BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

T#:16175682

Part#: BMSS55INT

Ships on Sep 18, 2026

$ 349.00 USD

Only available at this price

Add to Wish List

Qty

$ 349.00 USD

Only available at this price

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

BMW F8X S55 CTS Turbo Chargepipe

T#:584988

Part#: CTS-IT-288

Ships in 7 Business Days

$ 329.99 USD

Only available at this price

Add to Wish List

Qty

$ 329.99 USD

Only available at this price

Add to Wish List

The factory S55 chargepipe is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

BLACKLINE Performance ChargeCooler Cover - S55 F8x M2 Comp/M3/M4 - (N...

T#:4662389

Part#: S55CCC

No longer available

Give your plain factory charge cooler an upgrade with the BLACKLINE Performance ChargeCooler Cover. Complete the look of your engine bay with this simple yet elegant upgrade giving your engine bay the finishing touch it deserves. Each kit includes ChargeCooler Cover and an installation instruction card. Finished in a sleek satin black anodized finish. Constructed from 1.5mm thick T5 aluminum, featuring Goldenwrench's Tri-Fin design and laser cut BLACKLINE logo and classic G insignia. *Note: Fits only S55 engine equipped vehicles: M2 Competition, F80 M3, and F82/F83 M4

Show More Show Less

Boost Cooler Stage 3 DI ProLine Water Injection

T#:21308464

Part#: SP10317PRO

In Stock at Vendor

$ 833.99 USD

Only available at this price

Add to Wish List

Qty

$ 833.99 USD

Only available at this price

Add to Wish List

The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Show More Show Less

Water Methanol Controller (Boost) - VC-30

T#:21308475

Part#: SNO-60400

In Stock at Vendor

$ 184.99 USD

Only available at this price

Add to Wish List

Qty

$ 184.99 USD

Only available at this price

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

CSF Performance Top Mount Aluminum Charge-Air-Cooler - Raw Finish - B...

T#:401241

Part#: 8082R

In Stock

$ 1,695.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,695.00 USD

Only available at this price

Add to Wish List

CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design.

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Only available at this price

Add to Wish List

Qty

$ 909.99 USD

Only available at this price

Add to Wish List

Color Matched Charge Pipe Kit - Yas Marina Blue

T#:7640385

Part#: MMICP-F80-15CYMB

In Stock at Vendor

$ 495.99 USD

Only available at this price

Add to Wish List

Qty

$ 495.99 USD

Only available at this price

Add to Wish List

Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.

Show More Show Less

Dinan Carbon Fiber Intake System - F8X M3/M4

Call In Or Chat For Best Price!

T#:389284

Part#: D760-0045

Back Ordered

11% off MSRP $ 1,912.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,699.99 USD

Only available at this price

Add to Wish List

Qty

11% off MSRP

$ 1,912.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,699.99 USD

Only available at this price

Add to Wish List

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airboxes complete with larger cone filters that elicit a slightly more audible and sporty tone over its stock counterpart.

Show More Show Less

14GPH Water-Methanol Nozzle

T#:21374112

Part#: SNO-N1400

In Stock

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

$ 31.99 USD

Only available at this price

Add to Wish List

High Flow Water Methanol Check Valve

T#:2317849

Part#: SNO-8CV-QC

In Stock at Vendor

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

$ 31.99 USD

Only available at this price

Add to Wish List

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Only available at this price

Add to Wish List

Qty

$ 625.00 USD

Only available at this price

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

BMW F8X S55 3.0l Intercooler Pipes DO88

T#:13891829

Part#: TR240SS

In Stock at Vendor

$ 446.99 USD

Only available at this price

Add to Wish List

Qty

$ 446.99 USD

Only available at this price

Add to Wish List

BMW F8X S55 3.0L Intercooler Pipes DO88 are engineered to deliver exceptional performance and reliability for your S55 engine. Designed and tested rigorously by DO88, these intercooler pipes ensure optimal airflow and durability, enhancing your vehicle's breathing efficiency.

Enhanced Airflow: Provides 4% increased airflow compared to stock pipes, improving engine performance.
OE Engine Cover Compatibility: Allows for seamless installation with the OE engine cover.
High-Temperature Resistance: Built to withstand high temperatures and pressures, ensuring long-lasting reliability.
Top-Quality Construction: Manufactured by DO88, known for premium aftermarket components.

Upgrade your BMW F8X S55 with the DO88 intercooler pipes for superior performance and peace of mind.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 18, 2026

Starting at $ 226.99 USD

Only available at this price

Add to Wish List

Starting at $ 226.99 USD

Only available at this price

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

$ 31.99 USD

Only available at this price

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

Hobb's Switch

T#:403482

Part#: ACC-HOBBS

Ships on Sep 18, 2026

$ 55.00 USD

Only available at this price

Add to Wish List

Qty

$ 55.00 USD

Only available at this price

Add to Wish List

BMW S55 3.0L Silicone Charge pipes - Red

T#:390442

Part#: VPP-S55-SIL-1R

Ships in 10 Business Days

$ 418.99 USD

Only available at this price

Add to Wish List

Qty

$ 418.99 USD

Only available at this price

Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

Eliminates restrictions for efficient turbocharger operation
Provides a full 2" ID from turbochargers to intercooler
Reduces potential heat soak with silicone construction
Durable design tested to over 150psi
Available in 3 color options: Black/Blue, Blue/Red, Red/Black

