BMW Suspension Parts for BMW F80 M3 S55 3.0L

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

T#:554715

Part#: PFR5-4026B

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Turner Front Adjustable Camber Plates - Race - F8X M3 M4

For vehicles without EDC

T#:598700

Part#: 023429TMSKT2

In Stock

Sale - Save 20% $ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

Sale - Save 20%

$ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

One of the tricks for getting your F8x M3 or M4 to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber, there is more grip. BMWs typically have less camber in the front to create understeer, but if you're running a stock setup on the track or autocross, you are giving up speed and time as the front tires run out of grip sooner than they should. Designed in-house for the highest quality and longevity possible, we are confident our Race Camber Plates are the perfect solution for your F8X BMW M! These camber plates are fully compatible with OEM bump stops, factory style springs. and include all needed installation hardware!

Show More Show Less

ECS Coilover Damping Extensions - 220MM

T#:42369339

Part#: 004673LA01

Ships on Oct 19, 2026

Sale - Save 10% $ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Show More Show Less

Delphi Front Lower Control Arm - Right - BMW F87 M2, F80 M3, F82/F83 ...

T#:597000

Part#: 31122284530

In Stock

$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.

Show More Show Less

ECS F80 M3 Lowering Springs

T#:20782253

Part#: 051084LA01

In Stock

Sale - Save 15% $ 340.99

This product was last offered at the strikethrough price on
06-14-2026

$ 289.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 340.99

This product was last offered at the strikethrough price on
06-14-2026

$ 289.84 USD

Add to Wish List

Elevate your driving experience with enhanced performance and aesthetics. ECS lowering springs are crafted to optimize both handling and comfort, striking the perfect balance between performance and drivability. With an average lowering range of 1.25" front and 1.0" rear, enjoy the benefits of a lower center of gravity, resulting in superior cornering and enhanced steering feedback. Not only do these lowering springs improve handling, but they also deliver a remarkable aesthetic transformation by reducing the wheel gap, giving your car a more planted and fitted appearance.

Features and Design:

Average Front lowering of 1.25"
Average Rear lowering of 1.0"
Lowered center of gravity
Compatible with cars equipped with EDC
Linear style springs
Black powder coating with red ECS logo
MADE IN THE USA
Designed specifically for your chassis these ECS lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have a higher spring rate like coilovers, it takes much more force to compress the spring, leading to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. Our springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.

Show More Show Less

Genuine BMW Front Bump Stop

T#:174675

Part#: 31336857729

In Stock

11% off MSRP $ 41.08

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.48 USD

Add to Wish List

Qty

11% off MSRP

$ 41.08

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.48 USD

Add to Wish List

Genuine BMW Additional Shock Absorber, Front

034 Motorsport Billet Adjustable Rear Sway Bar End Links - Pair - BMW...

T#:25109063

Part#: 034-402-4042

In Stock

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Replace your flimsy, imprecise OEM sway bar end links with 034Motorsport performance-engineered adjustable spherical end links! 034Motorsport's Billet Adjustable Rear Sway Bar End Links allow for the uncompromised transfer of suspension energy and movement to the sway bar. With its adjustable length design, the 034Motortsport Billet Adjustable Rear Sway Bar End Links allow you to maintain proper preload on the sway bar when lowering your car. 034Motorsport sway bar end links are the only options on the market with high misalignment sphericals, ensuring that the end links do not bind as the suspension articulates. In addition, adjustable sway bar end links allow you to adjust preload on the sway bar, as well as alleviate potential sway bar clearance issues caused by lowering your car. By utilizing our 034Motorsport adjustable end links, the lengths of each end link can be adjusted so that the end link can be easily installed at ride height without needing to twist the bar to get it to fit. Zero preload provides symmetrical handling in right and left turns. Features: CNC Machined 6061-T6 Aluminum End Link Bodies - Anodized Black for Durability CNC Machined Stainless Steel End Link Spacers Motorsport Quality Aurora Spherical Bearings Featuring Self-Lubricating Teflon Race Lining Spherical Design Eliminates Deflection and Ensures Proper Articulation Fully Adjustable Direct Drop-In Replacement for Factory End Links Fully Rebuildable Sold In Pairs Fits all F2x/F3x 2 and 3 Series, and F8x M2, M3, and M4 What's Included: Motorsport Billet Adjustable Rear Sway Bar End Link (Pair)

Show More Show Less

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Genuine BMW Front Sway Bar Bushing Bracket - E82 1 M Coupe E90 E92 E9...

