M60i LCI G06 X6 M60i LCI G07 X7 M60i LCI ** This item is not eligible for return **

Show More Show Less

CTS S55 Stage 2+ Turbo Upgrade - BMW F8X S55 3.0L

T#:20946760

Part#: CTS-TR-0055

Ships in 7 Business Days

$ 3,199.00 USD

Add to Wish List

Qty

$ 3,199.00 USD

Add to Wish List

CTS Turbo is excited to announce the release of our latest Stage 2+ aka the “RS” turbocharger set, designed specifically for the BMW S55 platform. This kit builds on the success and knowledge of the previous turbo projects we have made and incorporates new technology to optimize performance and maintain factory fitment. Our engineers utilized transient flow analysis and flow bench testing to optimize the twin-scroll turbine housing while maintaining stock fitment, stock location, and stock wastegates. This allows for the use of any stock fitment downpipes, intakes, and charge pipes. The result is an impressive 808whp on a built engine with supporting mods. You can simply transfer your factory wastegates, high-performance downpipes, intake, and charge pipes during the installation. No custom parts are needed and all factory installation hardware and gaskets are used! The kit features complete brand-new turbochargers and large inlet pipes. No need for cores to be sent in or purchased. Each turbocharger is VSR balanced to exceed OE tolerances with upgraded heavy-duty bearings and thrust washers. We supply reinforced silicone inlets, that are compatible with any intake system. These inlets will not collapse or deform under vacuum. Our turbochargers are designed to move a lot of air at lower boost levels, which means you can make some serious power without over-speeding the turbos, which means reliable performance. Optimal boost levels are 24-25psi with approximately 85-88% WGDC. This must be confirmed by your tuner and adjusted, depending on your build. Features: Complete brand new turbocharger; no need for core to be sent it or purchased Bolt-on journal bearing CHRA with HD bearings, turbine shaft diameter increased by 0.5mm and thrust surface increased by 2mm Billet 8 blade compressor wheel, 47.4mm inducer, 58mm exducer with 63.10mm extended tip design 9 blade Mar-M 246 Superalloy turbine wheel, 52mm inducer, 45.6mm exducer, high-flow 316 stainless steel exhaust housings and wastegate components VSR Balanced to exceed OE tolerances Wire-reinforced silicone turbo inlet included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuators (not included, use your original wastegate actuators) Fitment: 2015 – 2020 BMW M3 and BMW M4 with S55 engine (F80, F82, F83) 2018 – 2021 BMW M2C and BMW M2CS with S55 engine (F87) NOTE: Installation and tuning must be performed by a qualified professional. Wastegate actuators MUST be calibrated using ISTA+ software before tuning.

Show More Show Less

VTT N54 Wastegate Removal Tool

T#:587520

Part#: VTT-WG-TOOL

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Need to replace the wastegates on your N54 turbos, but do not have the tools to get the bungs out of the housings? This can be frustrating, and require sending your housings to a shop with a large press or make a puller. Vargas Turbo Technologies take the guesswork out of it for you by offering a tool that makes bung removal simple, and easy. Simply grind your old flappers off, and remove them from the bungs, then using the VTT tool the bung removal is a snap. Once out, you can reinstall the new bungs and have the flappers welded in the proper location. The tool is made from steel for high strength and long life. This tool is a must-have when doing wastegates on the N54 turbos! Tool kit comes the following: 1 Bung sleeve 1 Threaded removal arm 1 7/16"-14 3" bolt

Show More Show Less

Pure Turbos N63TU Stage 1 Turbo Upgrade - BMW F01/02 F06/12/13 F07/10...

T#:578305

Part#: PURE-N63-0005KT

Ships in 4 Business Days

$ 3,842.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,700.00 USD

Add to Wish List

Qty

$ 3,700.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63TU, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers its Stage 1 turbo upgrade package for those looking to reliably increase power to 650+whp with supporting modifications.

Show More Show Less

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

T#:52270239

Part#: GARING25

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Unlock the full potential of your Garrett G-Series turbocharger with the VTT-FAB Precision Inlet Flange.

Pure Turbos B58 Gen2 PURE650 Turbo Upgrade - 2-Port - BMW G-Chassis B...

