Schwaben 3-Liter European Pressure Brake Bleeder with Catch Bottle ...

T#:26504945

Part#: 007237SCH01A02KT

Ships on Sep 25, 2026

Sale - Save 17% $ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD

Add to Wish List

Qty

Sale - Save 17%

$ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD

Add to Wish List

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

Holds a full 3-Liters (3.17 qts) of brake fluid
Easy to read 0-30 lbs pressure gauge built into the tank top
Pressure relief valve for safe release of pressure
40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

Do not exceed 20 PSI
LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Hawk HPS 5.0 Front And Rear Brake Pad Kit - F8X F22/23 F3X

For vehicles without M Carbon ceramic brakes

T#:553106

Part#: HB765B.664KT

In Stock

$ 344.99

This product was last offered at the strikethrough price on
04-27-2026

$ 342.99 USD

Add to Wish List

Qty

$ 342.99 USD

Add to Wish List

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving.

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - F80/F8...

T#:583488

Part#: 022761TMS09

In Stock

Sale - Save 5% $ 219.99

This product was last offered at the strikethrough price on
06-14-2026

$ 208.98 USD

Add to Wish List

Qty

Sale - Save 5%

$ 219.99

This product was last offered at the strikethrough price on
06-14-2026

$ 208.98 USD

Add to Wish List

Factory rubber brake lines can expand under pressure, requiring more fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under pressure. This expansion is even more prominent in aged and weathered rubber hoses. Turner Motorsport Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

Show More Show Less

Hawk Front HPS 5.0 Performance Brake Pad Set - F8X M3/4, F3X, F22/23 ...

For vehicles without carbon ceramic brakes

T#:394350

Part#: HB765B.664

In Stock

$ 189.89 USD

Add to Wish List

Qty

$ 189.89 USD

Add to Wish List

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving.

Show More Show Less

Turner Stainless Steel Brake Lines - Front - F2x/F3x/F8x/G80/G82 ...

T#:582993

Part#: 022760TMS01

In Stock

$ 116.39 USD

Add to Wish List

Qty

$ 116.39 USD

Add to Wish List

Even when brand new, factory rubber brake hoses expand under pressure, requiring increased fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under the high pressure. This expansion is even more prominent in old and weathered rubber hoses. Turner Motorsport Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh core and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

Show More Show Less

EBC RedStuff Performance Brake Pad Set - Rear - BMW F8X F3X 3-Series ...

For vehicles without carbon ceramic brakes

T#:392065

Part#: DP32133C

Ships in 1 Business Day

5% off MSRP $ 235.02

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.27 USD

Add to Wish List

Qty

5% off MSRP

$ 235.02

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.27 USD

Add to Wish List

Redstuff ceramic brake pads have always been known for their low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.

Show More Show Less

EBC RedStuff Performance Brake Pad Set - Front

For vehicles without carbon ceramic brakes

T#:587606

Part#: DP32360C

In Stock

5% off MSRP $ 298.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.10 USD

Add to Wish List

Qty

5% off MSRP

$ 298.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.10 USD

Add to Wish List

EBC Redstuff brake pads are designed for high performance models that are driven aggressively on the street. Featuring a low dusting compound, that offers stopping power even when your brake discs are cold. EBC Redstuff pads are comprised of a ceramic particle-enhanced Kevlar-fiber based braking compound. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, brakes better and is overall quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their brake rotor. This is a truly impressive fast road pad for repeated heavy braking.

Show More Show Less

Brembo Rear Brake Pad Set - F22, F23, F30, F31, F32, F33, F34, F36 ...

5X Entries For Our G87 M2 Sweepstakes!

T#:638031

Part#: 34216887576

In Stock

29% off MSRP $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD

Add to Wish List

Qty

29% off MSRP

$ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD

Add to Wish List

Quality aftermarket brake pads. A premium ceramic alternative!