T#:15526

Part#: 31352283037

In Stock

5% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

5% off MSRP

$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

GENUINE BMW STABILIZER SUPPORT

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit

T#:5580987

Part#: FLM-F87-1BFLINK

Ships in 4 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.

Show More Show Less

SPL Parts Titanium Series Rear Lower Traction Arm Pair - F8X M2 M3 M4...

T#:553689

Part#: SPLRTRF8X

Ships in 1 Business Day

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

Genuine BMW Strut Mount - 5 Bolt - F80,F82,F83

T#:212949

Part#: 31307853702

Ships in 1 day

7% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

7% off MSRP

$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Genuine BMW Genuine BMW Guide Support Aufnahme 5Xm8 - 31307853702

Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...

T#:637367

Part#: 025990TMS012

In Stock

$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Eliminate sloppy handling with Turner's performance control arms!

Emmanuele Design Lowering Spring Set - F80 M3

T#:555227

Part#: EMD-F80-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.

Show More Show Less

Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3...

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

T#:593661

Part#: BMU MR41

In Stock

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport reccommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Fits the following BMWs: 2013+ F80/82 BMW M3 M4 2016+ F87 BMW M2

Show More Show Less

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Ball Joint Removal Tool 12-56mm

T#:379389

Part#: 008959SCH01A

In Stock

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
05-02-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
05-02-2026

$ 50.99 USD

Add to Wish List

This tool is built to get the job done quickly and easily. This can used on most steering and suspension ball joints.

5/64" Solenoid Valve

T#:370667

Part#: 24636

Ships in 3 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Upgrade your BMW's ride control with our 5/64 valve, offering the performance of an electric valve at an affordable price. Ideal for easy height adjustment, this valve ensures efficient ride control with 1/8" FNPT threads, providing versatility and reliability for your vehicle's suspension system.

Affordable alternative to electric valves
Easy height adjustment for improved ride control
Versatile 1/8" FNPT threads
Reliable performance for BMW suspension systems

Show More Show Less

URO Lower Rear Control Arm - BMW F87 F80 F82/83 G87 G80 G82/83 ...

T#:43750225

Part#: 33322284534

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Restore your suspension's comfort and handling with a brand new control arm from URO

Bav Auto Shock and Strut Nut Tool

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Genuine BMW Right Side Thrust arm - F80 M3, F83 M4, F87 M2, F82 M4 ...

T#:198737

Part#: 31122284532

In Stock

22% off MSRP $ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD

Add to Wish List

Qty

22% off MSRP

$ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD

Add to Wish List

Genuine BMW Right Tension Strut With Rubber Mounting

H&R Sport Spring Set - F80 M3 (2014+)

We Price Match - Give Us A Call or Chat!

T#:201498

Part#: 50474-6

In Stock

15% off MSRP $ 489.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

15% off MSRP

$ 489.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Direct from Germany, H&R Springs are the highest quality sport springs available. These H&R Sport springs for your F80 M3 work well with the factory shocks and dampening to retain much of the factory drive ability and ride. This spring set will make a subtle yet noticeable visual improvement to the F80 M3's stance, reducing the perceived fender gap of the stock ride height. This spring kit fits F80 M3 including cars with Adaptive M Suspension.

Show More Show Less

BMW F8X F2X F30 034Motorsport Billet Adjustable Front Sway Bar End Li...

T#:31125663

Part#: 034-402-4041

In Stock

$ 201.00 USD

Add to Wish List

Qty

$ 201.00 USD

Add to Wish List

BMW F8X F2X F30 034Motorsport Billet Adjustable Front Sway Bar End Links offer superior performance by replacing the flimsy OEM sway bar end links with high-quality, adjustable spherical end links. These end links are engineered to ensure precise transfer of suspension energy to the sway bar, enhancing both street and track performance. Key features include:

CNC machined from 6061-T6 aluminum with an anodized black finish for durability
Zinc-plated steel ball joints for increased strength
Spherical design eliminates deflection and ensures proper articulation
Motorsport quality Aurora spherical bearings with self-lubricating Teflon race lining
+/- 0.75" of adjustability (1.5" total adjustment range) for precise sway bar preload adjustment
Essential for corner balancing lowered vehicles and optimizing sway bar reaction time
Compatible with all stock and aftermarket sway bars
Sold in pairs with all necessary hardware included

Show More Show Less

Schwaben 21mm and 22mm Double Sided Strut Wrench

T#:396481

Part#: 017822SCH01A

In Stock

Sale - Save 25% $ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Both of the most popular strut nut sizes on one wrench make this wrench perfect for suspension work. Also, thanks to its stepped design, it can easily get in to tight spots. Each end has a closed design measuring at 21mm or 22mm.

