BMW Fuel System Parts for BMW 3 Series F30 (2012+)

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Fuel-It! Bluetooth Flex Fuel Kit - B46/B48/B58

T#:21209854

Part#: FFK-B464858

Ships on Sep 22, 2026

Starting at $ 479.99 USD

Add to Wish List

Starting at $ 479.99 USD

Add to Wish List

If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Vargas HPFP Block-Off Plate - BMW B58 & S58

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Fuel Pressure Control Valve

T#:34616685

Part#: 13537801992

Ships in 1 Business Day

$ 246.99

This product was last offered at the strikethrough price on
04-10-2026

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

PFS Port Injection Kit - 900CC - BMW B58

T#:51813340

Part#: PFS-B58-PI-8

Ships in 10 Business Days

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

Hitachi Fuel Supply Module - BMW N20 N55 N26

T#:48850079

Part#: 16117243975

Ships in 6 Business Days

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

Delivers fuel from the tank to the engine.

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 2 ...

T#:13003684

Part#: BMWB58HPFPSTG2

Ships on Sep 22, 2026

$ 1,499.00 USD

Add to Wish List

Qty

$ 1,499.00 USD

Add to Wish List

Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware

Show More Show Less

High Pressure Fuel Pump (HPFP)

T#:23748108

Part#: 13517824477

Ships in 1 Business Day

$ 1,607.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1,479.99 USD

Add to Wish List

Qty

$ 1,479.99 USD

Add to Wish List

Genuine BMW Closure Ring - Multiple BMWs

T#:44344

Part#: 16117188565

Ships in 1 day

6% off MSRP $ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Qty

6% off MSRP

$ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Fuel tank closure ring.

Genuine BMW O-ring - 13517528408

T#:41853

Part#: 13517528408

Ships in 1 day

6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Qty

6% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Genuine BMW Base - 07147273549

T#:29859

Part#: 07147273549

Ships in 1 day

7% off MSRP $ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Qty

7% off MSRP

$ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Genuine BMW Base -
This item fits the following BMW Chassis:
F01,F02,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fuel Tank Base

T#:43975

Part#: 16111181918

Ships in 1 day

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Genuine BMW Base - L=100Mm
This item fits the following BMW Chassis:
E36 M3,E39 M5,E46 M3,E36,E38,E39,E46,E93,F30,F31,F32,F33,F34,F36

Genuine BMW Injector - 13537810702 - F25 - (NO LONGER AVAILABLE) ...

T#:205826

Part#: 13537810702

No longer available

Genuine BMW Injector -
This item fits the following BMW Chassis:
F25 X3

Genuine BMW High Pressure Fuel Pump - F30 F22 F23 F32 F33 G30 G01 ...

T#:528071

Part#: 13517642466

Ships in 1 day

4% off MSRP $ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

Fuel Pump - F02, F10, F15, F25, F30, F31

T#:187349

Part#: 16197351665

Ships in 1 day

6% off MSRP $ 869.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 816.99 USD

Add to Wish List

Qty

6% off MSRP

$ 869.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 816.99 USD

Add to Wish List

Genuine BMW Supply Module -
This item fits the following BMW Chassis:
F15,F25 X3,F30,F31

Fits BMW Engines including:
N57N

Genuine BMW Fuel pressure vavle - F30 328d 328d xDrive F31 328d xDriv...

T#:191317

Part#: 13537801992

Ships in 1 day

6% off MSRP $ 451.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 424.99 USD

Add to Wish List

Qty

6% off MSRP

$ 451.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 424.99 USD

Add to Wish List

Genuine BMW Pressure Regulating Valve -
This item fits the following BMW Chassis:
F15,F25 X3,F30,F31

Fits BMW Engines including:
N57N

Genuine BMW Exchange High Pressure Pump

T#:5788131

Part#: 13517824477

Ships in 1 day

4% off MSRP $ 2,067.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,974.99 USD

Add to Wish List

Qty

4% off MSRP

$ 2,067.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,974.99 USD

Add to Wish List

Part of the high pressure fueling system. Common failure point in the fueling system on diesel engines.

