Vargas Turbo Technologies for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships on Sep 21, 2026
$ 1,258.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships on Sep 21, 2026
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Vargas Turbo Technologies - Corporate Logo
T#:390263
Part#: VTTN20-350
Ships on Sep 21, 2026
Starting at $ 1,977.00 USD
Free Shipping
Starting at $ 1,977.00 USD
Free Shipping

Vargas Stage 1 N20 turbo upgrade is good up to 350whp with proper tuning and high grade fuel. Vargas N20 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N20.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 350. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122282
Part#: TRIPLECAPBLUE1
In Stock
$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD
Limited Qty Sale
Free Shipping
$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD
Limited Qty Sale
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530033
Part#: COOLANTCAPBLK
Back Ordered
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:4921509
Part#: VTT-B58-HOOK
Ships in 2 Business Days
$ 15.99 USD
Free Shipping
$ 15.99 USD
Free Shipping
Vargas' engine lifting hook designed to help those needing BMW's engine lifting tab but at less cost and less wait time. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models. Note: Fitment for S58 has not yet been confirmed.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships on Sep 21, 2026
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Vargas Turbo Technologies - Corporate Logo
T#:3658005
Part#: B58BLTVLVCVR
Ships in 10 Business Days
Starting at $ 1,763.99 USD
Free Shipping on orders $49 and up
Starting at $ 1,763.99 USD
Free Shipping on orders $49 and up
Introducing Vargas Turbo's B58 Gen 1 Billet Valve cover. VTT created these for the B58 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. Vargas Turbo Technologies recommends running it with their B58 engine catch can kit (See listing options). VTT offers a number of breather choices for extra crankcase venting including our billet oil cap breather, as well as their one-way Stainless breathers.
Show More Show Less

PFS Port Injection Kit - B58
Aftermarket charge pipe required
Vargas Turbo Technologies - Corporate Logo
T#:5663657
Part#: PFS-B58-PI
Ships in 10 Business Days
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller
Vargas Turbo Technologies - Corporate Logo
T#:4921504
Part#: VTT-HH-RED-BOTH
Ships on Sep 21, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:6151361
Part#: B58MODINTAKECONE
Ships on Sep 21, 2026
$ 556.99 USD
Free Shipping
$ 556.99 USD
Free Shipping
VTT is proud to announce the BMW F-Series B58 intake system! They COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, and all of the restrictive bends. They then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with their billet intake connection for an OEM-like fit, and finish. This hose is paired with VTT's 4" high-flow cotton pre-oiled cone filters. Made from 100% carbon, not a single layer is wrapped over plastic. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. Features: NOTE: The Cone filter intake kit is legal for RACING USE ONLY in California. Always follow all local emissions rules. (See ES4488513 for VTT's 50-State legal intake kit) Easy to install in 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow Completely reversible if you ever want to remove
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:4921508
Part#: VTT-HH-BLK-B58
Ships on Sep 21, 2026
$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:4921507
Part#: VTT-HH-BLUE-B58
Ships on Sep 21, 2026
$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:20749254
Part#: VTT-DHPLS
Ships on Sep 21, 2026
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:4921479
Part#: VTT-HH-BLUE-BOTH
Ships on Sep 21, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:4921506
Part#: VTT-HH-BLK-BOTH
Ships on Sep 21, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122276
Part#: VTTPSCAPCLR1
Ships on Sep 21, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap. This cap does away with the weak plastic cap while adding some pop and color to your engine bay. These Power Steering caps retain ALL of the factory provisions including dipstick, and vent hole. Vargas Turbo also designed these caps to complement their N5X Billet Oil caps and N5XBillet Oil filter Caps caps so all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:4921505
Part#: VTT-HH-RED-B58
Ships on Sep 21, 2026
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5309601
Part#: VTT-COIL-B58-BLK
Ships on Sep 21, 2026
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52164934
Part#: VTT-PS-CAP-BLK-1
Ships on Sep 21, 2026
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The VTT Billet Power Steering Cap is the definitive upgrade for BMW owners looking to eliminate the weakest link in their engine bay's fluid system.

Vargas Turbo Technologies - Corporate Logo
T#:51672724
Part#: VTT-X58-HPFP-BLO
Ships on Sep 21, 2026
New Item
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.
Vargas Turbo Technologies - Corporate Logo
T#:51672705
Part#: VTT-S/B58-LP-CC-
Ships on Sep 21, 2026
New Item
$ 41.99 USD
Free Shipping
$ 41.99 USD
Free Shipping
The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.
Vargas Turbo Technologies - Corporate Logo
T#:51918855
Part#: VTT-HHREDLONG
Ships on Sep 21, 2026
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Designed for the high-volume BMW specialist, the VTT "Head Handler" eliminates the struggle and risks associated with manually lifting heavy cylinder heads.


Vargas Turbo Technologies - Corporate Logo
T#:52094591
Part#: VTT-FAB-062
Ships on Sep 21, 2026
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.
Vargas Turbo Technologies - Corporate Logo
T#:398016
Part#: VTT-FLNG-1
Ships on Sep 21, 2026
$ 393.99 USD
Free Shipping
$ 393.99 USD
Free Shipping

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51848504
Part#: VTT-B58-CEBLUE
Ships on Sep 21, 2026
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
Elevate your BMW's engine bay while safeguarding your cooling system with the VTT B58 Expansion Tank Hose in Blue.

