Showing 8217 results for ""

Sort By:

Brembo 4-Piston Brake Caliper Set - Front - Yellow
For vehicles without Carbon Ceramic Brakes (S2NKA=No)
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:23648664
Part#: 3411679947Y
Special Order: No Guaranteed ETA
$ 1,023.99 USD
Only available at this price
Free Shipping
$ 1,023.99 USD
Only available at this price
Free Shipping
As an OE supplier, these Brembo replacement brake calipers offer affordable performance that you can count on! This kit includes both right and left front calipers, finished in yellow, as well as the pins and clips needed for install.
Show More Show Less
Genuine BMW - Corporate Logo
T#:603390
Part#: 80142463076
Back Ordered
3% off MSRP $ 70.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Only available at this price
Free Shipping
3% off MSRP
$ 70.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Only available at this price
Free Shipping
Genuine BMW apparel
APEX Wheels - Corporate Logo
T#:20386732
Part#: EC7RS189H10D
Back Ordered
Starting at $ 2,856.00 USD
Only available at this price
Free Shipping
Starting at $ 2,856.00 USD
Only available at this price
Free Shipping
18x9 ET30/31 18x10 ET25 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!
Show More Show Less

Schwaben - Corporate Logo
T#:20155633
Part#: 024962SCH02AKT
Back Ordered
Sale - Save 18% $ 227.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD
Only 0 available at this price
Free Shipping on orders $49 and up
Sale - Save 18%
$ 227.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD
Only 0 available at this price
Free Shipping on orders $49 and up
All the necessary components to address your car's fender needs.

Performance Tool - Corporate Logo
T#:2242231
Part#: M202-P
Ships in 1 Business Day
$ 35.24 USD
Only available at this price
Free Shipping on orders $49 and up
$ 35.24 USD
Only available at this price
Free Shipping on orders $49 and up

Click Torque Wrench 3/8" is a precision tool designed for accurate torque measurement and application. Featuring a compact size, this torque wrench is ideal for working in tight spaces while ensuring reliable performance with its ratchet style and engraved scale.

  • Chrome Plated Alloy Steel: Provides enhanced durability and resistance to corrosion for long-lasting use.
  • Compact Design: Perfectly suited for accessing tight spots and confined areas.
  • Ratchet Style: Allows for smooth operation and ease of use with an engraved scale for precise torque settings.
  • Nickel Chrome Plated Alloy Steel: Ensures additional strength and protection against wear.
  • Versatile Size: 3/8" drive size with a torque range of 120 to 960 in. lbs. accommodates a variety of applications.
Show More Show Less
CTS - Corporate Logo
T#:38587661
Part#: CTS-HW-545
Special Order: No Guaranteed ETA
$ 17.99 USD
Only available at this price
Free Shipping
$ 17.99 USD
Only available at this price
Free Shipping
Metal jack pad insert

Race Ramps - Corporate Logo
T#:2438595
Part#: RR-WC-14-SC-2
Back Ordered
$ 344.99 USD
Only available at this price
$ 344.99 USD
Only available at this price
Safer than jack stands and far more attractive, our two-piece, 14-inch high Supercar Wheel Cribs easily accommodate cars with wider tires; whether you need the extra height for fluid changes, general maintenance, or a “wow” factor at your next show.
Show More Show Less
APEX Wheels - Corporate Logo
T#:598730
Part#: SM10189ET30KTKT4
Back Ordered
$ 1,776.00 USD
Only available at this price
Free Shipping
$ 1,776.00 USD
Only available at this price
Free Shipping

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

  • Enhanced strength and lightweight performance
  • Innovative Flow-formed semi-forging process
  • Average weight reduction of 10lbs or more
  • Ample room for brake systems
  • Classic motorsports design matches BMW's aggressive style
Show More Show Less

APEX Wheels - Corporate Logo
T#:40342844
Part#: ARC8RT1895105
Back Ordered
Starting at $ 2,756.00 USD
Only available at this price
Starting at $ 2,756.00 USD
Only available at this price
Apex ARC-8RT 18x9.5" ET22 & 18x10.5" ET22 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less

APEX Wheels - Corporate Logo
T#:19428684
Part#: EC7RS18995ST
Back Ordered
Starting at $ 2,830.00 USD
Only available at this price
Free Shipping
Starting at $ 2,830.00 USD
Only available at this price
Free Shipping
Apex EC-7RS 18x9 ET30 18x9.5 ET35 Wheel Set Apex 9"/9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in forged wheel technology for BMWs. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX Wheels - Corporate Logo
T#:20584604
Part#: VS5RS189H95ST
Ships in 5 Business Days
Starting at $ 2,936.00 USD
Only available at this price
Free Shipping
Starting at $ 2,936.00 USD
Only available at this price
Free Shipping
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!
Show More Show Less
APEX Wheels - Corporate Logo
T#:20584672
Part#: EC71895105ST2
Ships in 5 Business Days
Starting at $ 1,676.00 USD
Only available at this price
Free Shipping
Starting at $ 1,676.00 USD
Only available at this price
Free Shipping
18x9.5 ET28 18x10.5 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less