T#:53255645

Part#: B58G2P650-2PKT

Ships in 4 Business Days

$ 3,605.99

This product was last offered at the strikethrough price on
07-15-2026

$ 3,500.00 USD

Add to Wish List

Qty

$ 3,500.00 USD

Add to Wish List

The Pure Turbos Pure650 for the BMW B58 (Gen 2) is a high-performance turbocharger upgrade specifically engineered for 2-port cylinder head applications. Unlike the "New" series, this version is built using a precision-remanufactured approach that requires a core exchange, allowing enthusiasts to transform their factory unit into a powerhouse capable of over 600 wheel horsepower. The upgrade features a custom-designed billet compressor wheel and a larger, high-flow turbine wheel, both of which are integrated into the stock housing to maintain a stealthy, factory appearance while significantly increasing exhaust efficiency and boost capacity. To ensure long-term reliability under increased boost levels, each Pure650 unit is equipped with an upgraded bearing housing and undergoes meticulous VSR high-speed balancing. This process guarantees smooth operation and durability that meets or exceeds OEM standards. The kit is designed for a seamless, bolt-on installation and includes a high-flow silicone inlet pipe to further optimize intake airflow. While this turbo provides a massive increase in top-end power, it is tuned to retain the rapid spool and low-end torque characteristics that B58 owners value, making it an exceptional choice for those seeking a balance between daily drivability and track-ready performance.

Show More Show Less

Rein Turbo Oil Line Return Pipe

T#:17738388

Part#: 11427577010KT

Ships in 1 Business Day

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Rein OE quality oil return pipe manufactured with premium rubber designed to be a direct-fit replacement

Rein Turbocharger Vacuum Reservoir - E chassis - N54

T#:53856273

Part#: 11652247620

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

The Rein Automotive OE Series vacuum reservoir is engineered to maintain peak pneumatic response within your vehicle’s forced induction system.

Toyota Supra (A90/A91) Pure850 Turbocharger (2 Port) - (NO LONGER AV...

T#:26771695

Part#: SUPRAPURE8502KT

No longer available

Pure Turbos N63 Stage 1 Turbo Upgrade - E70/71 F01/02 F07/10/12/13 N6...

T#:578293

Part#: PURE-N63-0001KT

Ships in 4 Business Days

$ 3,728.99

This product was last offered at the strikethrough price on
07-15-2026

$ 3,426.99 USD

Add to Wish List

Qty

$ 3,426.99 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers their Stage 1 turbo upgrade package for those who are looking to increase power up to 650+whp reliably with supporting modifications. These upgraded OEM turbos carry over some of the best design features of Pure Turbos: Upgraded billet compressor wheel Large pad, heavy-duty thrust CNC machined and high-speed VSR balanced Direct fit, as OEM, as these utilize OEM housings. Featuring a limited 1 year warranty. This price includes a $800 core charge that will be refunded upon us receiving your rebuildable core.

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 135, 53...

T#:52270248

Part#: GCL135BLA

Ships in 10 Business Days

$ 2,789.99 USD

Add to Wish List

Qty

$ 2,789.99 USD

Add to Wish List

For N54 owners looking to replace aging factory units or seeking a reliable path to high horsepower, the VTT GC-Lite 2.0 is the ultimate "stock location" solution.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Pure Turbos S55 PURE1000 Turbo Upgrade - BMW F8X M2/M3/M4 S55 3.0L ...

T#:46444169

Part#: S55PURE1000

Ships in 4 Business Days

$ 4,663.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,663.00 USD

Add to Wish List

Qty

$ 4,663.00 USD

Add to Wish List

The factory turbochargers found on the S55 engine are reliable and great for daily drivers, but tend to fall short for those looking to make greater power or plan on regularly tracking their M car. Pure Turbo's PURE1000 turbocharger upgrade kit for the S55 engine is the perfect addition for anyone looking to greatly increase their BMW's power potential. With supporting modes, these turbos are more than capable of making more than 900+ wheel horsepower.

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - F87 M2 N55 3.0L

T#:578290

Part#: PURE-N55-0007KT

Back Ordered

$ 3,114.99 USD

Add to Wish List

Qty

$ 3,114.99 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55-powered F87 M2 BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty.

