New to our line of exceptional performance upgrades for your BMW, the Turner Motorsport E9X M3 (S65) Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is quite unassuming. When you open up the valves, using the supplied valve controller, this exhaust transforms your car, giving your car a menacing growl!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone, even California!

This exhaust sports Mandrel bent dual 2.5” 304SS pipes with a brushed finish, with exhaust gases flowing through efficient piping to High flow, valved, stainless steel mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved, stainless-steel muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies both your neighbors and your need for sound with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Turner Engraved Exhaust Tips
Features:

Mandrel bent dual 2.5” 304SS pipe with brushed finish
Turner Engraved Brushed exhaust tips
High flow, valved, stainless steel mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Set of 2 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Enhance Your BMW with the Magnaflow Universal Muffler

Looking for an affordable way to replace your BMW's muffler and transform its exhaust note? Your search ends here! The brand-new Magnaflow Universal Muffler is your budget-friendly solution, designed to elevate your BMW's sound and style.

Key Features:

• Budget-Friendly: The Magnaflow Universal Muffler is the go-to choice for budget-conscious BMW owners seeking an economical way to enhance their vehicle's sound.
• Enhanced Sound: This muffler delivers an improved exhaust note, creating a deeper, more attractive tone that will make your BMW stand out from the crowd.
• Universal Fit: With its universal fit, it is compatible with a range of BMW models, ensuring a seamless installation process.
• Quality Construction: Crafted from durable materials, this muffler is built to last, providing long-term performance and value.
• Turner Motorsport Approved: Endorsed by Turner Motorsport, a renowned name in the BMW community, you can trust this muffler to meet your expectations for quality and performance.

Say goodbye to that noisy ride and give your BMW the sound it deserves with the Magnaflow Universal Muffler. Upgrade today!

Upgrade your BMW with the Turner Motorsport E9X M3 (S65) Valved Axle-back Exhaust, offering a blend of robust exhaust notes and enhanced performance. This system delivers a menacing growl when the valves are open, providing an aggressive driving experience. Plus, it's emissions legal, retaining all four factory cats, making it ideal for various preferences and regulations.

The exhaust features Mandrel bent dual 2.5” 304SS pipes with a brushed finish, high-flow valved stainless steel mufflers, and easy-fit Accuseal slip-fit joints. The kit includes an axle-back exhaust with X pipe, adapter pipes for factory mid pipes, muffler valve controller kit, and engraved exhaust tips. Enjoy the Turner Motorsport E9X M3 full exhaust system, balancing volume for both your neighbors and your desire for an impactful exhaust.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• High-flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Retains factory emissions
• Kit includes axle-back exhaust, adapter pipes, muffler valve controller kit, and engraved exhaust tips

Carbon Fiber S65 Intake:

Elevate your S65 engine with the Carbon Fiber S65 Intake from Turner. This gloss carbon fiber intake not only adds a roaring induction noise but also outperforms the factory intake by over 35%. Revel in the improved audible experience, the beauty of carbon fiber in your engine bay, and enhanced engine performance.

The Turner S65 Carbon Intake is designed with a larger cross-sectional area, ensuring more airflow to the engine in high-demand scenarios. The full carbon intake tube connects to a carbon heat shield housing a large cone filter. Tested to outperform the factory intake with over 750CFM, this intake offers benefits like increased throttle response and a unique, stand-out design.

Benefits:

• Unique design for a standout appearance
• Full carbon fiber heat shield
• Improved airflow and engine breathing
• Increased throttle response
• Added induction noise for an exhilarating driving experience

Part Design:

• Designed and engineered in-house using 3D laser scanning and CAD technology
• Hood Inlet Scoop for directing cool air
• Full Carbon Fiber Heat Shield Assembly
• Monstrous 9" cone air filter
• 7"x5" Carbon Fiber Inlet Tube
• Fully compatible with OEM Secondary Air Injection emissions system

Kit Contents:

• Carbon Fiber Heat Shield
• Carbon Fiber Intake Tube
• Plenum Silicone Coupler
• 9" Cone Air Filter
• Installation Hardware

Product Development:

The Turner S65 Intake System undergoes rigorous development, including FARO laser scanning, 3D CAD modeling, in-house prototyping, and extensive testing on a Mustang AWD 500 SE dyno and Superflow SF-750 Flowbench.

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a stunning matte titanium finish and a slant-cut, single-wall outlet for a sleek appearance. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Elegant matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a refined look
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

A true dual exhaust featuring twin oversized 2.5" exhaust sections, lightweight mufflers, and a rowdy exhaust note.

Prepare to give your 335 the boost it deserves. Our cat-back exhaust was made to redefine the driving experience of your E9x. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust flow and tuned exhaust note, we are very excited to get these exhausts on 335's everywhere, don't wait!

In crafting the 335 exhaust systems, the primary focus is achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. ECS's cat-back exhaust for your 335 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N54 and N55 E chassis, ECS engineered an exhaust packed with innovative features, compatible with factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. The ECS exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket downpipes. The dual 2.5" mid-pipes make their way toward the rear axle with smooth transitions for effortless exhaust flow. Replacing the large suitcase muffler is a pair of 2.5" turbo-style mufflers that shed weight and give a signature sound. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and frequency. Paired with the 2.5" mufflers is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
37% lighter than stock!
Stock cat-back: 78lbs
ECS cat-back: 49lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

Dual 2.5" mid-pipes and rear section
2.5" free-flowing mufflers for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips

Elevate your BMW experience with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust. This cutting-edge system offers exotic exhaust notes, weight reduction, and a noticeable performance boost. The muffler valves provide a tame, factory-like sound with a hint of exotic character when closed, and transform your car into an exotic beast when opened, thanks to the supplied valve controller.

For those who prefer to keep their factory cats, this exhaust setup is the ideal choice. It leaves all 4 factory cats in place, ensuring 100% emissions legality. The Mandrel bent dual 2.5” Ti22 pipes and high-flow, valved Titanium mufflers provide efficient gas flow and a dual-purpose exhaust system that satisfies both neighbors and performance enthusiasts.

Kit Includes:

• Turner Axle back Exhaust with X pipe
• Turner Adapter pipes for Factory Mid Pipes
• Turner Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips

Features:

• Mandrel bent dual 2.5” Ti22 pipe
• Turner Engraved Brushed exhaust tips
• High flow, valved, Titanium mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

Upgrade your M3 with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust for a perfect blend of style and performance.

• Stainless steel construction
• Multi-chamber design for increased performance
• Chambered muffler performance sound

Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.

Key Benefits:

• 100% stainless steel construction for robustness
• Lap-joint welding ensures solid build quality
• Free-flowing, straight-through design for enhanced performance
• Stainless mesh wrap and acoustical fiber fill deliver a smooth, deep tone
• Packed tightly for long-lasting performance without sound degradation

Features:

• 2.5'' Inlet and Outlet
• 14'' body length
• 20'' overall length
• May require welding/fabricating for fitting; not a direct fit for any specific car model