BMW Intake Parts for BMW F83 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Boost Cooler Stage 3 DI ProLine Water Injection
Boost Cooler Stage 3 DI ProLine Water Injection
SnowPerformance - Corporate Logo
T#:21308464
Part#: SP10317PRO
In Stock at Vendor
$ 833.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 833.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.
Show More Show Less
Water Methanol Controller (Boost) - VC-30
Water Methanol Controller (Boost) - VC-30
SnowPerformance - Corporate Logo
T#:21308475
Part#: SNO-60400
In Stock at Vendor
$ 184.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 184.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

  • Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
  • Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
  • Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
  • Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
  • Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.
Show More Show Less
Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit W/ 2.5 Gallon Tank. (Stainless Steel Braided Line, 4AN Fittings)
Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...
SnowPerformance - Corporate Logo
T#:21374123
Part#: SNO-211-BRD
In Stock at Vendor
$ 909.99 USD
Only available at this price
Add to Wish List
$ 909.99 USD
Only available at this price
Add to Wish List
14GPH Water-Methanol Nozzle
14GPH Water-Methanol Nozzle
SnowPerformance - Corporate Logo
T#:21374112
Part#: SNO-N1400
In Stock
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
AWE S-FLO Carbon Intake - BMW F80 M3, F82/83 M4 S55 3.0L
AWE S-FLO Carbon Intake - BMW F80 M3, F82/83 M4 S55 3.0L
AWE - Corporate Logo
T#:589739
Part#: 2660-13038
Ships in 4 Business Days
$ 1,684.99

This product was last offered at the strikethrough price on
04-02-2026

$ 1,485.00 USD
Only available at this price
Add to Wish List
$ 1,485.00 USD
Only available at this price
Add to Wish List
A Fully Enclosed Carbon Intake. The S-FLO Carbon Intake from AWE is a fully sealed and enclosed design constructed from a 2x2 twill carbon, made with High-Grade UV to protect from yellowing. The engineers at AWE have increased airflow and unlocked performance from the S55 engine, for max gains of 12hp and 10ft-lbs of torque at the crank
Show More Show Less
High Flow Water Methanol Check Valve
High Flow Water Methanol Check Valve
SnowPerformance - Corporate Logo
T#:2317849
Part#: SNO-8CV-QC
In Stock at Vendor
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...
SnowPerformance - Corporate Logo
T#:641841
Part#: 20010-BRD
In Stock at Vendor
$ 625.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 625.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

  • Precise injection control for improved performance
  • OEM-approved water methanol injection pump for durability
  • 100% methanol-resistant components for long-lasting use
  • Guaranteed leak-free operation with ACU-SEAL compression fittings
  • Increases induction charge density and fuel octane levels for full power
Show More Show Less
Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82 F83 - S55
Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...
Burger Motorsports - Corporate Logo
T#:5788180
Part#: BMS-F-S55HE
Ships on Sep 18, 2026
$ 599.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 599.00 USD
Only available at this price
Free Shipping
Add to Wish List
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N20 N54/55 S55 S63 B46/48 B58
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Sep 18, 2026
Starting at $ 226.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 226.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
Snow Performance Water Methanol Injection Nozzle - 7GPH
Snow Performance Water Methanol Injection Nozzle - 7GPH
SnowPerformance - Corporate Logo
T#:17040323
Part#: SNO-N0700
In Stock at Vendor
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)
Show More Show Less
Hobb's Switch
Hobb's Switch
Fuel-It! - Corporate Logo
T#:403482
Part#: ACC-HOBBS
Ships on Sep 18, 2026
$ 55.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 55.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
BMW S55 3.0L Silicone Charge pipes - Red
BMW S55 3.0L Silicone Charge pipes - Red
Vargas Turbo Technologies - Corporate Logo
T#:390442
Part#: VPP-S55-SIL-1R
Ships in 10 Business Days
$ 418.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 418.99 USD
Only available at this price
Free Shipping
Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

