BMW Drivetrain Parts for BMW F82 M4 S55 3.0L

Upgrade your drivetrain performance with ECS Tuning Performance Polyurethane Differential Bushings—engineered specifically for BMW F8x/G8x models and designed to deliver superior power transfer, durability, and driving precision.

Factory rubber differential bushings are built for comfort, absorbing vibrations between the differential and chassis during everyday driving. However, they are a known wear item that degrade over time—especially under spirited or aggressive driving conditions. Many F8x/G8x owners experience premature cracking and wear, leading to excessive drivetrain movement, reduced throttle response, and unwanted wheel hop.

ECS Tuning’s in-house engineered polyurethane differential bushings provide a high-performance solution to these common issues. By significantly reducing drivetrain deflection, these upgraded bushings enhance throttle response, improve handling stability, and minimize wheel hop—resulting in a more connected and controlled driving experience.

Constructed from durable 95A durometer red polyurethane and paired with precision CNC-machined 6061-T6 aluminum sleeves, these bushings are built to withstand extreme driveline forces while maintaining street-friendly comfort. Unlike solid or delrin mounts, ECS polyurethane bushings strike the perfect balance between performance and daily drivability—delivering increased rigidity without excessive noise, vibration, or harshness (NVH).

Whether you're carving canyon roads, launching at the drag strip, or simply commuting, these performance differential bushings ensure more efficient power delivery from the differential to the wheels—giving you better throttle modulation, traction, and overall control.

Key Features & Benefits:

Performance polyurethane differential bushings for BMW F8X models
Reduces drivetrain movement and improves power transfer
Enhances throttle response and minimizes wheel hop
95A durometer polyurethane for optimal balance of performance and comfort
CNC-machined 6061-T6 aluminum inserts with Type II black anodizing for corrosion resistance
Resistant to oil, chemicals, ozone, and road salt for extended service life
Designed to handle high torque loads and extreme driving conditions
Engineered using real-world load data and worst-case operating scenarios
Maintains street-friendly NVH levels compared to solid mounts
Replace worn factory bushings with ECS Performance Polyurethane Differential Bushings and experience tighter handling, improved drivetrain response, and long-lasting reliability.

Eliminate the factory clutch delay valve and enjoy faster, more precise clutch engagement with the ECS Clutch Delay Valve (CDV) Removal Tool Kit. Designed for F and G-Chassis manual BMWs, this kit makes removing the hydraulic restrictor safe, simple, and reliable, no slave cylinder removal required.

Most modern BMWs come from the factory with a plastic slave cylinder featuring a CDV, intended to smooth engagement and reduce driveline shock for less experienced drivers. In practice, this restrictor can dull pedal feedback, slow shifts, and increase clutch wear. Removing it restores the sharp, direct clutch feel that BMW enthusiasts expect.

Key Benefits:

Faster, more predictable clutch engagement
Sharper pedal response and connected driving feel
No need to remove the slave cylinder
Tool Design:

Machined from durable 304 stainless steel
Includes precision removal and insertion tools
Knurled grip for easy handling
Built-in depth and angle control protects internal surfaces and ensures proper grommet alignment
Removal and Installation:

Disconnect the Clutch Line
Remove the clutch line from the slave cylinder to access the factory clutch delay valve.
Remove the Restrictor Plate
Thread the removal tool into the center of the small grommet. Once engaged, carefully pull the tool to remove the grommet and restrictor plate. The small rubber sealing O-ring will come out along with the plate.
Reinstall the O-Ring
Place the rubber O-ring onto the installation tool. Insert the tool into the slave cylinder to properly seat the O-ring in its original position.
Reconnect and Bleed the Clutch
Reattach the clutch line, add fluid, and bleed the system according to your manufacturer’s instructions.
Enjoy Enhanced Clutch Feel
With the delay valve removed, your clutch now engages faster and more predictably, giving your manual transmission the sharp, connected feel it was designed for.

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Turner Motorsport BMW Shifter Revitalization Kit

Restore your BMW's shifter to its former precision with Turner Motorsport's top-notch replacement kit. Over time, most BMW shifters lose their original feel due to inferior rubber bushings. These bushings introduce excessive movement in the shift lever, resulting in a shifter that lacks precision.

Introducing Turner Motorsport's solution - a direct-fit, high-strength Teflon bushing. Meticulously crafted from pure Teflon rod, free from any impurities or fillers, these bushings promise extended durability. By eliminating side-to-side play in the shifter rod, they notably enhance the performance of even the stock shifter.

Kit Includes:

• 4 Teflon Bushing Inserts
• 2 Carrier Pins

Elevate your BMW's shifting experience with Turner Motorsport's precision-designed replacement kit.