ECS Front V5 Drilled Brake Rotors - Set (380x30)

For vehicles without M Carbon ceramic brakes

T#:17738288

Part#: 34112284809-X

In Stock

Sale - Save 5% $ 501.99

This product was last offered at the strikethrough price on
06-14-2026

$ 476.88 USD

Add to Wish List

Qty

Sale - Save 5%

$ 501.99

This product was last offered at the strikethrough price on
06-14-2026

$ 476.88 USD

Add to Wish List

ECS 5th Generation High-Performance Brake Rotors

ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation, iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors.

V5 Cross Drilled Rotor Design

The V5 cross drilled rotor design offers excellent heat dissipation and wet-weather performance, making it an ideal choice for high-performance driving enthusiasts.

Premium Quality & Engineering

Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience.

Unmatched Performance for All Drivers

Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation.

Upgrade your braking performance today!

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front - F22/23, F3X,...

For vehicles without M Carbon ceramic brakes

T#:553594

Part#: 493129

In Stock

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments.

Show More Show Less

Hawk Rear HPS 5.0 Performance Brake Pad Set - F8X M3/4, F3X, F22/23 ...

For vehicles without carbon ceramic brakes

T#:394355

Part#: HB766B.624

In Stock

$ 154.99

This product was last offered at the strikethrough price on
04-27-2026

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving.

Show More Show Less

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - F80/82/83 ...

T#:367141

Part#: 010025ECS01B

In Stock

Sale - Save 5% $ 122.99

This product was last offered at the strikethrough price on
06-13-2026

$ 116.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 122.99

This product was last offered at the strikethrough price on
06-13-2026

$ 116.84 USD

Add to Wish List

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front and Rear - F22...

For vehicles without M Carbon ceramic brakes

T#:553644

Part#: 49314933RSL29KT

In Stock

$ 862.99 USD

Add to Wish List

Qty

$ 862.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments.

Show More Show Less

Turner Stainless Steel Brake Lines - Rear - F8x

T#:582994

Part#: 022761TMS01

In Stock

Sale - Save 15% $ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 88.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 88.39 USD

Add to Wish List

Factory rubber brake lines can expand under pressure, requiring more fluid volume and more pedal travel for the desired stopping force. What is often thought to be brake fade or fluid boiling, can actually be the brake lines expanding under pressure. This expansion is even more prominent in aged and weathered rubber hoses. Turner Motorsport Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems.

Show More Show Less

EBC Rear BlueStuff NDX Trackday Brake Pad Set

For vehicles without carbon ceramic brakes

T#:8014970

Part#: DP52133NDX

In Stock

5% off MSRP $ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

Qty

5% off MSRP

$ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

Bluestuff NDX is an intermediate grade trackday and race pad making it the material of choice for many club level racers and serious trackday enthusiasts. However, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC are pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on some E.U. fitments, making it unique in being the first truly track-focused pad which is also perfectly legal for use on the public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads. For customers with the experience of EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a track pad with even greater fade resistance. However, being a track-focused material, customers may experience a noticeable increase in both brake dust and brake noise. As is often the case with friction materials, an increase in ultimate performance is often met by an increase in noise and dust.

Show More Show Less

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - F8X M2,...

T#:384939

Part#: 010025ECS02AKT

In Stock

Sale - Save 10% $ 211.99

This product was last offered at the strikethrough price on
06-13-2026

$ 190.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 211.99

This product was last offered at the strikethrough price on
06-13-2026

$ 190.79 USD

Add to Wish List

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Show More Show Less

BMW F8X F3X Rear EBC YellowStuff Performance Brake Pad Set

For vehicles without carbon ceramic brakes

2X Entries For Our Spin To Win Sweepstakes!