  • Eliminates restrictions for efficient turbocharger operation
  • Provides a full 2" ID from turbochargers to intercooler
  • Reduces potential heat soak with silicone construction
  • Durable design tested to over 150psi
  • Available in 3 color options: Black/Blue, Blue/Red, Red/Black
Show More Show Less
Water/Methanol Nozzle - 1.5GPH
Water/Methanol Nozzle - 1.5GPH
SnowPerformance - Corporate Logo
T#:21374121
Part#: SNO-N0150
In Stock
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Red High Temp Nylon Tubing - 20ft
Red High Temp Nylon Tubing - 20ft
SnowPerformance - Corporate Logo
T#:640586
Part#: SNO-8087
In Stock at Vendor
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow
Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow
SnowPerformance - Corporate Logo
T#:640584
Part#: SNO-809-BRD
In Stock at Vendor
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Burger Motorsports Performance Intake - F8X M3/M4 S55
Burger Motorsports Performance Intake - F8X M3/M4 S55
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556787
Part#: BMS-S55-INT
Ships on Sep 18, 2026
$ 479.00 USD
Only available at this price
Add to Wish List
$ 479.00 USD
Only available at this price
Add to Wish List
In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Show More Show Less
Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings
Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings
SnowPerformance - Corporate Logo
T#:598936
Part#: SNO-40040
In Stock
$ 41.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 41.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
CSF Performance Top Mount Aluminum Charge-Air-Cooler - Raw Finish - BMW S55 F8X M3 M4, F87 M2 Competition
CSF Performance Top Mount Aluminum Charge-Air-Cooler - Raw Finish - B...
CSF - Corporate Logo
T#:401241
Part#: 8082R
In Stock
$ 1,695.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 1,695.00 USD
Only available at this price
Free Shipping
Add to Wish List
CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design.
Show More Show Less
GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER
GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER
SnowPerformance - Corporate Logo
T#:586250
Part#: SNO-60300
In Stock at Vendor
$ 416.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 416.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55
Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55
CARB certified for sale in all 50 states
Mishimoto - Corporate Logo
T#:637358
Part#: MMICP-F80-15
EO#: D-759-13
In Stock at Vendor
$ 479.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 479.99 USD
Only available at this price
Free Shipping
Add to Wish List
Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Vargas Turbo Silicone Charge pipes - Blue - S55
Vargas Turbo Silicone Charge pipes - Blue - S55
Vargas Turbo Technologies - Corporate Logo
T#:390441
Part#: VPP-S55-SIL-1B
Ships in 10 Business Days
$ 418.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 418.99 USD
Only available at this price
Free Shipping
Add to Wish List
Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.
Show More Show Less
Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line
Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...
SnowPerformance - Corporate Logo
T#:21374131
Part#: SNO-40040-BRD
In Stock at Vendor
$ 62.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 62.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
MMX Performance Panel Air Filter Blue - S55/S63 (F-Chassis M cars)
MMX Performance Panel Air Filter Blue - S55/S63 (F-Chassis M cars) ...
Does not fit X5, X6, M8, or F90 M5
MMX Performance - Corporate Logo
T#:4538188
Part#: MMR01-1002
Ships in 2 Business Days
$ 141.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 141.99 USD
Only available at this price
Free Shipping
Add to Wish List
Replacement performance panel air filter for your S55 or S63 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable
Show More Show Less
82040R - Snow Performance Tee Adapter Fitting
82040R - Snow Performance Tee Adapter Fitting
SnowPerformance - Corporate Logo
T#:2317847
Part#: SNO-82040R
In Stock at Vendor
$ 23.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 23.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
1.25 Gallon Heavy-Duty Universal Methanol Tank
1.25 Gallon Heavy-Duty Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Sep 18, 2026
$ 69.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 69.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
S55 Front Mount Intake Kit
S55 Front Mount Intake Kit
RK Tunes - Corporate Logo
T#:25971900
Part#: S55INT
Back Ordered
Starting at $ 699.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 699.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
RK Tunes' S55 Front Mount Intakes are designed in-house utilizing high-quality 5-ply wire-reinforced silicone that can never suck shut. Featuring a full 3.5-inch design, this intake outflows all other aftermarket options. Increase performance and listen to those turbos flow! - Professional installation is recommended. - NO REMOVAL OF VBRACE. - NO BUMPER REMOVAL IS NEEDED.
Show More Show Less
Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit
Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...
SnowPerformance - Corporate Logo
T#:21308451
Part#: 40069-2
In Stock
$ 742.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 742.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Direct port injection plate with 1.5GPH nozzles for clean WMI installs ​Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning
Show More Show Less
High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings
High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings
SnowPerformance - Corporate Logo
T#:21308462
Part#: 40060-BRD
In Stock at Vendor
$ 73.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 73.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made
Show More Show Less
Stage 3 Boost Cooler (Direct Injection) - Braided Line
Stage 3 Boost Cooler (Direct Injection) - Braided Line
SnowPerformance - Corporate Logo
T#:14651267
Part#: SNO-320-BRD
In Stock at Vendor
$ 833.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 833.99 USD
Only available at this price
Free Shipping
Add to Wish List
Genuine BMW Intake Manifold - N20 2.0L
Genuine BMW Intake Manifold - N20 2.0L
Genuine BMW - Corporate Logo
T#:43430
Part#: 13717613156
Ships in 1-2 days
2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
2% off MSRP
$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List


