BMW Intake Parts for BMW 7 Series F01 (2009+)

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 18, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

Hobb's Switch

T#:403482

Part#: ACC-HOBBS

Ships on Sep 21, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

In Stock at Vendor

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

Snow Performance Boost Cooler Stage 2 Direct Port Water/Methanol Inje...

T#:589550

Part#: SNO-2169-BRD

In Stock at Vendor

$ 1,503.99 USD

Add to Wish List

Qty

$ 1,503.99 USD

Add to Wish List

Direct-port injection is the optimal way to run water/methanol and this kit will provide optimal, uniform placement for all six injectors.

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 21, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...

T#:21308451

Part#: 40069-2

In Stock

$ 742.99 USD

Add to Wish List

Qty

$ 742.99 USD

Add to Wish List

Direct port injection plate with 1.5GPH nozzles for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

Genuine BMW Vacuum tank

T#:37039

Part#: 11657605374

In Stock

4% off MSRP $ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Qty

4% off MSRP

$ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Genuine BMW Vacuum Tank -
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N63,N63N,S63N

Throttle Housing Assembly

T#:14925

Part#: 13547555944

Ships in 1-2 days

6% off MSRP $ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD

Add to Wish List

Qty

6% off MSRP

$ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD

Add to Wish List

Genuine BMW Throttle Housing Assy
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N51,N63,N63N,S63,S63N

Show More Show Less

Return Hose - F01, F02, F06, F07, F10, F12, F13, F15, F16

Zyl. 5-8

T#:183188

Part#: 11537615492

Ships in 1-2 days

9% off MSRP $ 135.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD

Add to Wish List

Qty

9% off MSRP

$ 135.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD

Add to Wish List

Genuine BMW Return Hose - Zyl. 5-8
This item fits the following BMW Chassis:
F06,F12,F13,F15,F16

Fits BMW Engines including:
N63N

Air Intake Tube - Right - Blue - F01, F02

T#:68260

Part#: 37206789168

Ships in 1-2 days

6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Qty

6% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Genuine BMW Air Intake Tube Right - Blau
This item fits the following BMW Chassis:
F02

Air Channel - F01, F02, F06, F07, F10, F12, F13

T#:43299

Part#: 13717577472

Ships in 1-2 days

2% off MSRP $ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

2% off MSRP

$ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Genuine BMW Air Channel - 1-4
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N63,N63N

Genuine BMW Rubber Boot - N63 4.4L

T#:43289

Part#: 13717577460

Ships in 1-2 days

$ 24.50 USD

Add to Wish List

Qty

$ 24.50 USD

Add to Wish List

Genuine BMW Rubber Boot - 1-4
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N63,N63N

Air Channel - F01, F02, F06, F07, F10, F12, F13

T#:43318

Part#: 13717582310

Ships in 1-2 days

2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Add to Wish List

Qty

2% off MSRP

$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Add to Wish List

Genuine BMW Air Channel -
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N54,N55

Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L ...

T#:34987

Part#: 11417516128

In Stock

3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Qty

3% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Crank Case Vent Hose

T#:31524

Part#: 11127590163

Ships in 1-2 days

4% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Qty

4% off MSRP

$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Genuine BMW Vent Hose -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F06,F15,F16

Fits BMW Engines including:
N55

Genuine BMW Intake Duct - Turbocharger to Intercooler - Cylinders 5-8...

Includes clamp to intercooler. ¦ Left

T#:43276

Part#: 13717575407

Ships in 1-2 days

6% off MSRP $ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.99 USD

Add to Wish List

Qty

6% off MSRP

$ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.99 USD

Add to Wish List

Genuine BMW Charge Air Line - 5-8
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N63,N63N

Show More Show Less

Genuine BMW Gasket Ring - 13712247398 - E82,E89,E90,E92,E93

T#:43058

Part#: 13712247398

In Stock

5% off MSRP $ 45.56

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.39 USD

Add to Wish List

Qty

5% off MSRP

$ 45.56

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.39 USD

Add to Wish List

Seals the intake pipe.

Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T

Show More Show Less

N55, S63 Electric Turbo Diverter Valve

T#:37034

Part#: 11657601058

In Stock

6% off MSRP $ 217.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD

Add to Wish List

Qty

6% off MSRP

$ 217.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD

Add to Wish List

The diverter valve is responsible for redirecting boost away from the intake when it's not needed. Other cars use a blow-off valve to vent the pressurized air into the atmosphere (the whoosh sound commonly heard on turbo engines) but BMW and other makers use a diverter valve to keep the air circulating through the intake for emissions purposes. A failing diverter valve will lead to a boost leak as turbocharged air leaks past the seals instead of going into the engine when you want it. This is a minor issue on stock engines but a bigger issue on tuned or heavily modded engines (those will use an aluminum diverter valve instead of the stock plastic). The factory diverter valve is plastic which is prone to cracking and electric which will fail without warning. This is a direct replacement diverter valve for cars with the N55 and S63 (X5M/X6M) engines.

N55 takes 1 diverter valve.
S63 takes 2 diverter valves (1 per turbo).

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5 X5,E71 X6,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36
S63 engine applies to X5M/X6M only. Fxx M5/M6 uses S63TU engine and does not use a diverter valve at all.

Show More Show Less

OEM Mahle Air Filter - Right - E70/71 F01/02 F07/10 N63 4.4L ...