T#:392069

Part#: DP42133R

In Stock

5% off MSRP $ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

Qty

5% off MSRP

$ 235.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

EBC Yellowstuff brake pads are designed for high friction and strong stopping power, with good heat resistance for heavy braking. In 2021, the formulation was updated to remove copper for environmental compliance, resulting in a longer lifespan but also a longer bedding-in period. As a result, Yellowstuff is no longer recommended for track use and is best suited for high-performance street driving and heavy-duty applications such as towing with trucks and SUVs. For track day use, EBC now recommends Bluestuff pads, which offer quicker bed-in times and better performance in racing conditions while remaining street-friendly.

Show More Show Less

G-Stop Stainless Steel Brake Line Kit - Front & Rear

T#:943217

Part#: 31063

In Stock

31% off MSRP $ 238.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.99 USD

Add to Wish List

Qty

31% off MSRP

$ 238.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.99 USD

Add to Wish List

Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow. Features: Performance Enhancement & Safety Improvement Eliminates Sponginess Under Braking Increases Braking Efficiency Abrasion and Corrosion Resistant

Show More Show Less

ECS Rear V5 Drilled Brake Rotors - Set (370x24)

For vehicles without M Carbon ceramic brakes

T#:17704865

Part#: 34212284811-X

In Stock

Sale - Save 3% $ 407.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.74 USD

Add to Wish List

Qty

Sale - Save 3%

$ 407.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.74 USD

Add to Wish List

Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 cross drilled rotor design offers excellent heat dissipation and wet-weather performance, making it an ideal choice for high-performance driving enthusiasts. The 5th generation slotted brake rotor also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

034 Motorsport 2-Piece Front Brake Rotor Kit - 380x30mm - BMW F8X M2 ...

T#:6151327

Part#: 034-301-1009

In Stock

$ 1,097.00 USD

Add to Wish List

Qty

$ 1,097.00 USD

Add to Wish List

The 034Motorsport 2-Piece Floating Front Brake Rotor Upgrade Kit for the BMW F8x M2/M3/M4 is a complete replacement 380mmx30mm brake rotor kit, designed to work flawlessly with the factory front calipers found on the BMW F8x M2/M3/M4. Weighing in at approximately 23.8lbs, each rotor reduces rotational weight by 0.2lbs on each corner over the factory 24.0lbs rotors. While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat. The face of the 034Motorsport 2-Piece Floating Front Brake Rotor Upgrade Kit utilizes J-Slot slots to clean the pad and surface of contaminants and allows hot pad outgassing, all while reducing overall braking noise compared to a traditional slotted rotor. The 034Motorsport rotor and hat floating mount system utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat. FEATURES: Lightweight Construction (23.8lb 034Motorsport Rotor vs. 24.0lb OE BMW Rotor) Floating, 2-Piece Design Aerospace Grade Aluminum Hats CM-250 Special Alloy Rotor Rings J-slotted Friction Face OEM Fitment & Functionality 72 Properly Oriented Curved Vanes Force Cooling Air through Brake Disc Floating Bobbins Mounting System Replaceable Rotor Rings Lower Long-term Maintenance Cost WHAT'S INCLUDED: 380x30 Left Rotor 380x30 Right Rotor Installation and Break-in Instruction Sheets OE PART INTERCHANGE: 34 11 2 284 809 (L) 34 11 2 284 810 (R)

Show More Show Less

Brake Pad Wear Sensor Delete - F3x/F8x

T#:50276462

Part#: 059150LA01

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-14-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
06-14-2026

$ 19.49 USD

Add to Wish List

Brake pad wear sensors are a convenient part of the braking system, notifying the driver of when the material on the brake pads are getting low and need to be serviced. Unfortunately it is common in custom or upgraded braking systems that the pad wear sensor is non-existent or does not mate properly with the connector on your vehicle, leaving you with a brake pad wear warning every time you start your vehicle.

