KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...

For Vehicles produced before 01/15 production date with EDC

T#:206127

Part#: 352208AN

In Stock

$ 5,294.00 USD

Add to Wish List

Qty

$ 5,294.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track. KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times. Performance setup for the racetrack Height adjustable coilovers - Front - 15-40mm, Rear - 20-45mm Dampers in compression & rebound forces independently adjustable Use of high performance linear race springs: Front 575 lbs/inch, Rear 800 lbs/inch. Stainless steel technology "inox-line" Includes front camber plate mounts Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. EDC must be disabled using the KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC. Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below. KW Clubsport Development and Testing This item fits the following BMWs: 2015-1/2015 F80 BMW M3 2015-1/2015 F82 BMW M4

Show More Show Less

KW V4 Series Coilover Kit - F80, F82 W/EDC

For production dates before 01/2015, with 3 bolt front top mount

T#:587694

Part#: 3A7200APKT1

Back Ordered

$ 7,574.00 USD

Add to Wish List

Qty

$ 7,574.00 USD

Add to Wish List

Developed exclusively for super sports cars, sports cars and performance sedans, V4 coilovers are the ultimate in coilover technology featuring 3-way adjustable dampening and leading race technology for the highest street and track coilovers available.

Show More Show Less

3S Air Management System With P3 Controller

T#:22591957

Part#: 27718

Back Ordered

$ 1,045.00 USD

Add to Wish List

Qty

$ 1,045.00 USD

Add to Wish List

Introducing the Air Lift Performance 3S Air Management Kit

The Air Lift Performance 3S is a groundbreaking air management kit that takes performance to the next level. This kit includes a manifold and a basic wiring harness, providing the flexibility to be installed in conjunction with separately purchased components. It is compatible with both 1/4” and 3/8” air lines, offering various kit versions to cater to different displays and switch boxes or exclusive use with the ALP3 app. Whichever version you choose, seamless integration with the ALP3 app is guaranteed.

Components to be purchased separately include:

Air springs
Water trap
Controllers (e.g., AVS switchbox)
Fittings/air lines
Compressor
Insulated copper wires in 10-, 12-, 18-, and 20-gauge
Tank wire, connectors, terminals, butt splices
Pressure switch fuse/holders
Relay
Schrader valve and blow-off valve

Additionally, there are versions of the 3S kit available with the Air Lift Performance V2 or ALP3 controller or just the smartphone app for added convenience.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:4347104

Part#: I-49-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

KW V4 Series Coilover Kit - F80 M3, F82 M4 (W/O EDC)

For production date from 01/2015+ with 5 bolt front top mount

T#:587683

Part#: 3A7200BB

Back Ordered

$ 6,014.00 USD

Add to Wish List

Qty

$ 6,014.00 USD

Add to Wish List

**ONLY FOR VEHICLES WITH STANDARD SUSPENSION (WITHOUT EDC/ADAPTIVE SUSPENSION)** The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day to day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Spring Rate of 285lbs/inch Front and 685lbs/inch Rear.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439436

Part#: I-49-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

KW Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount

T#:338398

Part#: TMS338398

In Stock

Starting at $ 5,294.00 USD

Add to Wish List

Starting at $ 5,294.00 USD

Add to Wish List

KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F82 M4 S55 3.0L

Sub-Categories

KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...

KW V4 Series Coilover Kit - F80, F82 W/EDC

3S Air Management System With P3 Controller

Introducing the Air Lift Performance 3S Air Management Kit

Components to be purchased separately include:

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

KW V4 Series Coilover Kit - F80 M3, F82 M4 (W/O EDC)

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

KW Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results