BMW Tools & Specialty Equipment for BMW 2 Series F22 (2014+)

CTA Tools - Spark Plug Gapper is an essential tool for accurately setting and measuring spark plug gaps, ensuring optimal engine performance. This precision tool is designed for both professional and DIY mechanics, providing reliable gap adjustments for a variety of engine applications.

• Versatile Measurement Range: The ramp gauge measures gaps from .020 to .100 inches (0.50 to 2.5 mm), accommodating a wide range of spark plug specifications.
• Precision Engineering: Engineered to deliver accurate gap settings, improving engine efficiency and performance.
• Made in the USA: Crafted with high-quality materials to ensure durability and long-lasting performance.
• Easy to Use: Simple design makes gap adjustments quick and straightforward, enhancing convenience in any workshop or garage setting.

Upgrade your toolset with the CTA Tools - Spark Plug Gapper to achieve precise spark plug gaps and optimize your engine’s performance.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!

The GENIUSPRO25 is a fully-automatic professional smart charger, maintainer, power supply, and battery desulfator designed for 6-volt, 12-volt, and 24-volt systems. With temperature compensation and a 25-amp rating, it's suitable for all types of automotive, marine, and deep-cycle batteries.

Features:

• The all-new GENIUSPRO25 - Similar to our G15000, just more powerful. With the greatest performance and functionality yet, it's a world-class battery charger to let professionals push the limits at incredible charging speeds.
• Do more with Genius - A multi-voltage charger - 6-volt (25-amps), 12-volt (25-amps), and 24-volt (12.5-amps) - for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion.
• Engineered for pros - Designed for pros who need absolute performance and uncompromising functionality. Featuring ultra-flexible silicone cabling - down to -40ºC - with protective nylon breaded shielding for maximum protection against abrasion.
• Progressive power supply - A dual-voltage power supply - 12-volt (25-amp) and 24-volt (12.5-amp) - to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing.
• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates to maximize battery life and enable fast charging.
• Charge dead batteries - Detects batteries as low as 1-volt. Or use the all-new force mode that allows you to manually begin charging dead batteries down to zero volts.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program

The 6 Piece 3/8” Drive Ratcheting Flare Nut Wrench Set by VIM Tools is designed for professionals who need precision and efficiency when working with brake, hydraulic, gas, and refrigeration lines, as well as oxygen sensors.

Constructed from durable chrome vanadium, these wrenches feature spring-loaded serrated jaws and a quick-clamp mechanism, ensuring a secure grip and smooth ratcheting action. The unique design allows the jaws to lock in an open position, making it easy to maneuver around lines, while the serrated jaws provide six contact points for optimal grip, even on damaged fasteners.

Perfect for tight spaces, this set is packaged in a premium EVA foam tray and comes with a lifetime warranty, making it a valuable addition to any toolbox.

Key Features:

• Versatile Application: Ideal for brake, hydraulic, gas, and refrigeration lines, oxygen sensors, and more.
• Spring-Loaded Serrated Jaws: Provide six contact points for a secure grip and prevent fastener rounding.
• Quick-Clamp Operation: Allows for one-handed use with automatic closing upon contact with the fastener.
• Ratcheting Functionality: Jaw repositions smoothly when turned counterclockwise, enabling efficient work in tight spaces.
• Durable Construction: Made from chrome vanadium for long-lasting performance.
• Premium Packaging: Comes in an EVA foam tray for organized storage and includes a lifetime warranty.

Includes:

• 8mm & 5/16"
• 10mm
• 11mm & 7/16"
• 12mm
• 13mm & 1/2"
• 14mm