Show More Show Less

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

T#:405066

Part#: 35020-02

In Stock at Vendor

$ 655.99 USD

Add to Wish List

Qty

$ 655.99 USD

Add to Wish List

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Sway Bar End Link Kit - V2 ...

T#:28038192

Part#: FLM-F8X-G8X-1BRL

Ships in 1 Business Day

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

Genuine BMW Rear Lower Control Arm Balljoint - Outer - E82/E88 E9X F2...

T#:21815

Part#: 33326792553

Ships in 1 day

15% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Qty

15% off MSRP

$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Genuine BMW Ball Joint
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12

Rear Sway Bar Bushing - 25mm - Street

T#:22163393

Part#: PFR5-4013-25

Ships in 1 Business Day

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

When using PowerFlex Street Series Rear 25 mm Sway Bar Bushings for your BMW F80/F82F83, you will experience the benefits of a product that is made from the best material - polyurethane. You will feel: Enhanced Handling and Performance: Upgrading to Powerflex 25 mm rear sway bar bushings is like giving your car a secret performance boost. These bushings are designed to provide better control and stability during sharp turns and quick maneuvers. When you hit those curves, you'll feel your car hugging the road more confidently. Reduced Body Roll: One of the immediate benefits you'll notice is a reduction in body roll. Say goodbye to that sensation of leaning heavily when taking corners. The 14mm rear sway bar bushings work hard to keep your car's body level, resulting in a smoother and more comfortable ride. Improved Grip A better grip on the road is a game-changer, especially if you enjoy spirited driving or track days. With these beefier bushings, your rear tires will stay planted, offering improved traction. Whether you're accelerating out of a turn or holding a steady line, the enhanced grip is your new best friend. Sharper Steering Response: Tired of sluggish steering? These upgraded bushings can sharpen your car's steering response. You'll feel more in control of your vehicle, with quicker reactions to your steering inputs. It's like having a direct line of communication between you and the road. All Powerflex bushings come with a lifetime warranty Fits these BMW models: F80 M3 F82 M4 F83 M4

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:555818

Part#: I-68-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Schwaben 5pc Metric Flare Nut Wrench Set

T#:380810

Part#: 010798SCH01A

In Stock

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

This set is a must have for changing brake, fuel, oil lines of all kinds. Complete size coverage

Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...

T#:20979735

Part#: F8X/E9X-1FLCOCA

Ships in 4 Business Days

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs

Show More Show Less

BWM F80 M3 Swift Springs - 1"F 0.4"R

T#:554767

Part#: 4X909R

Ships in 6 Business Days

$ 400.99 USD

Add to Wish List

Qty

$ 400.99 USD

Add to Wish List

For BMW enthusiasts seeking enhanced performance and handling, the BWM F80 M3 Swift Springs - 1"F 0.4"R are the ideal choice. Engineered to precise specifications, these Swift Springs offer improved agility and responsiveness on the road or track. With a front drop of 1 inch and a rear drop of 0.4 inches, they provide a perfect balance of comfort and sportiness.

Improved performance and handling
Engineered to precise specifications
Enhanced agility and responsiveness
Front drop of 1 inch and rear drop of 0.4 inches
Perfect balance of comfort and sportiness

Upgrade your BMW F80 M3 with the BWM F80 M3 Swift Springs and experience a new level of driving performance.

Show More Show Less

Eibach Pro-Kit Performance Springs -

T#:578661

Part#: E10-20-036-01-22

In Stock at Vendor

10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW. With this kit, you can expect an average lowering of: Front - 0.8" Rear - 0.5"

Show More Show Less

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

T#:8294107

Part#: BMU MW40S1

Ships on Sep 16, 2026

$ 3,977.99 USD

Add to Wish List

Qty

$ 3,977.99 USD

Add to Wish List

Turner Motorsport has teamed up with Ohlins to bring the ultimate street coilover to the F8X community. Working alongside the engineers at Ohlins, we have developed a special recipe derived from the standard Ohlins DFV Road and Track kit. This Street-Performance system includes modified spring rates and valving for a more streetable coilover experience. If you are looking to enjoy your S55 car to the fullest, but don't want to forgo any ride quality, these are the perfect option.