Genuine BMW Intake Manifold, Front -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,S55

Show More Show Less
Genuine BMW F80 M3, F82 M4 Clean Air Pipe, Lower - 13717846272
Genuine BMW F80 M3, F82 M4 Clean Air Pipe, Lower - 13717846272 ...
Genuine BMW - Corporate Logo
T#:194764
Part#: 13717846272
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Only available at this price
Free Shipping
Add to Wish List
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Only available at this price
Free Shipping
Add to Wish List


Genuine BMW Clean Air Pipe, Lower - Zyl. 4-6
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW Mass Air Flow Sensor (MAF)
Genuine BMW Mass Air Flow Sensor (MAF)
Genuine BMW - Corporate Logo
T#:42664
Part#: 13627602038
Ships in 1-2 days
22% off MSRP $ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD
Only available at this price
Free Shipping
Add to Wish List
22% off MSRP
$ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD
Only available at this price
Free Shipping
Add to Wish List


Genuine BMW Hot-Film Air Mass Meter -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,S55,S63N

Show More Show Less
Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L
Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L ...
Genuine BMW - Corporate Logo
T#:34987
Part#: 11417516128
In Stock
3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
3% off MSRP
$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List


Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less
Carbon Fiber Intercooler Cover With Engraved Design - S55
Carbon Fiber Intercooler Cover With Engraved Design - S55
Carbonex - Corporate Logo
T#:5567058
Part#: S55COVERWLOGO
Ships in 4 Business Days
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
This version features S55 3.0L Bi-Turbo engraved into the cover. This carbon fiber intercooler cover is made from premium prepreg carbon fiber, cured using vacuum bag and autoclave
High Flow Water Methanol Check Valve (Nylon Line)
High Flow Water Methanol Check Valve (Nylon Line)
SnowPerformance - Corporate Logo
T#:21374130
Part#: SNO-8CV
Ships in 6 Business Days
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:5886935
Part#: 19.12.11XBLK
Ships in 8 Business Days
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:4662381
Part#: 19.12.11X
Ships in 8 Business Days
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 125.00 USD
Only available at this price
Free Shipping
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:5886934
Part#: 19.12.11XBLU
Ships in 8 Business Days
$ 125.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 125.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:5886933
Part#: 19.12.11XYEL
Ships in 8 Business Days
$ 125.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 125.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
DO88 Intake System - F8X M2C/M3/M4
DO88 Intake System - F8X M2C/M3/M4
DO88 - Corporate Logo
T#:13891859
Part#: LF150SS
Ships on Sep 22, 2026
$ 1,246.99 USD
Only available at this price
Add to Wish List
$ 1,246.99 USD
Only available at this price
Add to Wish List
DO88's F8X intake is designed to pull cold air straight out from the front of the vehicle. This is because when the air filter is open in the engine, it allows the engine to pull warm air from the engine straight into the intake, causing a loss in power compared to cold air. The enclosed design with rubber gaskets allows you to make sure there are no leaks and that only the freshest of air is reaching your engine. With this upgrade, you could see up to +10 peak hp gain and 20+hp in mid-range rpm!
Show More Show Less
DO88 Intercooler J-Pipe - F8X M2C/M3/M4
DO88 Intercooler J-Pipe - F8X M2C/M3/M4
DO88 - Corporate Logo
T#:13891821
Part#: TR250S
In Stock at Vendor
$ 207.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 207.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
A common issue on S55 engines is when the plastic OE j-pipe cracks leading to boost leaks. DO88 saw this issue and designed a new metal j-pipe to take its place. Having 3D scanned the engine bay of an M3C, the team at DO88 was able to precisely see how much room they had to work with to get a perfect fit. This allowed them to expand the pipe from 85mm to 89mm in diameter, getting better airflow to the throttle body. This j-pipe kit will be the perfect reliable upgrade to your S55's intake system!
Show More Show Less
DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Hybrid Turbo 54mm
DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Hybrid Turbo 54mm
DO88 - Corporate Logo
T#:13924840
Part#: DO88KIT205SID54
Ships on Sep 22, 2026
$ 472.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 472.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Boasting a 33% larger flow area, this inlet pipe will let your engine breathe better than ever before! Designed to reduce backpressure, this lets the turbo take in more air giving you more power and better performance!
Show More Show Less
BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos
BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos ...
DO88 - Corporate Logo
T#:13924836
Part#: DO88KIT205SOEM
Ships on Sep 22, 2026
$ 472.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 472.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List

BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos is engineered to enhance your vehicle's performance by providing a 33% larger flow area compared to the stock inlet pipe. This design allows the engine to breathe more efficiently, reducing backpressure and enabling the turbo to intake more air. The result is increased power and improved overall performance.

  • Increased Flow: 33% larger flow area for superior air intake.
  • Enhanced Performance: Reduces backpressure, allowing the turbo to operate more efficiently.
  • Improved Power: More air intake translates to better engine power and responsiveness.
  • Precision Engineering: Designed specifically for BMW F8X M2C/M3/M4 models with stock turbos.
  • Easy Installation: Direct fitment for a hassle-free upgrade.

Upgrade to the DO88 Turbo Inlet Pipe for significant performance gains and a more responsive driving experience.

Show More Show Less
Billet 100 Micron Water Methanol Filter
Billet 100 Micron Water Methanol Filter
SnowPerformance - Corporate Logo
T#:21374114
Part#: SNO-38FIL
Special Order: No Guaranteed ETA
$ 61.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 61.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Black High Temp Nylon Water Methanol Tubing - 20'
Black High Temp Nylon Water Methanol Tubing - 20'
SnowPerformance - Corporate Logo
T#:20815165
Part#: SNO-80088
Special Order: No Guaranteed ETA
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
Snow Performance 20' Bag High Temp Nylon Water Methanol Tubing 100% Methanol Resistant 800 PSI Burst Rating Black
Forge Motorsport Valve Service Kit
Forge Motorsport Valve Service Kit
Forge - Corporate Logo
T#:28271173
Part#: FMDV004S
Back Ordered
$ 23.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 23.99 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
MST Performance Air Intake System - F8X S55
MST Performance Air Intake System - F8X S55
MST Performance - Corporate Logo
T#:585588
Part#: BW-M3401
Special Order: No Guaranteed ETA
$ 743.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 743.99 USD
Only available at this price
Free Shipping
Add to Wish List
Upgrade your stock S55 intake to the MST Performance intake system. By replacing the factory air intake systems, airflow is increased and overall temperatures are reduced. This intake features a unique design to allow for improved throttle response as well as an improved engine note. This intake system utilizes a heat shield that will help block the hot engine air, allowing the intake to deliver cooler, denser air. It includes all of the necessary hardware for install, making it a smooth and swift process. Also included is a 3" intake pipe. Maximizes airflow to engine Heat shield helps block hot engine air More aggressive and sporty induction sound Washable and reusable lifetime air filter Provides gains of 10-13 horsepower
Show More Show Less
FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition
FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...
FTP Motorsport - Corporate Logo
T#:578679
Part#: SG71350
Ships on Nov 9, 2026
$ 470.00 USD
Only available at this price
Free Shipping
Add to Wish List
$ 470.00 USD
Only available at this price
Free Shipping
Add to Wish List
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less
FTP M-Power High Flow Air Filter - S55 F8x/S63 F1x
FTP M-Power High Flow Air Filter - S55 F8x/S63 F1x
FTP Motorsport - Corporate Logo
T#:5788173
Part#: GS55S63
Special Order: No Guaranteed ETA
$ 130.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
$ 130.00 USD
Only available at this price
Free Shipping on orders $49 and up
Add to Wish List
FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow
Show More Show Less
VRSF High Flow Upgraded Air Intake Kit - S55
VRSF High Flow Upgraded Air Intake Kit - S55
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585202
Part#: 10801010
Back Ordered
$ 279.99 USD
Only available at this price
Free Shipping
Add to Wish List
$ 279.99 USD
Only available at this price
Free Shipping
Add to Wish List
This high flow upgraded air intake kit from VRSF replaces the restrictive OEM intake with a high flowing design. This design retains the OEM cold air ducting, and eliminates the upper portion of the OEM intake. This portion is very restrictive, especially in high RPM ranges. The high flow filter is cleanable and creates a more aggressive intake sound. The kit includes all of the hardware for installation, including couplers, clamps, and filters.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping