Performance Clutch Kits for BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.
Sort By:

Dodson Motorsport - Corporate Logo
T#:52305477
Part#: DMS-8567
Special Order: No Guaranteed ETA
New Item
$ 2,474.99 USD
$ 2,474.99 USD
Equip your BMW with the world’s strongest dual-clutch technology from Dodson Motorsport, the record-breaking choice for drivers who demand unrivaled strength and performance
Dodson Motorsport - Corporate Logo
T#:52305474
Part#: DMS-8561
Special Order: No Guaranteed ETA
New Item
$ 5,483.99 USD
$ 5,483.99 USD
Equip your BMW with the world’s strongest dual-clutch technology from Dodson Motorsport, the record-breaking choice for drivers who demand unrivaled strength and performance
Dodson Motorsport - Corporate Logo
T#:52305476
Part#: DMS-8564
Special Order: No Guaranteed ETA
New Item
$ 2,853.99 USD
$ 2,853.99 USD
Equip your BMW with the world’s strongest dual-clutch technology from Dodson Motorsport, the record-breaking choice for drivers who demand unrivaled strength and performance

Dodson Motorsport - Corporate Logo
T#:52305475
Part#: DMS-8592
Special Order: No Guaranteed ETA
New Item
$ 5,133.99 USD
$ 5,133.99 USD
Equip your BMW with the world’s strongest dual-clutch technology from Dodson Motorsport, the record-breaking choice for drivers who demand unrivaled strength and performance

Packaged by Turner - Corporate Logo
T#:37655994
Part#: N55PCTKT
Ships on Sep 21, 2026
Sale - Save 8% $ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD
Sale - Save 8%
$ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD

Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Show More Show Less
DKM - Corporate Logo
T#:640069
Part#: MS-006-076
Ships on Jan 25, 2027
$ 1,299.99 USD
Free Shipping
$ 1,299.99 USD
Free Shipping
Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less

Spec Clutches - Corporate Logo
T#:209171
Part#: SB533F-2
In Stock
$ 979.00 USD
Free Shipping
$ 979.00 USD
Free Shipping
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+ ...
For Vehicles with Production Date from 02/09 with 6 Bolt Crank
Packaged by Turner - Corporate Logo
T#:41931281
Part#: SB53A3STG3PKT
Back Ordered
$ 1,735.99 USD
Free Shipping on orders $49 and up
$ 1,735.99 USD
Free Shipping on orders $49 and up
For BMW owners demanding consistent performance, faster throttle response, and long-lasting clutch life, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 3+ delivers unmatched value and performance.
Show More Show Less

BMW N54 Stage 1 Clutch Kit With Flywheel Single Sprung Organic - 6 Bo...
For Vehicles with Production Date from 02/09 with 6 Bolt Crank
XClutch - Corporate Logo
T#:26738370
Part#: XKBM24564-1A
Back Ordered
$ 1,387.99 USD
Free Shipping
$ 1,387.99 USD
Free Shipping

BMW N54 Stage 1 Clutch Kit With Flywheel Single Sprung Organic - 6 Bolt provides a high-performance solution for enthusiasts seeking enhanced throttle response and high torque capacity. Ideal for racing applications, this kit is engineered to deliver exceptional performance with a lightweight design.

  • Lightweight Design: Improves throttle response, making it perfect for high-performance racing.
  • High Torque Capacity: Capable of handling up to 440 ft/lbs of torque, suitable for high power applications.
  • Optimized Clutch Performance: Features the latest pressure plate design and organic friction material for balanced drivability and performance.
  • Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.
  • Comprehensive Kit: Includes a single mass flywheel, sprung organic clutch disc, pressure plate, flywheel bolts, pressure plate bolts, release bearing, alignment tool, and clutch spline grease.

Turner Motorsport's BMW N54 Stage 1 Clutch Kit offers advanced engineering and high-quality components to elevate your driving experience.

Show More Show Less

XClutch - Corporate Logo
T#:17804824
Part#: XKBM18531-2E
Back Ordered
$ 1,599.99 USD
Free Shipping
$ 1,599.99 USD
Free Shipping
The XClutch twin solid disc 7 1/4" offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 1/4" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.098 Assembly Weight Maximum Torque Capacity - 900 Recommended Use - Track Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
9" Performance Clutch Kit - Single Sprung Organic Disc
For Vehicles With 6 Bolt Crankshaft (Production Date From 02/09)
XClutch - Corporate Logo
T#:17804815
Part#: XKBM24566-1A
Back Ordered
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping
The XClutch 10 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. XClutch sprung organic kits offer excellent dampening and the highest levels of driveability in the range. They are ideal for performance street use. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 7/16" Clutch Disc Spline - 26 Disc Material - Organic Disc Type - Sprung Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Recessed Flywheel Step - -0.375 Assembly Weight Maximum Torque Capacity - 440 Recommended Use - Street Use Includes Single Mass Flywheel 1 Sprung Organic Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+
For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank
Packaged by Turner - Corporate Logo
T#:41931266
Part#: SB53A2STG3PKT
In Stock
$ 1,735.99 USD
Free Shipping on orders $49 and up
$ 1,735.99 USD
Free Shipping on orders $49 and up
The SPEC Stage 3+ With Billet Single Mass Flywheel is the ideal solution for BMW enthusiasts who need race-capable performance without sacrificing street comfort—perfect for the ultimate dual-purpose build.
Show More Show Less