APEX Wheels - Corporate Logo
T#:590553
Part#: EC7R189ET30KT
Back Ordered
$ 2,892.00 USD
Only available at this price
Free Shipping
$ 2,892.00 USD
Only available at this price
Free Shipping
APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.
Show More Show Less
Permatex - Corporate Logo
T#:3729724
Part#: 56521
Back Ordered
$ 14.95 USD
Only available at this price
Free Shipping on orders $49 and up
$ 14.95 USD
Only available at this price
Free Shipping on orders $49 and up
Formulated specifically for metal, tapered pipe thread fittings
Race Ramps - Corporate Logo
T#:641829
Part#: RR-56
Back Ordered
$ 301.99 USD
Only available at this price
$ 301.99 USD
Only available at this price
56" single piece race ramps - 10.8 degree approach angle

APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Only available at this price
Free Shipping
$ 459.00 USD
Only available at this price
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:40342862
Part#: ARC8RT188595
Back Ordered
Starting at $ 2,676.00 USD
Only available at this price
Starting at $ 2,676.00 USD
Only available at this price
Apex ARC-8RT 18x8.5" ET40​ & 18x9.5" ET22 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less
APEX Wheels - Corporate Logo
T#:40342854
Part#: ARC8RT189522
Back Ordered
Starting at $ 2,716.00 USD
Only available at this price
Starting at $ 2,716.00 USD
Only available at this price
Apex ARC-8RT 18x9.5" ET22 Square Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less

APEX Wheels - Corporate Logo
T#:40512158
Part#: VS51011
Ships in 5 Business Days
Starting at $ 2,156.00 USD
Only available at this price
Starting at $ 2,156.00 USD
Only available at this price
APEX VS-5 19x10" ET25 & 19x11" ET44 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less
APEX Wheels - Corporate Logo
T#:6304580
Part#: EC7191025SMBKKT2
Back Ordered
$ 1,856.00 USD
Only available at this price
Free Shipping
$ 1,856.00 USD
Only available at this price
Free Shipping

NRG - Corporate Logo
T#:585476
Part#: FRP-300RD
Back Ordered
$ 358.00 USD
Only available at this price
$ 358.00 USD
Only available at this price

APEX Wheels - Corporate Logo
T#:40478171
Part#: 10RE199522ANKT
Back Ordered
$ 3,436.00 USD
Only available at this price
$ 3,436.00 USD
Only available at this price
Apex SM-10RE ​19x9.5" ET22 Square Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!
Show More Show Less
KW Coilover Kit Variant 4 - F80, F82 Non-EDC
For production dates before 01/2015, with 3 bolt front top mount
KW Suspension - Corporate Logo
T#:587692
Part#: 3A7200ANKT1
Back Ordered
$ 7,194.00 USD
Only available at this price
$ 7,194.00 USD
Only available at this price
Developed exclusively for super sports cars, sports cars and performance sedans, V4 coilovers are the ultimate in coilover technology featuring 3-way adjustable dampening and leading race technology for the highest street and track coilovers available.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:13036532
Part#: DCTPAN
Back Ordered
$ 599.00 USD
Only available at this price
Free Shipping on orders $49 and up
$ 599.00 USD
Only available at this price
Free Shipping on orders $49 and up


BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...
For vehicles with 5-Bolt Top Mounts & EDC Suspension
BC Racing - Corporate Logo
T#:4347105
Part#: I-68-ER
Back Ordered
$ 1,935.00 USD
Only available at this price
Free Shipping
$ 1,935.00 USD
Only available at this price
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
Air Lift - Corporate Logo
T#:22591957
Part#: 27718
Back Ordered
$ 1,045.00 USD
Only available at this price
Free Shipping on orders $49 and up
$ 1,045.00 USD
Only available at this price
Free Shipping on orders $49 and up

Introducing the Air Lift Performance 3S Air Management Kit

The Air Lift Performance 3S is a groundbreaking air management kit that takes performance to the next level. This kit includes a manifold and a basic wiring harness, providing the flexibility to be installed in conjunction with separately purchased components. It is compatible with both 1/4” and 3/8” air lines, offering various kit versions to cater to different displays and switch boxes or exclusive use with the ALP3 app. Whichever version you choose, seamless integration with the ALP3 app is guaranteed.