ECS Tuning has developed this direct-fit Brake Pad Wear Sensor Bypass to alleviate this issue. This sensor bypass will trick the vehicle's electronics into thinking that the brake pads have adequate pad material to keep the dashboard warning from appearing. No more unnecessary warnings when installing a big brake kit or your own custom setup. This bypass is a plug-and-play component that requires no modifications so you can revert back to your OEM setup if necessary.

Some vehicles may be equipped with two front brake pad wear sensors, or a front and rear sensor, please be sure to double check the required quantity for your vehicle before placing an order.

*During installation, make sure to clean the mated female connector on your vehicle of any dirt or debris to ensure that the Brake Pad Wear Sensor Bypass is engaged securely.

Show More Show Less

F8X M2 / M3 / M4 Front YellowStuff Performance Brake Pads

2X Entries For Our Spin To Win Sweepstakes!

T#:1856014

Part#: DP42360R

In Stock

5% off MSRP $ 298.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.99 USD

Add to Wish List

Qty

5% off MSRP

$ 298.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.99 USD

Add to Wish List

EBC Yellowstuff brake pads are designed for high friction and strong stopping power, with good heat resistance for heavy braking. In 2021, the formulation was updated to remove copper for environmental compliance, resulting in a longer lifespan but also a longer bedding-in period. As a result, Yellowstuff is no longer recommended for track use and is best suited for high-performance street driving and heavy-duty applications such as towing with trucks and SUVs. For track day use, EBC now recommends Bluestuff pads, which offer quicker bed-in times and better performance in racing conditions while remaining street-friendly.

Show More Show Less

Brembo DOT 5.1 Brake Fluid - 1 Liter

5X Entries For Our G87 M2 Sweepstakes!

T#:396547

Part#: L05010

In Stock

30% off MSRP $ 29.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Qty

30% off MSRP

$ 29.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Synthetic DOT 4 brake fluid.
Boiling Point - Dry: 500 Degrees Fahrenheit / Wet: 356 Degrees Fahrenheit.
Specially formulated to work with DOT 4 required braking systems.

Rear Euro Ceramic Brake Pad Set - F2X F3X G8X

For 2020 and earlier model years without M Carbon Ceramic Brakes (S2NKA=NO)

T#:558483

Part#: EUR1656

In Stock

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Turner Motorsport presents Akebono Euro Ceramic Brake Pads, harnessing innovative ceramic brake technology for superior braking performance. With decades of experience in motorsports, Akebono's ceramic brake pads offer unmatched benefits over traditional metal compound pads. The manufacturer-approved formulation ensures excellence, with advantages including reduced brake fade in hot conditions, shorter stopping distances, minimal brake dust, and significantly increased brake rotor lifespan.

Innovative Ceramic Technology: Utilizes advanced ceramic brake pad technology.
Manufacturer-Approved Formulation: Ensures unmatched compound quality.
Reduced Brake Fade: Ceramic's slower heat absorption prevents fading during heavy braking in hot conditions.
Shorter Stopping Distances: Higher co-efficient of friction enhances stopping power.
Minimal Brake Dust: Lower metal content leads to a significant reduction in brake dust.
Increased Brake Rotor Life: Drastically improves the lifespan of brake rotors.
Proven Quality: Akebono Euro brake pads used in over 90 vehicle models as original equipment.

Upgrade your BMW's braking system with Akebono Euro Ceramic Brake Pads from Turner Motorsport.

