BMW Internal Engine Parts for BMW 3 Series E92 (2007-2013)

Inline 6 RACE Series Bearing Shells - Set

T#:637190

Part#: 6B1584H-.025

Special Order: No Guaranteed ETA

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

Upgraded Bearing Shells for you N55/N54/S55B30!

Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine

T#:42571264

Part#: P102061410.BR

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Ensure your BMW N55 engine stays sealed and performs at its peak with the Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine—your essential upgrade for power and reliability.

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

T#:2500

Part#: TMS2500

Ships on Dec 22, 2026

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

T#:2474

Part#: TMS2474

Ships on Dec 22, 2026

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Crankshaft

T#:38924612

Part#: 11217580483

Special Order: No Guaranteed ETA

Sale - Save 3% $ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Direct replacement N55 crankshaft for a fraction of the cost of Genuine

OEM Kolbenschmidt Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S5...

T#:31092510

Part#: 11367583208

Special Order: No Guaranteed ETA

$ 103.99

This product was last offered at the strikethrough price on
03-31-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the exhaust camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

N54B30 32cc Platinum Series Dish Extreme Duty Piston Set

T#:17073600

Part#: 646000CE-6

Back Ordered

8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84mm

T#:2928968

Part#: 197841309

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84mm delivers superior performance and reliability for your BMW engine build. This high-quality piston kit replaces the factory cast aluminum pistons with robust forged pistons, offering enhanced durability and heat resistance. Designed to withstand the stresses of extreme temperatures, detonation, and high pressure, these pistons are ideal for high-performance applications. MAHLE Motorsport’s PowerPak Piston Kit ensures a significant upgrade in strength and reliability, making it perfect for both motorsport enthusiasts and those seeking to enhance their daily driving experience.

Enhanced Durability: Forged pistons provide superior strength and are more resistant to extreme heat, detonation, and high pressure compared to cast aluminum.
Precision Engineering: Made from high-quality 2618 alloy, ensuring reliability under demanding conditions.
Complete Kit: Includes pistons, pins, clips, and rings for a comprehensive upgrade.
Optimized Performance: Designed for high-performance applications, improving engine efficiency and power output.
Advanced Coatings: Features phosphate, Grafal, and hard anodized top ring groove coatings for extended longevity and performance.

Specifications:

Compression Ratio: 9.5:1
Bore: 84.00mm
Stroke: 89.6mm
Rod: 145.05mm
CH: 31.7mm
Piston Style: Dish, with 4 valve reliefs
Crown Volume: 17.2cc
Piston Mass: 314g
Piston Material: Forged, 2618
Pin Diameter: 22mm
Pin Style: Floating
Pins Included: Yes
Clip Style: Round Wire
Clips Included: Yes
Piston Ring Thickness: 1.0mm, 1.2mm, 2.8mm
Rings Included: Yes
Sold As: Set of 6
Coatings: Phosphate, Grafal, Hard Anodized top ring groove

Show More Show Less

Genuine BMW Collar Screw - 11367524954

T#:34635

Part#: 11367524954

In Stock

10% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.48 USD

Add to Wish List

Qty

10% off MSRP

$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.48 USD

Add to Wish List

Genuine BMW Collar Screw - M10X1X94
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55

We Price Match - Give Us A Call or Chat!

T#:591661

Part#: 11337548690

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Hydraulic valve lifter

Genuine BMW Engine Connecting Rod Bolt - BMW

T#:12938

Part#: 11247589671

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

This bolt is located in the connecting rod. Two required per rod. Measurements: M9x47mm

Genuine BMW Connecting Rod Bolt - E9X M3, E6X M5 M6

T#:33077

Part#: 11247834522

In Stock

9% off MSRP $ 19.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.68 USD

Add to Wish List

Qty

9% off MSRP

$ 19.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.68 USD

Add to Wish List

Connects the lower half of the connecting rod to the top half. 2 needed per connecting rod.

Genuine BMW Sleeve - N52 N54 3.0L - 11127575422

T#:31485

Part#: 11127575422

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Genuine BMW Sleeve
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less

Exhaust Valve - Sodium Filled - Oversize

T#:21505757

Part#: BMEVI-1054S-HS-1

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Plastigage Set

T#:640925

Part#: CTA2450

In Stock

$ 9.27 USD

Add to Wish List

Qty

$ 9.27 USD

Add to Wish List

Plastigage Set is an essential tool for accurately measuring the clearances of engine rod and main bearings without the need for expensive micrometers. This set is ideal for ensuring proper engine assembly by helping you choose the correct size replacement bearing inserts. Designed to cover all automotive engines, the Plastigage Set provides precise measurements to maintain optimal engine performance.

Accurate Measurements: Measures clearances of engine rod and main bearings, ensuring proper fitment.
Cost-Effective: Eliminates the need for expensive micrometers, offering a budget-friendly solution.
Universal Application: Suitable for all automotive engines, making it versatile for various applications.
Complete Set: Includes sizes .001" - .003" (green) and .002" - .006" (red) to cover a wide range of measurements.

