Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

• Engine overheating or failing to reach operating temperature
• Water pump running intermittently or erratically
• Cooling fans operating at maximum output
• Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

• Seven Liters of BMW Synthetic Engine Oil
• Engine Oil Filter
• Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Upgrade Your BMW's Wheel Change Process with a Stud Conversion

Optimize your BMW's wheel change process with a stud conversion kit, delivering faster and simpler wheel swaps. This kit consists of Conical Seat Lug Nuts (20) and 82mm Wheel Studs (20), providing permanent wheel hangers, saving time, and streamlining the process.

• Permanent wheel hangers for quick and hassle-free wheel changes
• Simplifies the wheel installation process compared to wheel bolts
• Accommodates various spacer widths for added versatility
• Reduces wear on wheel hubs, enhancing longevity
• Facilitates quick and easy tire changes and removal

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 20mm.

ECS Titanium Wheel Bolts

Upgrade your BMW's performance with ECS Titanium Wheel Bolts, designed for weight savings and durability. These premium bolts are perfect for performance enthusiasts seeking high-quality components that won't rust. Crafted from annealed titanium alloy, they offer a significant weight reduction of 50% compared to steel bolts of the same size, reducing rotational mass for improved performance.

Benefits:

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for exceptional strength and durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• Rust-resistant construction ensures long-lasting performance
• Compatible with BMW and other vehicles with 14mm diameter, 1.25mm thread pitch, and 17mm head size

Upgraded replacement for your crankcase vent hose P#11127584128 featuring upgraded silicone, stainless steel clamps, and new OE connectors and seals.

Enhance your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Arrives preassembled with new OE fittings and seals
Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Tuning Silicone CCV Hose today!

Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Facilitates quick and easy wheel changes
• Offers a secure and reliable wheel mounting solution
• Minimizes the risk of lug bolt stripping
• Compatible with various BMW models

Upgrade your BMW's performance with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit is designed to facilitate quick and easy wheel changes, offering a secure and reliable wheel mounting solution. By minimizing the risk of lug bolt stripping, it ensures a safer driving experience. Plus, it is compatible with various BMW models, providing versatility and ease of installation.

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Turner Motorsport Replacement Air Filter Element

Discover superior airflow and filtration efficiency with the Replacement Air Filter Element from Turner Motorsport. Engineered for use in various Turner Motorsport Luft-Technik or Kohlefaser Luft-Technik intake systems, this custom-spec'd air filter delivers optimal performance.

Benefits:

• High-flow design for optimal airflow
• Reusable cotton gauze construction
• Precision engineering and testing by Turner Motorsport
• FARO laser scanning, SolidWorks 3D CAD modeling, and in-house 3D printing for quality assurance
• In-house Superflow SF-750 Flowbench tested for 475 CFM at 10" H20
• Dimensions: Flange ID - 3.125", Flange Height - 1.50", Base OD - 5.0", Filter Height - 7.0", Top OD - 4.5"

Upgrade your air filtration system with the Turner Motorsport Replacement Air Filter Element, meticulously designed for performance and longevity.

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

• High-quality silicone couplers and elbows for BMW projects
• Precision-engineered for reliability and performance
• Versatile solution for intercooler installations, custom intake systems, and more
• Ensures durability and longevity for your automotive projects

Wheel Stud Conversion Kit - Half Set: Upgrade Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Enhance your BMW's performance with the Wheel Stud Conversion Kit - Half Set. This kit facilitates easier and quicker wheel changes while offering a more secure and reliable wheel mounting solution compared to traditional lug bolts. By reducing the risk of stripped lug bolts, it ensures a safer driving experience for BMW owners. Plus, it is compatible with various BMW models, ensuring versatility and ease of installation.