Performance Clutch Kits for BMW 4 Series F32 (2014+)

Clear BMW chassis

A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.

Sort By:

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

T#:640069

Part#: MS-006-076

Ships on Jan 29, 2027

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:209171

Part#: SB533F-2

In Stock

$ 979.00 USD

Add to Wish List

Qty

$ 979.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+ ...

T#:41931281

Part#: SB53A3STG3PKT

Back Ordered

$ 1,735.99 USD

Add to Wish List

Qty

$ 1,735.99 USD

Add to Wish List

For BMW owners demanding consistent performance, faster throttle response, and long-lasting clutch life, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 3+ delivers unmatched value and performance.

Show More Show Less

9" Performance Clutch Kit - Single Sprung Organic Disc

T#:17804815

Part#: XKBM24566-1A

Back Ordered

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

The XClutch 10 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. XClutch sprung organic kits offer excellent dampening and the highest levels of driveability in the range. They are ideal for performance street use. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 7/16" Clutch Disc Spline - 26 Disc Material - Organic Disc Type - Sprung Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Recessed Flywheel Step - -0.375 Assembly Weight Maximum Torque Capacity - 440 Recommended Use - Street Use Includes Single Mass Flywheel 1 Sprung Organic Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Project Cars

SELECT YOUR BMW

Performance Clutch Kits for BMW 4 Series F32 (2014+)

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+ ...

9" Performance Clutch Kit - Single Sprung Organic Disc

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results