Show More Show Less

Ina Hydraulic Valve Lifter - E60 E61 E82 E88 E90 E91 E92 E93 F10 Z4 E...

We Price Match - Give Us A Call or Chat!

T#:596290

Part#: 11337605330

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

If your BMW has noisy or stuck lifters, replace them to improve performance and stop the annoying chatter

Genuine BMW Dowel - 11121726241

T#:31215

Part#: 11121726241

In Stock

13% off MSRP $ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD

Add to Wish List

Qty

13% off MSRP

$ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD

Add to Wish List

Genuine BMW Dowel - D=12,5Mm
This item fits the following BMW Chassis:
E39 M5,E60 M5,E63 M6,E82 1M Coupe,E53 48IS,E30,E34,E36,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Valve Keeper - M50, M52, S50US, S52, M52TU, M54, N52, N54, N62, S54, ...

T#:14519

Part#: 11341461405

In Stock

$ 3.97 USD

Add to Wish List

Qty

$ 3.97 USD

Add to Wish List

This is the OE BMW valve keeper (collet) used to hold the valve spring and seats in place on the valve stem. If you're doing any valve work on the engine these are an absolute must!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Price is per keeper and each valve requires two.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2001-2002 E46 BMW M3
2006-2010 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2010 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2010 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 328i 335i - Convertible
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive35i X5 xDrive48i
2009+ E70 BMW X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i
2009+ E71 BMW X6M
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Bremmen Parts Cylinder sleeve - E60, E61, E70, E71, E82, E83, E88, E9...

T#:1195922

Part#: 11127575422

In Stock

Sale - Save 3% $ 6.59

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 6.59

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

The sleeves that go in each cylinder of the cylinder cover

Exhaust Valve Set - Sodium Filled - Oversize

T#:21505765

Part#: BMEVI1054SHS-1KT

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Genuine BMW Hex Bolt - Engine Crankshaft Main Bearing Cap Bolt ...

T#:19658

Part#: 11117589711

In Stock

14% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.11 USD

Add to Wish List

Qty

14% off MSRP

$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.11 USD

Add to Wish List

Genuine BMW Hex Bolt - M10X100
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Torx Bolt - 11127535024

T#:31391

Part#: 11127535024

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Genuine BMW Torx Bolt - M7X70
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Intake Valve - Black Nitride - Oversize

T#:21505753

Part#: BMIVN-1054S-1

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Cat Cams N54 Sport Camshaft Set

T#:25805744

Part#: 1305001

Special Order: No Guaranteed ETA

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Street cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT).

Show More Show Less

Genuine BMW Rectangring - 11317587757

T#:34078

Part#: 11317587757

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Genuine BMW Rectangring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Rod Bearing Replacement Kit

T#:41695012

Part#: 6B1584H-STDLMTKT

In Stock

$ 465.93 USD

Add to Wish List

Qty

$ 465.93 USD

Add to Wish List

Rod bearings are a known issue for your N54, replace them to prolong life of your Engine!

Performance Conical Valve Spring - Sold Each

T#:21472894

Part#: SPR-FE20BE

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Genuine BMW Washer - 11127550856

T#:31410

Part#: 11127550856

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Washer
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5 X5,E83 X3,E85 Z4,E90,E92,E93

Show More Show Less

Exhaust Valve - Sodium Filled - Std Size

T#:21505756

Part#: BMEVI-1054S-HS

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Genuine BMW Screw - 11127593207

T#:31528

Part#: 11127593207

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Genuine BMW Ball Pin -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Intake Valve - Black Nitride

T#:21505752

Part#: BMIVN-1054S

In Stock

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Supertech Forged Pistons - Set Of 6

T#:21604329

Part#: P6-BMN55-84-T-6

In Stock

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged pistons are a great choice for performance engine builds! Bore: 84.00mm Over Size: STD Comp Ratio: 10.2:1 Dome dish: -10.4 Head CCs: 37cc Comp Height: 32.40mm Stroke: 89.60mm Skirt style: Slipper Design Rod Length: 141.35mm Pin Diam: 22mm Material: 4032 Application: All Motor / Turbo Ring part number: R84-GNH8400 (MUST BE PURCHASED SEPARATELY)

Show More Show Less

Aluminum Cylinder Head Bolt Set

T#:594302

Part#: 11120392547

Ships in 1 Business Day

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

Performance Rod Bearing Replacement Kit - N54 3.0L

T#:36032371

Part#: N54-WPC-RBKT2

In Stock

Sale - Save 6% $ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 759.90 USD

Add to Wish List

Qty

Sale - Save 6%

$ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 759.90 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated connecting rod bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube

Show More Show Less

Forged Connecting Rods - Sold Each

T#:21604327

Part#: CR-BMN55-H144.35

In Stock

$ 198.99

This product was last offered at the strikethrough price on
05-03-2026

$ 184.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 198.99

This product was last offered at the strikethrough price on
05-03-2026

$ 184.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged rods are a great choice for performance engine builds! These rods come with ARP 2000 hardware and are designed for high powered N55/S55 applications. H-Beam design Forged 4340 alloy Center to center: 144.35mm Be bore: 53.6mm Be width: 20.88 Pe bore: 22mm full float Pe width: 20.88mm tapered ARP 2000 - 3/8" x 1.600" bolts