Components to be purchased separately include:

  • Air springs
  • Water trap
  • Controllers (e.g., AVS switchbox)
  • Fittings/air lines
  • Compressor
  • Insulated copper wires in 10-, 12-, 18-, and 20-gauge
  • Tank wire, connectors, terminals, butt splices
  • Pressure switch fuse/holders
  • Relay
  • Schrader valve and blow-off valve

Additionally, there are versions of the 3S kit available with the Air Lift Performance V2 or ALP3 controller or just the smartphone app for added convenience.

Show More Show Less
APEX Wheels - Corporate Logo
T#:20320721
Part#: ARC81810H11D
Back Ordered
Starting at $ 1,676.00 USD
Only available at this price
Free Shipping
Starting at $ 1,676.00 USD
Only available at this price
Free Shipping
Shed weight and add style with APEX wheels! 18x10 ET25 18x11 ET44 APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10 lbs lighter or more! This reduces unsprung weight, and allows for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and perform at your best with plenty of confidence!
Show More Show Less

APEX Wheels - Corporate Logo
T#:20287708
Part#: SM10RS1895105
Back Ordered
Starting at $ 3,076.00 USD
Only available at this price
Free Shipping
Starting at $ 3,076.00 USD
Only available at this price
Free Shipping
APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence! Shed weight and add style with APEX wheels! 18x9.5 ET22 18x10.5 ET22
Show More Show Less

OTC - Corporate Logo
T#:3629276
Part#: OTC4645
Back Ordered
$ 244.99 USD
Only available at this price
Free Shipping
$ 244.99 USD
Only available at this price
Free Shipping
Release tension on belt
APEX Wheels - Corporate Logo
T#:20518649
Part#: EC7RS189535
Back Ordered
Starting at $ 2,876.00 USD
Only available at this price
Free Shipping
Starting at $ 2,876.00 USD
Only available at this price
Free Shipping
18x9.5 Et35 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!
Show More Show Less

APEX Wheels - Corporate Logo
T#:40342926
Part#: ARC8RT181011
Back Ordered
Starting at $ 2,796.00 USD
Only available at this price
Starting at $ 2,796.00 USD
Only available at this price
Apex ARC-8RT 18x10" ET25 & 18x11" ET44 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.
Show More Show Less
Hella - Corporate Logo
T#:367514
Part#: UN6208180
Back Ordered
$ 95.99

This product was last offered at the strikethrough price on
05-07-2026

$ 93.99 USD
Only available at this price
Free Shipping
$ 93.99 USD
Only available at this price
Free Shipping
Add additional lighting to your vehicle with these auxiliary lights. Add additional lighting to your vehicle with these auxiliary lights.

APEX Wheels - Corporate Logo
T#:555568
Part#: ARC81910ET25KT
Ships in 5 Business Days
$ 1,816.00 USD
Only available at this price
Free Shipping
$ 1,816.00 USD
Only available at this price
Free Shipping

APEX ARC-8 19" Staggered Wheel Set -- 19x9.5" / 19x10"

This set of 9.5" and 10" ARC-8 wheels is an easy staggered fitment for the F8X models. These are a direct fit with no spacers or fender rolling required. We use an 9.5" ET22 on the front and a 10" ET25 on the rear.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX Wheels - Corporate Logo
T#:18932318
Part#: VS5RS1795ET35BC
Ships in 5 Business Days
$ 709.00 USD
Only available at this price
Free Shipping
$ 709.00 USD
Only available at this price
Free Shipping
KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...
For Vehicles produced before 01/15 production date with EDC
KW Suspension - Corporate Logo
T#:206127
Part#: 352208AN
In Stock
$ 5,294.00 USD
Only available at this price
Free Shipping
$ 5,294.00 USD
Only available at this price
Free Shipping
Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track. KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times. Performance setup for the racetrack Height adjustable coilovers - Front - 15-40mm, Rear - 20-45mm Dampers in compression & rebound forces independently adjustable Use of high performance linear race springs: Front 575 lbs/inch, Rear 800 lbs/inch. Stainless steel technology "inox-line" Includes front camber plate mounts Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. EDC must be disabled using the KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC. Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below. KW Clubsport Development and Testing This item fits the following BMWs: 2015-1/2015 F80 BMW M3 2015-1/2015 F82 BMW M4
Show More Show Less
APEX Wheels - Corporate Logo
T#:20584622
Part#: EC7RS1910ST
Back Ordered
Starting at $ 3,516.00 USD
Only available at this price
Free Shipping
Starting at $ 3,516.00 USD
Only available at this price
Free Shipping
19x10 ET25 19x11 ET43/44 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!
Show More Show Less


