Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.
Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.
For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.
Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:
Please note that the ethanol sensor is not included with this harness.
BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.
Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x11.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 23.35 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
Silver 18x9.5" ET22 Concave APEX ARC-8 Wheel.
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):22
Weight (lbs):19.2
Profile:Concave
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.
Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!
Price is per wheel.
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 21.7 |
| Profile: | 2, moderate dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 21.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 21.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 27 |
| Weight (lbs): | 22.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.9 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 33 |
| Weight (lbs): | 20.5 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 20.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 23.9 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 20.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 23.5 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 17x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 16.95 |
| Profile: | Concave |
APEX EC-7 18" Staggered Wheel Set -- 18x8.5" / 18x9.5"
This set of 8.5" and 9.5" ARC-8 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use an 8.5" ET35 on the front and a 9.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper curve to the spokes than the front wheels, emphasizing the RWD chassis and adding some muscularity to the stance.
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 22.45 |
| Profile: | 3, deep dish |