Show More Show Less

Schwaben Wheel Mount Kit & Magnetic Caster/Camber Gauge

T#:385959

Part#: 010891SCH01AKT

In Stock

Sale - Save 3% $ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Perform your own caster and camber adjustments with this professional kit

URO Accelerating Sensor - Front - BMW F22/23 F3X F8X F25 G01 F26 G02 ...

T#:43750248

Part#: 37155A0F905

Ships in 1 Business Day

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Accelerating Sensors failing can greatly affect the VDC (Variable Damper Control) system causing the vehicle to underperform in corners or result in a less-than-comfortable ride. This URO replacement will correct this issue and have everything performing like new. 1 sensor per shock/strut.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Bilstein B16 PSS10 Coil Over Suspension - F80 M3, F82 M4, F87 M2 ...

Fits vehicles without electronic (EDC/Adaptive) suspension

T#:215352

Part#: 48-244091

In Stock

31% off MSRP $ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.00 USD

Add to Wish List

Qty

31% off MSRP

$ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.00 USD

Add to Wish List

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Show More Show Less

Bilstein B6 Performance Front Strut - Right

For vehicles with EDC

T#:393559

Part#: 31-246217

In Stock

33% off MSRP $ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

Qty

33% off MSRP

$ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

If you’re looking for suspension performance, the BILSTEIN B6 Performance series shock absorber and strut is the best solution to improve your car’s ride. Unbelievable control, precise handling, ultimate performance and incredible comfort. You'll soon discover there is, quite literally, nothing like it.

Show More Show Less

SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F...

T#:553806

Part#: SPLCRBE9X

Ships in 1 Business Day

$ 413.00 USD

Add to Wish List

Qty

$ 413.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

CTS Turbo Lowering Springs - F80/F82 M3/M4

DCC compatible: These springs are compatible with DCC. These springs couple very well with dynamic damper co

T#:22064611

Part#: CTS-LS-003

Ships in 7 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Featured: Improved handling Excellent ride quality A more aggressive look Precision-tuned spring rates Reduced fender gap If you are looking for a suspension upgrade that won't break the bank, look no further. These lowering springs from CTS will lower your 1.6" in front and 1" in rear on average after break-in eliminating that wheel gap and giving you better handling and driving performance.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

T#:554719

Part#: PFR5-4025BX4

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Show More Show Less

Coil Spring Compressor

T#:1809126

Part#: W80554

Ships in 2 Business Days

$ 64.25 USD

Add to Wish List

Qty

$ 64.25 USD

Add to Wish List

Safely and easily compresses coil springs accessible from the center of the coil.

TC Kline Racing Camber Plates - F80/82/83 M3 M4 & F87 M2 Comp ...

For use with aftermarket coilovers & TC Kline Racing F8X Suspension Kits only - Replace...

For use with aftermarket coilovers & TC Kline Racing F8X Suspension Kits only - Replaces 3 & 5-Bolt Front Strut Mounts

T#:401222

Part#: TCKF8XCP

In Stock

$ 538.00 USD

Add to Wish List

Qty

$ 538.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

KW V3 Series Coilover Kit - Adjustable Damping - F80/F82 M3/M4 (W/O E...

T#:206126

Part#: 352200AN

In Stock at Vendor

$ 3,584.00 USD

Add to Wish List

Qty

$ 3,584.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

Separate adjustments for compression (14 positions) and rebound (infinite settings),

Stiffer springs over stock for less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 25-45mm lowering; Rear = 25-50mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

Lifetime warranty!

This item fits the following BMWs:
2015+ F80 BMW M3
2015+ F82 BMW M4

Show More Show Less

Bilstein B16 DampTronic Coilover Kit - F80 M3, F82/83 M4

T#:555362

Part#: 49-246988

In Stock

31% off MSRP $ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,859.00 USD

Add to Wish List

Qty

31% off MSRP

$ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,859.00 USD

Add to Wish List

All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of this kit. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (DampTronic) suspension kits are made in Germany and feature technology tested on the famed Nurburgring

Show More Show Less

KW V3 Series Coilover Kit - Adjustable Damping - F80/F82 M3/M4 (With ...

T#:349009

Part#: 352200AP

In Stock at Vendor

$ 3,964.00 USD

Add to Wish List

Qty

$ 3,964.00 USD

Add to Wish List

KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results