Show More Show Less

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

$ 31.99 USD

Only available at this price

Add to Wish List

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Only available at this price

Add to Wish List

Qty

$ 20.99 USD

Only available at this price

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock at Vendor

$ 20.99 USD

Only available at this price

Add to Wish List

Qty

$ 20.99 USD

Only available at this price

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Only available at this price

Add to Wish List

Qty

$ 41.99 USD

Only available at this price

Add to Wish List

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Sep 18, 2026

$ 599.00 USD

Only available at this price

Add to Wish List

Qty

$ 599.00 USD

Only available at this price

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

AWE S-FLO Carbon Intake - BMW F80 M3, F82/83 M4 S55 3.0L

T#:589739

Part#: 2660-13038

Ships in 4 Business Days

$ 1,684.99

This product was last offered at the strikethrough price on
04-02-2026

$ 1,485.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,485.00 USD

Only available at this price

Add to Wish List

A Fully Enclosed Carbon Intake. The S-FLO Carbon Intake from AWE is a fully sealed and enclosed design constructed from a 2x2 twill carbon, made with High-Grade UV to protect from yellowing. The engineers at AWE have increased airflow and unlocked performance from the S55 engine, for max gains of 12hp and 10ft-lbs of torque at the crank

Show More Show Less

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

In Stock at Vendor

$ 416.99 USD

Only available at this price

Add to Wish List

Qty

$ 416.99 USD

Only available at this price

Add to Wish List

3 Gallon F3x/F8x Stealth Tank

T#:558169

Part#: 3G-STMT-F3XF8X

Ships on Sep 18, 2026

$ 229.00 USD

Only available at this price

Add to Wish List

Qty

$ 229.00 USD

Only available at this price

Add to Wish List

Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"

Show More Show Less

Vargas Turbo Silicone Charge pipes - Blue - S55

T#:390441

Part#: VPP-S55-SIL-1B

Ships in 10 Business Days

$ 418.99 USD

Only available at this price

Add to Wish List

Qty

$ 418.99 USD

Only available at this price

Add to Wish List

Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.

Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

CARB certified for sale in all 50 states

T#:637358

Part#: MMICP-F80-15

EO#: D-759-13

In Stock at Vendor

$ 479.99 USD

Only available at this price

Add to Wish List

Qty

$ 479.99 USD

Only available at this price

Add to Wish List

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Only available at this price

Add to Wish List

Qty

$ 62.99 USD

Only available at this price

Add to Wish List

MMX Performance Panel Air Filter Blue - S55/S63 (F-Chassis M cars) ...

Does not fit X5, X6, M8, or F90 M5

T#:4538188

Part#: MMR01-1002

Ships in 2 Business Days

$ 141.99 USD

Only available at this price

Add to Wish List

Qty

$ 141.99 USD

Only available at this price

Add to Wish List

Replacement performance panel air filter for your S55 or S63 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable

Show More Show Less

82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Only available at this price

Add to Wish List

Qty

$ 23.99 USD

Only available at this price

Add to Wish List

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 18, 2026

$ 69.00 USD

Only available at this price

Add to Wish List

Qty

$ 69.00 USD

Only available at this price

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...

T#:21308451

Part#: 40069-2

In Stock

$ 742.99 USD

Only available at this price

Add to Wish List

Qty

$ 742.99 USD

Only available at this price

Add to Wish List

Direct port injection plate with 1.5GPH nozzles for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Only available at this price

Add to Wish List

Qty

$ 73.00 USD

Only available at this price

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

S55 Front Mount Intake Kit

T#:25971900

Part#: S55INT

Back Ordered

Starting at $ 699.99 USD

Only available at this price

Add to Wish List

Starting at $ 699.99 USD

Only available at this price

Add to Wish List

RK Tunes' S55 Front Mount Intakes are designed in-house utilizing high-quality 5-ply wire-reinforced silicone that can never suck shut. Featuring a full 3.5-inch design, this intake outflows all other aftermarket options. Increase performance and listen to those turbos flow! - Professional installation is recommended. - NO REMOVAL OF VBRACE. - NO BUMPER REMOVAL IS NEEDED.

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Only available at this price

Add to Wish List

Qty

$ 833.99 USD

Only available at this price

Add to Wish List

Genuine BMW F80 M3, F82 M4 Clean Air Pipe, Lower - 13717846272 ...

T#:194764

Part#: 13717846272

In Stock

2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Only available at this price

Add to Wish List

Qty

2% off MSRP

$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Only available at this price

Add to Wish List

Genuine BMW Clean Air Pipe, Lower - Zyl. 4-6
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW Mass Air Flow Sensor (MAF)

T#:42664

Part#: 13627602038

Ships in 1 day

22% off MSRP $ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD

Only available at this price

Add to Wish List

Qty

22% off MSRP

$ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD

Only available at this price

Add to Wish List

Genuine BMW Hot-Film Air Mass Meter -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,S55,S63N

Show More Show Less

Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L ...