Vargas Turbo Technologies - Corporate Logo
T#:52094552
Part#: VTT-DCS-EWG-W-AC
Ships on Sep 21, 2026
New Item
$ 1,049.99 USD
Free Shipping
$ 1,049.99 USD
Free Shipping
the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Turbo Technologies - Corporate Logo
T#:51848522
Part#: VTT-B58-FLTRR
Ships on Sep 21, 2026
New Item
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The VTT High-Performance Drop-In Air Filter is the ultimate "OEM+" upgrade for BMW F-Series owners looking to unlock the breathing potential of the B58 engine.
Vargas Billet HMM Delete Kit - BMW B58TU
Fits all B58 TU / Gen 2 B58 engines
Vargas Turbo Technologies - Corporate Logo
T#:51672725
Part#: VTT-B58-COOLING-
Ships on Sep 21, 2026
New Item
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
The VTT Billet B58 HMM Delete is for enthusiasts who want to remove the bulky, plastic factory coolant unit in favor of a robust, motorsport-oriented setup.

Vargas Turbo Technologies - Corporate Logo
T#:51778130
Part#: VTT-BMW-DAMPER-B
Ships on Sep 21, 2026
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.
Vargas Turbo Technologies - Corporate Logo
T#:49822558
Part#: VTTB58CHECK
Ships on Sep 21, 2026
New Item
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:41695014
Part#: VTTS55BILLETVCRE
Ships on Sep 21, 2026
$ 1,519.99 USD
Free Shipping
$ 1,519.99 USD
Free Shipping
Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.
Show More Show Less

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...
For vehicles with VTT Modular PCV/Catch Can Systems
Vargas Turbo Technologies - Corporate Logo
T#:52270288
Part#: OCC1DUADRAVAL
Ships on Sep 21, 2026
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.
VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...
For vehicles with VTT Billet & Cast Valve Covers
Vargas Turbo Technologies - Corporate Logo
T#:52270290
Part#: OC16OADAPSC
Ships on Sep 21, 2026
New Item
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
Vargas Turbo Technologies - Corporate Logo
T#:52094551
Part#: VTT-DCS-EWG-ONLY
Ships on Sep 21, 2026
New Item
$ 839.99 USD
Free Shipping
$ 839.99 USD
Free Shipping
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.


Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships on Sep 21, 2026
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.
Vargas Turbo Technologies - Corporate Logo
T#:51848505
Part#: VTT-B58-CFHKRED
Back Ordered
New Item
$ 559.99 USD
Free Shipping
$ 559.99 USD
Free Shipping
Protect your investment with the VTT Full Coolant Hose Upgrade Kit, specifically engineered for the BMW B58 engine.
Vargas Turbo Technologies - Corporate Logo
T#:51778122
Part#: VTT-B58-OIL-COOL
Ships on Sep 21, 2026
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
The VTT Billet B58 Remote Oil Cooler Adapter is an ideal upgrade for B58-powered platforms.

Vargas Turbo Technologies - Corporate Logo
T#:52094563
Part#: VTT-FAB-040-AN
Ships on Sep 21, 2026
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

Vargas Turbo Technologies - Corporate Logo
T#:52094555
Part#: VTT-FAB-015
Ships on Sep 21, 2026
New Item
$ 21.99 USD
Free Shipping
$ 21.99 USD
Free Shipping
The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.
Vargas Turbo Technologies - Corporate Logo
T#:51813310
Part#: VTT-FAB-HC
Ships on Sep 21, 2026
New Item
$ 49.99 USD
Free Shipping
$ 49.99 USD
Free Shipping
Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

Vargas Turbo Technologies - Corporate Logo
T#:51848499
Part#: VTT-B58-BVC-GOLD
Ships on Sep 21, 2026
New Item
$ 1,879.99 USD
Free Shipping
$ 1,879.99 USD
Free Shipping
The VTT B58 Gen 1 Billet CNC Valve Cover in Gold is the ultimate functional upgrade for the BMW B58 engine.
Vargas Turbo Technologies - Corporate Logo
T#:51883678
Part#: VTT-B58-MISST
Ships on Sep 21, 2026
New Item
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
The Vargas B58 Modular Intake System is engineered to unlock the breathing potential of your BMW F-Series engine.

Vargas Turbo Technologies - Corporate Logo
T#:51918853
Part#: VTT-HHBLKLONG
Ships on Sep 21, 2026
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas Billet "Head Handler" is the ultimate solution for BMW technicians and enthusiasts who frequently handle heavy cylinder heads.

Vargas Turbo Technologies - Corporate Logo
T#:51672701
Part#: VTT-EXTENDED-STU
Ships on Sep 21, 2026
New Item
$ 3.99 USD
Free Shipping
$ 3.99 USD
Free Shipping
The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.
Vargas Turbo Technologies - Corporate Logo
T#:51918869
Part#: VTT-INSERT-6
Ships on Sep 21, 2026
New Item
$ 474.99 USD
Free Shipping
$ 474.99 USD
Free Shipping
The Vargas Billet Motor Mount Insert Kit is for BMW owners who want to eliminate the factory engine movement without the vibrations of a solid mount.
Vargas Turbo Technologies - Corporate Logo
T#:51883674
Part#: VTT-B58-MISGC
Ships on Sep 21, 2026
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
The VTT B58 Intake Hose is the ultimate solution for BMW owners looking to eliminate the restrictive factory intake without a full airbox replacement.


Vargas Turbo Technologies - Corporate Logo
T#:51848508
Part#: VTT-B58-LRHBLK
Ships on Sep 21, 2026
New Item
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping
The VTT Billet/Silicone Lower Radiator Hose is a professional-grade replacement for the factory B58 Gen 1 lower radiator line.
Vargas Turbo Technologies - Corporate Logo
T#:51918854
Part#: VTT-HHBLULONG
Ships on Sep 21, 2026
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas Head Handler provides maximum versatility, specifically catering to those who need to remove/install a cylinder head with the camshafts in place.