BMW Brakes & Brake Parts for BMW X Series F15 (2014+)

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2007-2017 E70 F15 BMW X5 35d/dx/ix 48i 40ex

2008-2017 E71 F16 BMW X6 35ix

500ml HP600 Race Brake Fluid is specifically formulated to deliver superior performance under extreme racing conditions, where braking systems must endure very high temperatures without failure. This premium DOT 4 brake fluid from Hawk Performance exceeds OE specifications and offers exceptional stopping power and reliability.

• Premium DOT 4 Fluid: Surpasses OEM specifications for enhanced performance.
• High Boiling Points: Minimum dry boiling point of 572°F (300°C) and wet boiling point of 383°F (195°C) ensure optimal performance under extreme conditions.
• Race-Ready: Designed for high-performance racing applications, delivering consistent braking power.
• Enhanced Safety: Higher dry boiling point reduces the risk of brake fluid vaporization, providing reliable stopping power.

For racers and high-performance driving enthusiasts, this brake fluid is essential for maintaining optimal braking performance and safety.

Upgrade your BMW's braking system with this Brembo replacement rotor pair from Turner Motorsport, a reputable company with over 40 years of expertise in brake component manufacturing. Brembo is synonymous with quality, ensuring these rotors deliver stock-like performance for your vehicle.

Benefits:

• Includes rotors for both front axles, providing complete replacement coverage
• Set screws included for hassle-free rotor attachment to the hub
• Explore our range of performance and OEM brake pads for a comprehensive brake job
• Visit our tool section for the essential tools needed to facilitate a smooth brake replacement process
• Refer to the Brake Pad Bedding DIY guide at the bottom of this page for optimal pad and rotor performance

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

• High performance for street use
• Excellent friction/torque at various temperatures
• Great feel and modulation
• Low noise
• Low-medium dust
• rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

This item fits the following BMWs:

2007-2013 E70/E71 BMW X5 X6  x30i x35d x35i

2014+ F15/F16 BMW X5 X6 s35i s35d x35i