Show More Show Less

034 Motorsport 2-Piece Rear Brake Rotor Kit - 370x24mm - Silver Hats ...

T#:6151328

Part#: 034-301-2009

In Stock

$ 1,165.00 USD

Add to Wish List

Qty

$ 1,165.00 USD

Add to Wish List

The 034Motorsport 370mmx24mm 2-Piece Floating Rear Brake Rotor Upgrade Kit for the BMW F8x M2/M3/M4 is a complete replacement brake rotor kit, designed to work flawlessly with the factory rear calipers found on the BMW F8x M2/M3/M4. Weighing in at approximately 20.6lbs, our lightweight design retains proper thermal mass in the rings to adequately capture heat, while utilizing 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat. The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form allowing hard street use and long days at the track allowing you to drive versus working on the car. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat, and improvement over the cooling of the factory rotor The face of the rotor utilizes J-Slot slots to clean the pad and surface of contaminants and allows hot pad outgassing, all while reducing overall braking noise compared to a traditional slotted rotor. The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat. FEATURES: Lightweight Construction (20.6lb 034Motorsport Rotor), the Same Weight as OEM but With Improved Cooling and Metallurgy Floating Bobbins, 2-Piece Design with radial and Lateral Expansion Capability, OE Only Allows Radial Expansion Aerospace Grade Aluminum Hats CM-250 Special Alloy Rotor Rings Designed Specifically for Hard Street and Track Use, OE Replacement Rotors Can Warm Under These Conditions J-slotted Friction Face versus OEM drilled which can crack OEM Fitment & Functionality 72 Curved Vanes Force Cooling Air through Brake Disc Replaceable Rotor Rings Which Saves Money Over OEM Replacement in the Long Run Lower Long-term Maintenance Cost WHAT'S INCLUDED: 370x24 Left Rotor 370x24 Right Rotor Installation and Break-in Instruction Sheets OE PART INTERCHANGE: 34 11 2 284 811 (L) 34 11 2 284 812 (R)

Show More Show Less

6.5 Liter Fluid Extractor with Brake Bleeding Adapter - Bundle ...

T#:26504984

Part#: 011885SCH01A02KT

In Stock

Sale - Save 25% $ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD

Add to Wish List

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
Organized Efficiency: Integrated hose storage streamlines your extraction process.
Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose. This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - F80/82/83 M...

T#:552892

Part#: 010025ECS02

In Stock

Sale - Save 15% $ 88.99

This product was last offered at the strikethrough price on
06-14-2026

$ 75.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 88.99

This product was last offered at the strikethrough price on
06-14-2026

$ 75.64 USD

Add to Wish List

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Show More Show Less

Hawk HP Plus Brake Pads - Front - F8X M, F3X F2X

For vehicles without carbon ceramic brakes

T#:637361

Part#: HB765N.664

Ships on Sep 17, 2026

$ 216.99 USD

Add to Wish List

Qty

$ 216.99 USD

Add to Wish List

Hawk's HP Plus pads fill the need for a "dual-purpose" pad - offering acceptable street performance that also holds up well on the racetrack. The beauty of these pads is that you can put them on at home or your shop and use them to drive to and from the track, with a full day of on-track driving in between. While these track pads actually do work on the street, noticeable increases in noise, dust, and brake wear are to be expected. These pads are great for the weekend track junkie who wants exceptional street performance while also having a capable pad on the track. They are excellent for novice and first-time drivers while also being a favorite of instructors too. And they are inexpensive compared to most full race pads. These are not all-out racing pads, however, and they work best when used within their temperature range (100-800*F). Higher friction levels and brake temps will increase wear, especially on heavier cars. Brake cooling kits are strongly recommended. If you find these pads are not lasting, or you are exceeding their performance capability, it will be time to step into a full, dedicated track/racing pad.

Show More Show Less

Hawk HP Plus Brake Pads - Rear - F8X M, F3X F2X

For vehicles without carbon ceramic brakes

T#:637360

Part#: HB766N.624

Ships on Sep 17, 2026

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Hawk's HP Plus pads fill the need for a "dual-purpose" pad - offering acceptable street performance that also holds up well on the racetrack. The beauty of these pads is that you can put them on at home or your shop and use them to drive to and from the track, with a full day of on-track driving in between. While these track pads actually do work on the street, noticeable increases in noise, dust, and brake wear are to be expected. These pads are great for the weekend track junkie who wants exceptional street performance while also having a capable pad on the track. They are excellent for novice and first-time drivers while also being a favorite of instructors too. And they are inexpensive compared to most full race pads. These are not all-out racing pads, however, and they work best when used within their temperature range (100-800*F). Higher friction levels and brake temps will increase wear, especially on heavier cars. Brake cooling kits are strongly recommended. If you find these pads are not lasting, or you are exceeding their performance capability, it will be time to step into a full, dedicated track/racing pad.