Genuine BMW Injector - 13538506548 - F15,F30,F31

T#:227409

Part#: 13538506548

Ships in 1 day

3% off MSRP $ 808.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 783.99 USD

Add to Wish List

Qty

3% off MSRP

$ 808.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 783.99 USD

Add to Wish List

Genuine BMW Injector -
This item fits the following BMW Chassis:
F15,F30,F31

Fits BMW Engines including:
N57N

Fuel Line - F30, F31

T#:191296

Part#: 16127244726

In Stock

6% off MSRP $ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Qty

6% off MSRP

$ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Genuine BMW Front Fuel Feed Line -
This item fits the following BMW Chassis:
F30,F31

Fuel Tank Ventilation

T#:51848518

Part#: 13907636156

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Genuine BMW Plastic Fuel Tank - 16117294609 - F30,F31

T#:187333

Part#: 16117294609

Ships in 1 day

3% off MSRP $ 1,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,160.99 USD

Add to Wish List

Qty

3% off MSRP

$ 1,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,160.99 USD

Add to Wish List

The BMW part number 16117294609 corresponds to a plastic fuel tank designed for certain diesel-engine BMW models, specifically the 3 Series variants produced between 2014 and 2018. This fuel tank is engineered to securely store diesel fuel and integrate seamlessly with the vehicle's fuel delivery system. Ensuring the fuel tank's integrity is vital for vehicle safety and optimal performance. Genuine BMW Plastic Fuel Tank - This item fits the following BMW Chassis: F30,F31

Show More Show Less

Genuine BMW High Pressure Fuel Pump with Fuel Filter - N55 - 135i, 33...

T#:199550

Part#: 13518604231

Ships in 1 day

4% off MSRP $ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N55 turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
3/2012-2013 E82 BMW 135i 135is
2014+ F22 BMW M235i M235i xDrive
2014+ F23 BMW M235i
3/2012-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
3/2012-2013 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
3/2012-+ F07 BMW 535i GT, 535i xDrive GT
3/2012-3/2012+ F10 BMW 535i 535i xDrive
3/2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
3/2012-+ F01 BMW 740i 740li 740li xDrive
2013+ E84 BMW X1 xDrive35i
4/2012-2013 E70 BMW X5 xDrive35i
4/2012-2013 E71 BMW X6 xDrive35i br>2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
4/2012+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i

Show More Show Less

Genuine BMW Fuel Injector Kit

T#:5175711

Part#: 13538625396KT

Ships in 1 day

$ 2,398.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,389.99 USD

Add to Wish List

Qty

$ 2,389.99 USD

Add to Wish List

Genuine BMW Fuel Injector Replacement Kit - BMW B58 3.0L (Gen1 B58 / ...

T#:50031892

Part#: B58AFIRKT

Ships in 1 day

$ 2,297.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,288.99 USD

Add to Wish List

Qty

$ 2,288.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Genuine BMW Fuel Injector Replacement Kit - BMW B46/B48 2.0L (Gen1 B4...

T#:50031890

Part#: B48AFIRKT

Ships in 1 day

$ 1,530.99

This product was last offered at the strikethrough price on
08-07-2026

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Fuel Tank Breather Line - F30, G30

T#:549953

Part#: 13907643104

Ships in 1 day

4% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

Qty

4% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

AN 6 Fuel Lines With Ethanol Sensor Connections - F2x/F3x B58 ...

T#:11399222

Part#: 201-0214

Ships in 5 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004857

Part#: 201-0260

Ships in 5 Business Days

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 55% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Black Market Parts Universal Fuel Pump Wiring Kit

T#:38195421

Part#: 601-0054

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Black Market Parts Universal Fuel Pump Wiring Kit is a one-stop shop solution for anyone looking to add an additional fuel pump to their fuel tank. This compact kit provides 6 inches of 100% E85 compliant 12 gauge wiring so you don't have to buy complete spools of wire just to get the little wire you need to extend the pump harness. The kit also includes all hardware for bulk head style pass-through for power used by pump manufacturers around the world. Full stainless bulk head power posts make it easy to add pass-through power to any fuel pump

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679243

Part#: 501-0116

Ships in 7 Business Days

$ 884.99 USD

Add to Wish List

Qty

$ 884.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold

T#:27171924

Part#: BMSB58G1-PRM

Ships in 8 Business Days

Starting at $ 3,158.00 USD

Add to Wish List

Starting at $ 3,158.00 USD

Add to Wish List

Add more fuel via port Injection while increasing airflow in your Gen 1 B58 Powered BMW When it comes to intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your weak factory plastic B58 manifold with a direct fit high flow high strength aluminum manifold. Features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion vacuum ports perfect for gauges, BOV references, or Hobbs switches. Includes high-quality o-rings and all required hardware. Your factory high-quality intercooler core slides right in. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or ala-cart without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options. For most 700-800whp applications we suggest the 750cc injectors, while the 550cc injectors are suitable for applications below 700whp. This kit includes a FREE $99.00 Burger Motorsports B58 Phenolic Thermal Intake Manifold Spacer FEATURES AND BENEFITS Increased flow Integrated top mount port injection bungs Much stronger than stock Looks amazing under the hood Lightweight aluminum construction All factory connections Extra ports for a BOV, Hobb's switch, or boost gauge Includes upgraded high-temperature o-rings Optional Motiv Reflex + Injector Controller Optional Injector Block Off Plugs Optional Deasthwerks 1000cc Injectors

Show More Show Less

PTFE AN6 Fitting To 3/8" Female QC With 1/8"NPT Port

T#:38094324

Part#: 201-0229

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N20/N26 2.0...