T#:381264

Part#: 13717577458

Ships in 6 Business Days

$ 50.15 USD

Add to Wish List

Qty

$ 50.15 USD

Add to Wish List

Replacement air filter for the stock airbox, made by OEM supplier Mahle.

OEM Mahle Air Filter - Left - E70/71 F01/02 F07/10 N63 4.4L

T#:381263

Part#: 13717577457

Ships in 6 Business Days

$ 52.53 USD

Add to Wish List

Qty

$ 52.53 USD

Add to Wish List

Replacement air filter for the stock airbox, made by OEM supplier Mahle.

High Flow Water Methanol Check Valve (Nylon Line)

T#:21374130

Part#: SNO-8CV

Ships in 7 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Billet 100 Micron Water Methanol Filter

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Black High Temp Nylon Water Methanol Tubing - 20'

T#:20815165

Part#: SNO-80088

Special Order: No Guaranteed ETA

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Snow Performance 20' Bag High Temp Nylon Water Methanol Tubing 100% Methanol Resistant 800 PSI Burst Rating Black

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Back Ordered

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

OEM VDO Throttle Body - N63, S63

We Price Match - Give Us A Call or Chat!

T#:3136222

Part#: 13547555944

Special Order: No Guaranteed ETA

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Bremmen Parts Throttle Body - BMW N63 S63

T#:4455956

Part#: 13547555944

Special Order: No Guaranteed ETA

$ 165.99 USD

Add to Wish List

Qty

$ 165.99 USD

Add to Wish List

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body to restore proper engine operation. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

ECS Tuning Charge Pipe Pipe Kit - BMW E71 X6 F01/02 N54 3.0L ...

T#:6940389

Part#: 090767ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

OEM Elring Intake Manifold Gasket - BMW N55 S55 3.0L

T#:2691340

Part#: 11617588624

In Stock

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Leaking intake gaskets can cause power loss, rough running, and even trigger a check engine light. This gasket should be replaced each time the intake manifold is removed.

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Genuine BMW Rubber Buffer - 13717603399

T#:43409

Part#: 13717603399

In Stock

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Genuine BMW Rubber Buffer
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N57N,N63,N63N,S63,S63N

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Genuine BMW Turbo-Intercooler Clamp - 11657558922

T#:36977

Part#: 11657558922

In Stock

7% off MSRP $ 17.66

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.49 USD

Add to Wish List

Qty

7% off MSRP

$ 17.66

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.49 USD

Add to Wish List

T-Bolt clamp used for the intercooler piping. This ensure that there will be no leaks from the intake hoses or pipes, holding everything tightly together.

Genuine BMW Clamp
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N54,N54T,N63,N63N

Show More Show Less

Genuine BMW O-Ring - 13717568030 - E71,E82,E89,E90,E92,E93,F01 ...

T#:43252

Part#: 13717568030

In Stock

Sale - Save 25% $ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.28 USD

Add to Wish List

Qty

Sale - Save 25%

$ 14.99

This product was last offered at the strikethrough price on
05-02-2026

$ 11.28 USD

Add to Wish List

Genuine BMW O-Ring
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Genuine BMW Intake Manifold Gasket

T#:36571

Part#: 11617588624

In Stock

13% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Qty

13% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Don't let a leaking gasket rob your performance. Replace it with a Genuine BMW gasket and enjoy smooth reliable performance.

Genuine BMW Torx-countersunk Head Screw - 07129905261

T#:28871

Part#: 07129905261

In Stock

Sale - Save 26% $ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3.68 USD

Add to Wish List

Qty

Sale - Save 26%

$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 3.68 USD

Add to Wish List

Genuine BMW Torx-Countersunk Head Screw -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Show More Show Less

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Li...

T#:21308470

Part#: SNO-40012-BRD

In Stock at Vendor

7% off MSRP $ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Line Systems) is designed to relocate your standard 3QT Snow Performance Water-Methanol Tank or any custom tank to the trunk of your vehicle. This upgrade includes everything necessary to safely move and secure your water-methanol system.

Comprehensive Kit: Includes 15 feet of stainless steel braided line, a high-flow solenoid upgrade, and all required AN fittings.
Durable Construction: Features high-quality, stainless steel braided lines for superior strength and resistance to wear.
Enhanced Performance: Designed to ensure optimal performance and reliability of your water-methanol system when relocated.
Easy Installation: Provides all necessary components for a straightforward trunk mount installation.
Versatile Application: Suitable for moving standard and custom water-methanol tanks to the trunk of any vehicle.

Show More Show Less

Kayser O-Ring

T#:584199

Part#: 13717568031

In Stock

$ 7.50 USD

Add to Wish List

Qty

$ 7.50 USD

Add to Wish List

Charge pipe to throttle body O Ring

VRSF 2" N54 Turbo Outlet Charge Pipe O-Ring Pair - E9X E82/88 E60 N54...

We Price Match - Give Us A Call or Chat!

T#:4744843

Part#: 625018

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replacement o-rings for the VRSF turbo to turbo outlet connections for your N54 BMW. Fits the following VRSF part numbers (as well as most other brand charge pipes): 10901030 & 10901045.

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 7 Series F01 (2009+)

Sub-Categories

Enhance Engine Performance with Silicone Vacuum Line

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results