Show More Show Less

Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge

T#:580425

Part#: B8800118

In Stock

Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Qty

Sale - Save 3%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Used to measure the wear on brake discs and ball joints.

Hawk Rear Racing Brake Pad Set DTC-60 - F8X M3/4, F3X, F22/23 ...

T#:394354

Part#: HB766G.624

Ships in 7 Business Days

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.

Featuring:

High Intial Bite
Consistent torque over all pressures
Operating Range:400-1600°F; 204-871°C
High Temp & High Torque
Provides Superior Pad and Disc Wear
Excellent Torque Control
Excellent Modulation and Release Characteristics
Designed for High Deceleration Rates.

*Not for vehicles with Carbon Ceramic brake rotors.

Show More Show Less

034Motorsport Stainless Steel Braided Brake Line Kit, F8X BMW M2, M2 ...

T#:37655969

Part#: 034-303-0026

In Stock

$ 181.00 USD

Add to Wish List

Qty

$ 181.00 USD

Add to Wish List

Improve the braking efficiency of your BMW F8X M2, M2 Competition, M3, or M4 by upgrading the factory rubber brake hoses to the 034Motorsport Stainless Steel Braided Brake Line Kit. This enhancement delivers a better pedal feel and promotes more reliable braking performance. The brake lines feature Teflon linings, are reinforced with stainless steel braiding, and are protected by a durable black PVC coating, ensuring longevity and enhanced brake responsiveness.

Show More Show Less

BMW F8X M2 M3 M4 Front Full-Floating Slotted Rotors Set- 380X30mm - T...

For vehicles with standard brakes only, not for vehicles with carbon ceramics brakes

T#:1423069

Part#: 026549TMS01A12KT

In Stock

$ 1,671.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,149.99 USD

Add to Wish List

Qty

$ 1,149.99 USD

Add to Wish List

BMW F8X M2C M3 M4 Front Full-Floating Slotted Rotors Set - 380X30mm - TrackSport delivers exceptional braking performance with its advanced design. Engineered in-house by Turner Motorsport, these rotors feature a full-floating two-piece construction and slotted grooves, ensuring smooth, consistent braking and effective expulsion of gases and dust. This design maintains optimal braking feel even under prolonged heavy use.

OE Fitment and Installation for easy replacement.
Two-Piece Fully Floating Design for superior heat resistance and reduced brake fade.
Heat-treated Rotor Rings extend life and minimize wear.
Factory-applied Coating prevents rust and corrosion.
Lightweight Design reduces excess rotational mass.
Slotted Grooves enhance expulsion of brake dust and gases.
Internal Vanes improve cooling and braking performance.

Kit Content:

Turner Motorsport F8x Front Full-Floating Slotted TrackSport Rotor - Front Right
Turner Motorsport F8x Front Full-Floating Slotted TrackSport Rotor - Front Left

Show More Show Less

Pagid Racing RSL1 Endurance Racing Brake Pads - Rear - F22/23, F3X, F...

For vehicles without M Carbon ceramic brakes

T#:553598

Part#: 4933RSL1

Ships in 7 Business Days

$ 432.99 USD

Add to Wish List

Qty

$ 432.99 USD

Add to Wish List

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance.

Turner Motorsport Rear Full-Floating Slotted TrackSport Rotors Set - ...

For vehicles with standard brakes only, not for vehicles with carbon ceramics brakes

T#:1438241

Part#: 026549TMS02A1KT

In Stock

$ 1,381.99 USD

Add to Wish List

Qty

$ 1,381.99 USD

Add to Wish List

Our in-house engineered TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade.

