BMW Intake Parts for BMW 2 Series F22 (2014+)

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified. 

The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit.  With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced.  You will have full hard piping throughout your system.

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Features:

• Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
• Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
• Cast end tanks for improved durability and internal flow characteristics.
• Brush finish standard
• Optional Polished finish available.
• Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping.  Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
• Features the factory style connectors.  Fully compatible with factory piping or aftermarket piping utilizing factory style connectors.  Compatible with our charge pipe upgrade kit.
• Maintains ALL factory components.  No modifications required.  100% bolt on.
• Includes all hardware needed to install.
• Developed and tested for over a year under the harsh conditions of racing.
• Limited Lifetime Warranty.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified. 

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Features:

• Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
• Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
• Cast end tanks for improved durability and internal flow characteristics.
• Brush finish standard
• Optional Polished finish available.
• Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping.  Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
• Features the factory style connectors.  Fully compatible with factory piping or aftermarket piping utilizing factory style connectors.  Compatible with our charge pipe upgrade kit.
• Maintains ALL factory components.  No modifications required.  100% bolt on.
• Includes all hardware needed to install.
• Developed and tested for over a year under the harsh conditions of racing.
• Limited Lifetime Warranty.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX 
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX 
2015+ F36 4 Series Gran Coupe 428i 428iX 

Upgrade your BMW B58 engine with the CTS Charge Pipe Upgrade Kit, replacing the prone-to-failure plastic OEM charge pipe at stock boost levels. This kit not only ensures OE fitment but also provides more power and peace of mind at any boost level. Experience increased flow, improved reliability, enhanced throttle response, and reduced turbo lag with the CTS charge pipe kit.

• Replaces prone-to-failure OEM charge pipe
• Suitable for stock boost levels
• More power and OE fitment
• Increased flow for enhanced engine performance
• Improved reliability for peace of mind
• Enhanced throttle response
• Decreased turbo lag

Amplify your driving experience with heightened turbo/induction sound, along with increased air flow, throttle response, and overall performance.

Discover a whole new driving experience, complete with captivating induction sounds, heightened throttle response, and noises you have not yet heard from your turbo. Unleash the full potential of your turbo and engine by ditching the restrictive enclosed intake box. The factory intake is no match for your N55 paired with the Luft-Technik Intak Intake.

It is important to highlight the distinctive dual-cone filter design, featuring a standard conical shape with a smaller inverted cone in the center. This configuration produces an exhilarating sound when lifting off the throttle. The airflow pattern as air exits the filter creates a unique turbo flutter sound, adding to the excitement of the driving experience.

The stock intake box, often labeled as a muffler/silencer, is engineered to dampen induction noise for a more refined ride. However, as enthusiasts, we crave the exhilarating sound of our induction as we accelerate. Our ECS intake is tailored for enthusiasts who seek a heightened driving experience. Crafted with function in mind, it features a silicone coupler, rotomolded inlet tube, heat shield, and filter, seamlessly integrating with the OE fresh air scoop and utilizing stock mounting locations. Experience enhanced performance and a renewed passion for driving with the ECS Luft-Technik Intake for your N55.

Key benefits:

Increased induction noise
Enhanced throttle response
+7 WHP / +14 FT-LBS TQ(peak gains) and +12 WHP / +15 FT-LBS (max gains)
Free-flowing for decreased strain on the turbo
Unique sounds from the dual-cone filter
Factory MAF scaling
Mounts to factory locations
Online installation instructions
Design:

Durable, lightweight 5052 heat-shield, finished in wrinkle black powder coat
4 Ply silicone coupler
Billet aluminum MAF flange
Rotomolded intake tube with smooth internal tubing for uninterrupted flow
Installs in front of the factory cold air duct
Kit Contents:

Silicone turbo coupler
Rotomolded inlet tube
Powder coated heatshield
Dual cone filter
Seals, clamps and hardware for installation