Akrapovic - Corporate Logo
T#:9416023
Part#: DI-BM/CA/4PDK
Back Ordered
Starting at $ 1,931.99 USD
Only available at this price
Starting at $ 1,931.99 USD
Only available at this price
This rear carbon fiber diffuser will add to the style of your M vehicle, giving it a much sportier and aggressive appearance from the rear. The M3/M4 are great looking vehicles, nearly flawless, but there is always room for improvement! Made from high quality carbon fiber and built for a tight, stock-like fitment, this diffuser is the way to go when you want to add it by itself or when upgrading your exhaust system. This can help performance exhaust tips stand out even greater compared to the stock diffuser. Finish comes in either: High Gloss Matte
Show More Show Less
APEX Wheels - Corporate Logo
T#:19461796
Part#: SM101895H105RSKT
Back Ordered
$ 1,816.00 USD
Only available at this price
Free Shipping
$ 1,816.00 USD
Only available at this price
Free Shipping
Specifications: Color - Race Silver Size Front - 18x9.5" ET40 Size Rear - 18x10.5" ET42
APEX Wheels - Corporate Logo
T#:599192
Part#: ARC81910522HSKT
Back Ordered
$ 1,716.00 USD
Only available at this price
Free Shipping
$ 1,716.00 USD
Only available at this price
Free Shipping
Specifications: Color - Silver Size - 19x10.5" ET22

APEX Wheels - Corporate Logo
T#:31755201
Part#: ML10191025120RKT
Back Ordered
$ 3,556.00 USD
Only available at this price
$ 3,556.00 USD
Only available at this price

Permatex - Corporate Logo
T#:2928975
Part#: 20354
Back Ordered
$ 25.99

This product was last offered at the strikethrough price on
04-14-2026

$ 14.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 14.99 USD
Only available at this price
Free Shipping on orders $49 and up
Keep your brake contact points lubricated even under the most extreme conditions
APEX Wheels - Corporate Logo
T#:558587
Part#: SM101995ANKT
Ships in 5 Business Days
$ 1,976.00 USD
Only available at this price
Free Shipping
$ 1,976.00 USD
Only available at this price
Free Shipping

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

  • Enhanced strength and lightweight performance
  • Innovative Flow-formed semi-forging process
  • Average weight reduction of 10lbs or more
  • Ample room for brake systems
  • Classic motorsports design matches BMW's aggressive style
Show More Show Less

APEX Wheels - Corporate Logo
T#:31755200
Part#: ML10191025120AKT
Back Ordered
$ 3,556.00 USD
Only available at this price
$ 3,556.00 USD
Only available at this price
Dinan - Corporate Logo
T#:597795
Part#: D290-0803-BD
Back Ordered
11% off MSRP $ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Only available at this price
Free Shipping
11% off MSRP
$ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Only available at this price
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less

APEX Wheels - Corporate Logo
T#:599191
Part#: ARC81910522SBKT
Back Ordered
$ 1,876.00 USD
Only available at this price
Free Shipping
$ 1,876.00 USD
Only available at this price
Free Shipping
Specifications: Color - Satin Black Size - 19x10.5" ET22

APEX Wheels - Corporate Logo
T#:20551662
Part#: SM10199H95ST
Ships in 5 Business Days
Starting at $ 1,956.00 USD
Only available at this price
Free Shipping
Starting at $ 1,956.00 USD
Only available at this price
Free Shipping
Apex ARC8 19x9 ET28/30 19x9.5 ET22 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
Dinan - Corporate Logo
T#:598482
Part#: 0087-GA1R-SIL
Back Ordered
11% off MSRP $ 11,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9,899.99 USD
Only available at this price
Free Shipping
11% off MSRP
$ 11,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9,899.99 USD
Only available at this price
Free Shipping
These Dinan wheels are designed to get as much tire under your BMW as possible for optimal traction and look great doing it - all at a reasonable price. Designed to complement your BMW's natural good looks, these strong, light wheels will make a strong visual statement while improving handling.
Show More Show Less
APEX Wheels - Corporate Logo
T#:20287694
Part#: SM10189ET30
Back Ordered
Starting at $ 1,776.00 USD
Only available at this price
Free Shipping
Starting at $ 1,776.00 USD
Only available at this price
Free Shipping
Apex SM-10 18x9" ET30/31 18x10" ET25 Wheel Set . These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less


URO - Corporate Logo
T#:49300392
Part#: 194316170967
Back Ordered
New Item
$ 26.73 USD
Only available at this price
Free Shipping on orders $49 and up
$ 26.73 USD
Only available at this price
Free Shipping on orders $49 and up
Metal upgrade for failed OE plastic bracket
APEX Wheels - Corporate Logo
T#:20320731
Part#: SM10RS181011D
Back Ordered
Starting at $ 2,956.00 USD
Only available at this price
Free Shipping
Starting at $ 2,956.00 USD
Only available at this price
Free Shipping
Shed weight and add style with APEX wheels! 18x10" ET25 18x11" ET44 APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!
Show More Show Less