Show More Show Less

Turner Motorsport - Rear Rotors (Full-Floating Slotted TrackSport) Pe...

For vehicles with standard brakes only, not for vehicles with carbon ceramics brakes

T#:1347185

Part#: 026549TMS02A-KT

In Stock

$ 1,926.99 USD

Add to Wish List

Qty

$ 1,926.99 USD

Add to Wish List

(370x24mm) Our in-house engineered TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade.

Show More Show Less

034Motorsports Replacement Front Rotor Ring Set - F8X M2/M3/M4 ...

T#:25341441

Part#: 034-304-1009

Ships in 2 Business Days

$ 736.00 USD

Add to Wish List

Qty

$ 736.00 USD

Add to Wish List

Revive your braking system with our rotor replacement kit, designed for the 2-piece Floating Front Brake Rotor Upgrade Kit for BMW F8X M2/M3/M4. This comprehensive kit seamlessly integrates with factory front calipers, enhancing braking performance on the street, track, and in HDPE driving conditions. Our replacement ring kit simplifies rotor set maintenance by providing new Rotor Rings and accompanying hardware. Benefit from cost-effective upkeep while retaining top-notch braking upgrades. Key features: Cost-effective alternative to complete brake disc replacement Matches original rotor ring specifications Constructed from CM-250 Special Alloy Features J-slotted friction face design 72 curved vanes ensure efficient brake disc cooling Kit includes: Replacement Rotor Rings for 2-piece Floating Front Brake Rotor Upgrade Kit for BMW F8X M2/M3/M4 Floating Bobbins Mounting System Comprehensive installation and break-in instruction sheets.

Show More Show Less

Pagid Racing RSC1 Ceramic Composite Rotor Brake Pad Set - Front - F80...

T#:553606

Part#: 4934RSC1

In Stock

$ 788.99 USD

Add to Wish List

Qty

$ 788.99 USD

Add to Wish List

Ceramic composite rotors require a specific type of brake pad so that they do no get damaged. If you have converted your rotors to a ceramic composite style, then performance brake pad options are now available from Pagid Racing.

Show More Show Less

IRP Universal Hydraulic Handbrake

T#:584206

Part#: IRPHBK1

Ships on Nov 4, 2026

Starting at $ 246.99 USD

Add to Wish List

Starting at $ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

VTT Wireless Plug & Play Line Lock Kit - BMW F22/23 F3X F8X G2X G8X, ...

T#:41965005

Part#: VTT-WIRELESS-LL

Ships in 10 Business Days

$ 629.99 USD

Add to Wish List

Qty

$ 629.99 USD

Add to Wish List

VTT now offers a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. VTT's newly designed and released line lock kits utilize a 40amp wireless remote control switch with four different modes, allowing you to tailor your line lock setup exactly as you prefer.

Show More Show Less

034Motorsport 2-Piece Floating Brake Rotor Upgrade - Front - F8X M2/M...

For Competition or CS models with 400x36mm M Sport rotors or vehicles with a brake retr...

T#:36438804

Part#: 034-301-1018

Ships in 2 Business Days

$ 1,433.00 USD

Add to Wish List

Qty

$ 1,433.00 USD

Add to Wish List

The 034Motorsport 400mmx36mm 2-Piece Floating Front Brake Rotor Upgrade Kit for the BMW F8X BMW M2, M2 Competition/CS, M3/M4 C/CS, & M4 GTS is a complete replacement brake rotor kit, designed to work flawlessly with the factory front calipers found on the BMW F8x M2 Competition/CS & M3/M4. This is a true high-performance and racing-quality rotor that won’t let you down when you need hard braking the most! Weighing in at approximately 30.6 lbs, our lightweight design retains proper thermal mass in the rings to adequately capture heat while utilizing 48 enhanced directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat. Note: For F8X M2 CS, M3/M4 Competition/CS, or M4 GTS owners with the factory M-CCB Carbon Ceramic Brake Package (2NK) looking for a much more cost-effective brake rotor alternative, the 034Motorsport 2-Piece Floating Rotors are a direct swap for your factory carbon ceramic brake rotors! 034Motorsport 2-Piece Rotors have been thoroughly tested in high-intensity motorsport events, proven to significantly improve braking and thermal headroom and for extreme performance street and track driving, making them the perfect replacement rotor for your BMW F8X.