Show More Show Less

Genuine BMW Needle Bearing - 11377615379 - N55 3.0L

T#:34791

Part#: 11377615379

In Stock

5% off MSRP $ 19.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 18.99 USD

Add to Wish List

Qty

5% off MSRP

$ 19.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 18.99 USD

Add to Wish List

Genuine BMW Needle Bearing
This item fits the following BMW Chassis:
E53 48IS,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Cylinder Head Bolt Washer

T#:26538363

Part#: 11127550856

In Stock

$ 2.50 USD

Add to Wish List

Qty

$ 2.50 USD

Add to Wish List

Genuine BMW Camshaft Exhaust Zyl.1-4 - 11317841166 - E90,E92,E93 ...

T#:34137

Part#: 11317841166

Ships in 1 day

2% off MSRP $ 1,451.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,415.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,451.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,415.99 USD

Add to Wish List

The BMW S65 replacement camshaft is a premium OEM-spec component designed to restore or enhance engine performance. Crafted for precise timing and durability, it optimizes valve operation for improved power delivery and efficiency. Perfect for BMW M3 E90, E92, and E93 models, this camshaft ensures factory reliability while supporting high-revving performance. Genuine BMW Camshaft Exhaust - Zyl.1-4 This item fits the following BMW Chassis: E90,E92,E93 Fits BMW Engines including: S65

Show More Show Less

King Racing - BMW S65 GPC Coated Rod Bearings (STD) - E9X M3 ...

T#:51110167

Part#: CR8066GPC

In Stock

13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

King Racing - BMW S65 GPC Coated Rod Bearings (STDX) - E9X M3 ...

T#:51110168

Part#: CR8066GPC-STDX

In Stock

13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

ARP Ultra-Torque Fastener Assembly Lubricant (Select Your Size) ...

T#:338571

Part#: TMS1733

In Stock

Starting at $ 1.99 USD

Add to Wish List

Starting at $ 1.99 USD

Add to Wish List

If you are using a premium fastener, such as the ARP brand rod bolts, head bolts, or main bolts, then you will want this assembly lube. Made to be used to precisely duplicate all ARP fastener preload specifications.

Show More Show Less

N54 Crank Hub Service Kit - From 02/2011

For vehicles with production date from 02/2011

T#:2227020

Part#: N54POCRANKT

In Stock

Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Performance Rod Bearing Set - N55

T#:26238416

Part#: 5150-HPRBS-N55

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

5150 High Performance Coated Rod Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

Febi Intake Hydraulic Tappet

We Price Match - Give Us A Call or Chat!

T#:381750

Part#: 11337548690

In Stock at Vendor

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Hydraulic valve lifter

URO Cam Gear - Exhaust - E60 E9X Z4 N54 3.0L

T#:53079364

Part#: 11367540348

Ships in 1 Business Day

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

A common source of exhaust-related codes, VANOS, and boost-related issues can often be traced back to this cam gear. If yours is worn and failed, replace it with this quality replacement part from URO.

Show More Show Less

BMW N54 JE Pistons

T#:33612920

Part#: 338095

Back Ordered

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

The JE Pistons kit for the BMW N54 engine is built for serious performance and reliability. These forged aluminum pistons are engineered to handle the high boost demands of the 3.0L twin-turbo inline-six. Lightweight for improved throttle response, they feature optimized designs for better combustion efficiency. With options for custom compression ratios and coatings, this kit is perfect for high-horsepower builds, ensuring durability whether on the street or the track.

Show More Show Less

BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins

T#:25473980

Part#: CP-PP-HD-N54-6KT

Ships in 3 Business Days

$ 233.99

This product was last offered at the strikethrough price on
08-12-2026

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

BMW N54 3.0L CP-Carrillo Heavy Duty Wrist Pins are engineered to enhance the performance and reliability of your BMW's engine. Designed specifically for the N54 3.0L engine, these heavy-duty wrist pins provide superior strength and durability under high-stress conditions. With CP-Carrillo's reputation for high-quality performance parts, these wrist pins ensure your engine operates at its best, delivering exceptional power and longevity.

Superior strength for high-stress conditions
Enhanced engine performance and reliability
Designed specifically for BMW N54 3.0L engines
High-quality construction by CP-Carrillo
Improves engine longevity and durability

Show More Show Less

Febi-Bilstein Spark Plug Recess Ignition Coil Guide - 11127565869 ...

We Price Match - Give Us A Call or Chat!

T#:16873849

Part#: 11127565869

In Stock

$ 7.99

This product was last offered at the strikethrough price on
07-10-2026

$ 7.13 USD

Add to Wish List

Qty

$ 7.13 USD

Add to Wish List

Insulation sleeve for the spark plug insert on then valve cover.

MAHLE Forged Piston Kit 92.50mm - S65 - 4.0L

T#:2928986

Part#: 197843342

In Stock at Vendor

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

T#:19891361

Part#: MMR20-1004

In Stock

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E92 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results