T#:38262761

Part#: 601-0167

Ships in 9 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 750cc* injectors (this flow rate is based on industry injector flow test pressure of 43.5psi). These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

Starting at $ 9.99 USD

Add to Wish List

Starting at $ 9.99 USD

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

Swivel Fuel Line Fitting AN6 PTFE To AN6 ORB

T#:38094346

Part#: 201-0175

Ships in 9 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Upgrade your fluid system with a reliable, Precision Raceworks AN-6 PTFE fitting to AN-6 ORB, designed for maximum efficiency and ease of installation.

Double Female 90 Degree 9.89 QC

T#:38094349

Part#: 201-0230

Ships in 9 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.

Precision Raceworks - Dummy Ethanol Sensor 3/8" Male QC To 3/8" Male ...

T#:38094347

Part#: 201-0232

Ships in 9 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Whether upgrading your fuel system for performance or simply eliminating unnecessary components, this fitting provides an efficient and reliable way to enhance your fuel delivery setup by removing your ethanol sensor

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N20/...

T#:38262762

Part#: 601-0267

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant (other than injectors). Simply pick up this kit and pair it with your favorite injectors and injector controller and you are ready to go!

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks Universal AN8 ORB To AN6 Male Flare Adapter ...

T#:38161738

Part#: 201-0331

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

Precision Raceworks High Performance Fuel Pump Kit - Stage 3.5 - BMW ...

T#:38195443

Part#: 601-0123

Ships in 9 Business Days

$ 984.99 USD

Add to Wish List

Qty

$ 984.99 USD

Add to Wish List

The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3 .5 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 450 (F90000274) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support 950whp (Rated for 875whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket, and close the top hat - you are ready to go!

Show More Show Less

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

T#:38094332

Part#: 201-0264

Ships in 9 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

45 Degree Fuel Line Fitting PTFE To Female Flare AN6

T#:38094333

Part#: 201-0231

Ships in 9 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Whether you're modifying your fuel lines for increased horsepower, adding a secondary fuel system, or upgrading to a more efficient setup, this 45-degree plug-and-play PTFE fitting delivers unmatched performance, easy installation, and rock-solid reliability.

Show More Show Less

9.49 (3/8") PTFE AN6 90 Degree Fitting To Female QC

T#:38094339

Part#: 201-0227

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.

90 Degree Fitting PTFE AN6 To 9.89 Female QC

T#:38094334

Part#: 201-0233

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect is designed for seamless fuel system integration, featuring a durable air-hose-style quick-release for secure, leak-free connections in high-performance applications.

Show More Show Less

Precision Raceworks PTFE Fuel Line Fitting - AN-6 To 7.89mm Female QC...

T#:38094320

Part#: 201-0178

Ships in 9 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0

Show More Show Less

Precision Raceworks Universal AN8 Male ORB To AN6 Female ORB Adapter ...

T#:38161735

Part#: 201-0404

Ships in 4 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Use this adapter to convert your AN8 fuel rail to AN6 female ORB with this helpful fitting!

AN6 Female To AN6 Female Adapter

T#:38094328

Part#: 201-0266

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

The Precision Raceworks AN6 Female to AN6 Female Adapter is a durable fitting designed to join two AN6 fittings with female threads. It ensures a secure, leak-proof connection, making it perfect for fluid and fuel systems where a smooth, reliable link is needed. This adapter is commonly used to extend hose lengths or adjust configurations while keeping the same AN6 size.

Show More Show Less

AN6 Male Flare/ORB To 3/8" Female Quick Connect

T#:38094330

Part#: 201-0206

Ships in 9 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 3/8" Female Quick Connect is a premium fitting designed for fluid and fuel systems. The AN6 male flare/ORB fitting ensures a secure, leak-proof connection with an O-ring boss design. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, making it perfect for high-performance setups that require both reliability and quick access.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW 3 Series F30 (2012+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results