Show More Show Less

Brembo Calipers Lotus, A, C, F - Street Brake Pad Set - Brembo Kevlar...

5X Entries For Our G87 M2 Sweepstakes!

T#:6731762

Part#: AP1166.15R4S

Ships in 3 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

Brembo 2-Piston Brake Caliper Set - Rear - Black

For vehicles without Carbon Ceramic Brakes (S2NKA=No)

5X Entries For Our G87 M2 Sweepstakes!

T#:24212307

Part#: 342167994612B

In Stock

32% off MSRP $ 1,391.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 952.99 USD

Add to Wish List

Qty

32% off MSRP

$ 1,391.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 952.99 USD

Add to Wish List

As an OE supplier, these Brembo replacement brake calipers offer affordable performance that you can count on! This kit includes both right and left rear calipers, finished in black, as well as the pins and clips needed for install.

Show More Show Less

Pagid Racing RSL1 Endurance Racing Brake Pads - Front - F22/23, F3X, ...

For vehicles without M Carbon ceramic brakes

T#:553595

Part#: 4931RSL1

Ships in 7 Business Days

$ 515.99 USD

Add to Wish List

Qty

$ 515.99 USD

Add to Wish List

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance.

Pagid Racing RSC1 Ceramic Composite Rotor Brake Pad Set - Rear - F8X ...

T#:553611

Part#: 1287RSC1

Ships in 7 Business Days

$ 561.99 USD

Add to Wish List

Qty

$ 561.99 USD

Add to Wish List

Ceramic composite rotors require a specific type of brake pad so that they do no get damaged. If you have converted your rotors to a ceramic composite style, then performance brake pad options are now available from Pagid Racing.

Show More Show Less

Brembo 2-Piston Brake Caliper Set - Rear - Silver

For vehicles without Carbon Ceramic Brakes (S2NKA=No)

5X Entries For Our G87 M2 Sweepstakes!

T#:24212308

Part#: 342167994612S

Special Order: No Guaranteed ETA

$ 952.99 USD

Add to Wish List

Qty

$ 952.99 USD

Add to Wish List

As an OE supplier, these Brembo replacement brake calipers offer affordable performance that you can count on! This kit includes both right and left rear calipers, finished in black, as well as the pins and clips needed for install.

Show More Show Less

Turner Motorsport Front Full-Floating Slotted TrackSport Rotors Perfo...

For vehicles with standard brakes only, not for vehicles with carbon ceramics brakes

T#:1347184

Part#: 026549TMS01A10KT

In Stock

Sale - Save 25% $ 2,305.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,734.29 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2,305.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,734.29 USD

Add to Wish List

Our in-house engineered TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade.

Show More Show Less

Turner Motorsport - Front & Rear Rotors Set (Full-Floating Slotted Tr...

For vehicles with standard brakes only, not for vehicles with carbon ceramics brakes

T#:1423068

Part#: 026549TMS01A11KT

In Stock

$ 3,053.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2,531.99 USD

Add to Wish List

Qty

$ 2,531.99 USD

Add to Wish List

Our in-house engineered TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Brakes & Brake Parts for BMW F80 M3 S55 3.0L

Sub-Categories

ECS 5th Generation High-Performance Brake Rotors

V5 Cross Drilled Rotor Design

Premium Quality & Engineering

Unmatched Performance for All Drivers

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results