T#:34987

Part#: 11417516128

In Stock

3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

3% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Only available at this price

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Intake Manifold - N20 2.0L

T#:43430

Part#: 13717613156

Ships in 1 day

2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Only available at this price

Add to Wish List

Qty

2% off MSRP

$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Only available at this price

Add to Wish List

Genuine BMW Intake Manifold, Front -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,S55

Show More Show Less

Carbon Fiber Intercooler Cover With Engraved Design - S55

T#:5567058

Part#: S55COVERWLOGO

Ships in 3 Business Days

$ 125.00 USD

Only available at this price

Add to Wish List

Qty

$ 125.00 USD

Only available at this price

Add to Wish List

This version features S55 3.0L Bi-Turbo engraved into the cover. This carbon fiber intercooler cover is made from premium prepreg carbon fiber, cured using vacuum bag and autoclave

High Flow Water Methanol Check Valve (Nylon Line)

T#:21374130

Part#: SNO-8CV

Ships in 6 Business Days

$ 31.99 USD

Only available at this price

Add to Wish List

Qty

$ 31.99 USD

Only available at this price

Add to Wish List

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

T#:5886935

Part#: 19.12.11XBLK

Ships in 8 Business Days

$ 125.00 USD

Only available at this price

Add to Wish List

Qty

$ 125.00 USD

Only available at this price

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

T#:4662381

Part#: 19.12.11X

Ships in 8 Business Days

$ 125.00 USD

Only available at this price

Add to Wish List

Qty

$ 125.00 USD

Only available at this price

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4

T#:5886933

Part#: 19.12.11XYEL

Ships in 8 Business Days

$ 125.00 USD

Only available at this price

Add to Wish List

Qty

$ 125.00 USD

Only available at this price

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4

T#:5886934

Part#: 19.12.11XBLU

Ships in 8 Business Days

$ 125.00 USD

Only available at this price

Add to Wish List

Qty

$ 125.00 USD

Only available at this price

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

DO88 Intake System - F8X M2C/M3/M4

T#:13891859

Part#: LF150SS

Ships on Sep 22, 2026

$ 1,246.99 USD

Only available at this price

Add to Wish List

Qty

$ 1,246.99 USD

Only available at this price

Add to Wish List

DO88's F8X intake is designed to pull cold air straight out from the front of the vehicle. This is because when the air filter is open in the engine, it allows the engine to pull warm air from the engine straight into the intake, causing a loss in power compared to cold air. The enclosed design with rubber gaskets allows you to make sure there are no leaks and that only the freshest of air is reaching your engine. With this upgrade, you could see up to +10 peak hp gain and 20+hp in mid-range rpm!

Show More Show Less

DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Hybrid Turbo 54mm

T#:13924840

Part#: DO88KIT205SID54

Ships on Sep 22, 2026

$ 472.99 USD

Only available at this price

Add to Wish List

Qty

$ 472.99 USD

Only available at this price

Add to Wish List

Boasting a 33% larger flow area, this inlet pipe will let your engine breathe better than ever before! Designed to reduce backpressure, this lets the turbo take in more air giving you more power and better performance!

Show More Show Less

DO88 Intercooler J-Pipe - F8X M2C/M3/M4

T#:13891821

Part#: TR250S

In Stock at Vendor

$ 207.99 USD

Only available at this price

Add to Wish List

Qty

$ 207.99 USD

Only available at this price

Add to Wish List

A common issue on S55 engines is when the plastic OE j-pipe cracks leading to boost leaks. DO88 saw this issue and designed a new metal j-pipe to take its place. Having 3D scanned the engine bay of an M3C, the team at DO88 was able to precisely see how much room they had to work with to get a perfect fit. This allowed them to expand the pipe from 85mm to 89mm in diameter, getting better airflow to the throttle body. This j-pipe kit will be the perfect reliable upgrade to your S55's intake system!

Show More Show Less

BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos ...

T#:13924836

Part#: DO88KIT205SOEM

Ships on Sep 22, 2026

$ 472.99 USD

Only available at this price

Add to Wish List

Qty

$ 472.99 USD

Only available at this price

Add to Wish List

BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos is engineered to enhance your vehicle's performance by providing a 33% larger flow area compared to the stock inlet pipe. This design allows the engine to breathe more efficiently, reducing backpressure and enabling the turbo to intake more air. The result is increased power and improved overall performance.

Increased Flow: 33% larger flow area for superior air intake.
Enhanced Performance: Reduces backpressure, allowing the turbo to operate more efficiently.
Improved Power: More air intake translates to better engine power and responsiveness.
Precision Engineering: Designed specifically for BMW F8X M2C/M3/M4 models with stock turbos.
Easy Installation: Direct fitment for a hassle-free upgrade.

Upgrade to the DO88 Turbo Inlet Pipe for significant performance gains and a more responsive driving experience.

Show More Show Less

Billet 100 Micron Water Methanol Filter

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Only available at this price

Add to Wish List

Qty

$ 61.99 USD

Only available at this price

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F82 M4 S55 3.0L

Sub-Categories

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results