Show More Show Less

Basic Boost Solenoid Kit - BMW E90 E70 M57 3.0L

T#:51883669

Part#: T11658509323BKT

In Stock

Sale - Save 3% $ 176.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.26 USD

Add to Wish List

Qty

Sale - Save 3%

$ 176.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.26 USD

Add to Wish List

The factory boost solenoids, also known as pressure converters, are a common issue on the M57 engine. The vacuum hose also hardens over time due to heat, and can crack or split, leading to vacuum leaks. These failures result in a loss of power, limp mode, lazy throttle response, and check engine lights. This basic kit includes two replacement boost solenoids to restore engine power and performance, plus new silicon vacuum hose that will last much longer than the OE rubber vacuum hose.

Show More Show Less

Rein Turbo Oil Return Pipe - F30, F32, F33, F34, F36, F22, F23, G11, ...

T#:53856281

Part#: 11427643176

In Stock at Vendor

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

The Rein Turbo Oil Feed Pipe is engineered to meet the rigorous tolerances required by high-performance forced induction systems.

N54/N55 Single turbo head flange (Mild steel)

T#:398016

Part#: VTT-FLNG-1

Ships in 10 Business Days

$ 393.99 USD

Add to Wish List

Qty

$ 393.99 USD

Add to Wish List

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

VTT F-RB Turbocharger - BMW N54 E9X 335i LHD

T#:52270282

Part#: N54-FRB-1

Ships in 10 Business Days

$ 3,199.99 USD

Add to Wish List

Qty

$ 3,199.99 USD

Add to Wish List

The VTT N54 F-RB Turbocharger Kit is the ultimate solution for 335i LHD owners who refuse to compromise between daily driveability and track-shredding power.

Vargas GC+ Turbocharger Upgrade - BMW F90 M5, F9X M8

T#:52270238

Part#: VTT-F90-GC+

Ships in 10 Business Days

$ 6,299.99 USD

Add to Wish List

Qty

$ 6,299.99 USD

Add to Wish List

The VTT GC+ Turbocharger Upgrade is the ultimate solution for BMW F9X owners looking to push the absolute limits of the S63TU4 engine.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

Pure Turbos N63 Pure Stage 2 Turbo Upgrade - BMW E70 E71 F01/02 F06/1...

T#:46478564

Part#: N63STG2KT

Ships in 4 Business Days

$ 4,977.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,795.00 USD

Add to Wish List

Qty

$ 4,795.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers their Stage 2 turbo upgrade package for those looking to reliably increase power to 850+ whp with supporting modifications.

Show More Show Less

E9X N54 Stock Turbo Replacement with Upgraded Compressor Wheel ...

T#:597619

Part#: VTT-STK-1-COKT

Ships in 10 Business Days

$ 1,709.99 USD

Add to Wish List

Qty

$ 1,709.99 USD

Add to Wish List

Upgrade your OEM turbos, and add the Billet Compressor wheel option from VTT. These are fully forged billet wheels, utilizing the ultra-efficient 6×6 blade wheel design as well as extended tip technology to increase airflow a solid 20% over the cast 10T wheels.

Show More Show Less

Rein Turbo Charger Kit - B58

T#:53785545

Part#: TRK0025

In Stock at Vendor

$ 475.99 USD

Add to Wish List

Qty

$ 475.99 USD

Add to Wish List

Rein TechSelect Turbo Kits feature replacements to the OE Turbocharger, including brackets, hardware and gaskets.

Garrett Turbocharger W/ Exhaust Manifold - BMW G01/02 G20/22/23/26 G3...

T#:33446283

Part#: 11658662073

Ships in 1 Business Day

$ 1,490.99 USD

Add to Wish List

Qty

$ 1,490.99 USD

Add to Wish List

Replace your faulty turbo with a brand new Garrett turbocharger, engineered for optimal performance and reliability. Designed to meet or exceed OEM specifications, this turbocharger enhances engine efficiency, delivering improved power and torque across the RPM range when compared to your stock, worn-out turbo. Crafted with precision, it features a robust aluminum housing and a high-strength turbine wheel for superior durability and heat resistance. The advanced aerodynamics maximize airflow, ensuring quick spool-up and a responsive driving experience. Ideal for both daily drivers and performance enthusiasts, this turbocharger is a direct fit, making installation straightforward and hassle-free.

Show More Show Less

Vargas Plug & Play Upgraded DV Kit - Single DV, Dual Port - BMW G9X ...

T#:52270292

Part#: S68DVSINGDP

Ships in 10 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The VTT S68 Upgraded DV Kit is an essential upgrade for owners of the G90 M5 or BMW XM looking to move beyond the limitations of factory hardware.

Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4

T#:52164907

Part#: S58INTPBLK

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Upgrade your S58’s reliability and power with the VTT Silicone Inlet Pipe Kit.

Vargas GC-Mid Turbocharger Upgrade - BMW B58 TU 2-port

T#:52305479

Part#: B58-GCMID-2

Ships in 10 Business Days

$ 2,409.99 USD

Add to Wish List

Qty

$ 2,409.99 USD

Add to Wish List

Engineered specifically for the B58TU 2-port platform, the VTT GC-Mid (Game Changer - Mid) focuses on volumetric efficiency and thermal management.

Pure Turbos B58 Gen2 PURE800 Turbo Upgrade - 2-Port - BMW G-Chassis B...

T#:53255648

Part#: B58G2P800-2PKT

Ships in 4 Business Days

$ 4,124.99

This product was last offered at the strikethrough price on
07-15-2026

$ 4,094.00 USD

Add to Wish List

Qty

$ 4,094.00 USD

Add to Wish List

The Pure Turbos Pure800 for the BMW B58 (Gen 2) is a premier performance upgrade designed for 2-port cylinder head applications, offering a substantial leap in power for G-Series owners. This version is engineered by utilizing the factory turbocharger footprint, requiring a core exchange to transform the original unit into a high-output system capable of exceeding 700 wheel horsepower. At the heart of this upgrade is a custom-engineered, larger billet compressor wheel and a high-flow turbine wheel, both designed to maximize exhaust efficiency and airflow. Each unit is finished with an upgraded bearing housing and undergoes rigorous VSR high-speed balancing to ensure the rotating assembly operates with precision and reliability under extreme boost pressures. Retaining the factory-style fitment, the Pure800 offers a stealthy installation that integrates perfectly with the stock manifold, though its internal capabilities far exceed those of the original equipment. It is designed to provide a broad power band that delivers aggressive top-end performance while maintaining the refined driving characteristics expected of a BMW. To safely unlock the massive potential of this turbocharger, custom tuning is required. This core-based upgrade remains a benchmark for B58 enthusiasts who want a proven, track-tested solution that delivers elite-level power figures without the need for a completely custom manifold setup.

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade w/ Installation Kit -...

With upgraded, 2.0" inlet snout to alleviate inlets popping off. For use with 2.0" inlet pipes.

T#:20749230

Part#: PUREN540004INSKT

Ships on Oct 12, 2026

$ 4,291.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,278.00 USD

Add to Wish List

Qty

$ 4,278.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Sometimes, you just have to send it! Pure Turbos have that exact idea for their Stage 2 "Hi-Flow" turbo upgrade. Designed to make your N54 powered BMW a monster on the street or track, this kit is designed to provide you with up to 700 reliable horsepower with supporting modifications. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available, the stock size of 1.81" (T#578217) or this package with 2.0" oversized inlets for use with oversized pipes. Features of this Pure Turbos upgraded OEM turbocharger: Upgraded billet compressor wheel Upgraded Hi-Flow turbine wheel Bullet-nosed nuts Upgraded wastegates Machined inlet snouts (no more inlet hoses popping off) VSR balanced to better than OE tolerances Featuring a limited 1 year warranty. Price includes a $600 core charge to be refunded once we receive your rebuildable cores.

Show More Show Less

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Injen SES Intercooler Charge Pipe - Polished Finish - G29 Z4, A90 MKV...

T#:26704953

Part#: SES2300ICP

In Stock at Vendor

$ 466.99 USD

Add to Wish List

Qty

$ 466.99 USD

Add to Wish List

Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.

Show More Show Less

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 RHD ...

T#:52270267

Part#: GCLRHDBLK

Ships in 10 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

For the N54 enthusiast who demands race-car power without sacrificing the daily-driver feel, the VTT GC-Lite 2.0 is the definitive choice.

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

T#:52270294

Part#: SILCPN54HKS2

Ships in 10 Business Days

$ 464.99 USD

Add to Wish List

Qty

$ 464.99 USD

Add to Wish List

Upgrade your N54’s breathing capabilities with the VTT Silicone Charge Pipe, specifically configured for enthusiasts running an HKS BOV.

Vargas GCMAX Turbocharger Upgrade Kit - BMW F8X S55

T#:51778127

Part#: VTT-S55-GCMAX

Ships in 10 Business Days

$ 5,249.99 USD

Add to Wish List

Qty

$ 5,249.99 USD

Add to Wish List

Vargas Turbo Technologies has completely overhauled the S55 turbocharger architecture with the GC-MAX kit, focusing on internal aerodynamics and thermal durability.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Turbocharger Coolant Supply Line - Cylinders 5-8

T#:7036589

Part#: 11537577013

Ships in 3 Business Days

$ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 335i ...

T#:52270256

Part#: GCLI335LHDBLK

Ships in 10 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The VTT N54 GC-Lite 2.0 is the solution for BMW 335i owners seeking a massive jump in power without sacrificing the rapid response of the factory setup.

Vargas GC Turbocharger Upgrade - BMW F9X M5, M8

T#:51672716

Part#: VTT-F90-GC

Ships in 10 Business Days

$ 5,519.99 USD

Add to Wish List

Qty

$ 5,519.99 USD

Add to Wish List

The Vargas Turbo Technologies "GC" (Game Changer) is a ground-up re-engineering of the BMW S63R turbocharger system.

Vargas Front Coolant Plug - BMW N54

T#:51778142

Part#: VTT-N54-FCP

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Vargas Front Coolant Plug is specifically engineered to provide a leak-free solution for blocking off the unused front water ports on the engine block.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Pure Turbos B58 Gen2 PURE600 Turbo Upgrade - Hi-Flow Inlet - A90/91 T...

T#:46719141

Part#: A90P600-HF

Ships in 4 Business Days

$ 1,343.99

This product was last offered at the strikethrough price on
07-15-2026

$ 1,295.00 USD

Add to Wish List

Qty

$ 1,295.00 USD

Add to Wish List

The A90/A91 Toyota Supra has been a popular platform to modify thanks to its great looks and BMW B58 engine. If you are looking to add power to your Supra, a turbo upgrade is one of the first major upgrades we recommend. With simple tuning, the factory turbo can easily be "woken up", but it quickly runs out of headroom before any major gains are realized. This PURE600 Turbo Upgrade from Pure Turbos is capable of supporting 550+ wheel horsepower with supporting modifications, such as fueling and methanol injection.

Show More Show Less

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

T#:52270293

Part#: SILCPN54HKS1

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Upgrade your BMW's intercooler piping with the Vargas Turbo Technologies Silicone Charge Pipe, the easiest-to-install N54 charge pipe on the market.

Turbo Oil Drain Line - Rear Turbo

T#:38161678

Part#: 11427562800

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
05-07-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Carries oil away from the rear turbocharger

BorgWarner Turbocharger W/ Exhaust Manifold - BMW F26 X4 N55 3.0L ...

T#:33180008

Part#: 11658663045

Ships in 1 Business Day

$ 4,139.99 USD

Add to Wish List

Qty

$ 4,139.99 USD

Add to Wish List

If your turbo is showing signs of failure, it is always best to go with an OEM brand for guaranteed quality. This replacement turbo from BorgWarner includes the integrated exhaust manifold and matches the turbocharger that was installed on your BMW from the factory. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". Note: This is a brand new unit, not a remanufactured one. No core charge!

Show More Show Less

BMW Turbocharger Gasket Set

T#:15412494

Part#: 527.270

In Stock at Vendor

$ 185.99

This product was last offered at the strikethrough price on
05-08-2026

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Replace your old turbo gaskets with new ones when doing an installation to ensure a tight seal and no chance of future leaks and issues!

BorgWarner Turbocharger With Exhaust Manifold - BMW B58D

T#:33446272

Part#: 11657934387

Ships in 1 Business Day

$ 3,782.99 USD

Add to Wish List

Qty

$ 3,782.99 USD

Add to Wish List

Replace your faulty turbo with a brand new BorgWarner turbocharger, engineered for optimal performance and reliability. Designed to meet or exceed OEM specifications, this turbocharger enhances engine efficiency, delivering improved power and torque across the RPM range when compared to your stock, worn-out turbo. Crafted with precision, it features a robust aluminum housing and a high-strength turbine wheel for superior durability and heat resistance. The advanced aerodynamics maximize airflow, ensuring quick spool-up and a responsive driving experience. Ideal for both daily drivers and performance enthusiasts, this turbocharger is a direct fit, making installation straightforward and hassle-free.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results