BMW Internal Engine Parts for BMW 3 Series E92 (2007-2013)

N54 Manley Performance TurboTuff Connecting Rods

T#:26271778

Part#: 14448-6

In Stock at Vendor

$ 1,641.99 USD

Add to Wish List

Qty

$ 1,641.99 USD

Add to Wish List

Unlock the full potential of your BMW N54 engine with the Forged TurboTuff Connecting Rod Set from Manley Performance. Crafted with precision and expertise, these connecting rods are designed to deliver unparalleled performance and durability. Renowned for their lightweight yet robust construction, they undergo rigorous manufacturing processes to ensure exceptional quality. Each set is meticulously weight-matched for optimal balance, providing enhanced engine efficiency and reliability. Elevate your BMW N54 engine to new heights with the Manley Performance TurboTuff Connecting Rod Set.

Show More Show Less

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 2 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

Ferrea High Performance Valve Spring Kit for BMW N55/S55

T#:23416526

Part#: FER-HPVSK-N55

Ships in 4 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Adjustment Unit - outlet Camshaft

T#:34660

Part#: 11367583208

Ships in 1-2 days

3% off MSRP $ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Qty

3% off MSRP

$ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Genuine BMW Adjustment Unit, Outlet Camshaft -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N55,S55

Show More Show Less

Genuine BMW Bearing Shell - N52 3.0L, N54 3.0L, N55 3.0L

T#:32670

Part#: 11217627037

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Non Return Valve - E90 E92 E93 M3

T#:34642

Part#: 11367537692

Ships in 1-2 days

7% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Qty

7% off MSRP

$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Genuine BMW Non-Return Valve -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N12,N14,N16,N18,S65

Genuine BMW Cam Bearing Ledge - Exhaust - N52 N54 N55 3.0L

T#:31384

Part#: 11127531224

Ships in 1-2 days

17% off MSRP $ 706.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 586.49 USD

Add to Wish List

Qty

17% off MSRP

$ 706.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 586.49 USD

Add to Wish List

Genuine BMW Bearing Ledge Exhaust

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Camshaft Exhaust Timing Gear - E9X M3 S65

T#:34720

Part#: 11367841117

Ships in 1-2 days

2% off MSRP $ 1,365.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,337.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,365.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,337.99 USD

Add to Wish List

This timing gear is located on the end of the camshaft, and is sometimes replaced during timing services.

Genuine BMW Camshaft - Intake - E60 E61 E82 E88 E90 E91 E92 E93 F10 Z...

T#:34049

Part#: 11317563663

Ships in 1-2 days

3% off MSRP $ 1,116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,088.99 USD

Add to Wish List

Qty

3% off MSRP

$ 1,116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,088.99 USD

Add to Wish List

Genuine BMW Inlet Camshaft -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Supertech Single Groove Intake Valve - Set Of 12

T#:14783498

Part#: BMIVN-1055S-12

Ships in 8 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

OEM VDO Crankshaft & Transmission Position Sensor - Multiple BMWs ...

We Price Match - Give Us A Call or Chat!

T#:14949

Part#: 13627525015

Ships on Jan 28, 2027

$ 89.63 USD

Add to Wish List

Qty

$ 89.63 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars.

BMW S65 4.0L MAHLE Forged Piston Kit 92mm

T#:2928987

Part#: 197843622

In Stock

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

N55/S55 37cc Platinum Series Dish Extreme Duty Piston Set - 84.5mm Bo...

T#:17073606

Part#: 647005CE-6

In Stock

7% off MSRP $ 1,309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,222.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 1,309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,222.99 USD

Limited Qty Sale

Add to Wish List

Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L

T#:24145934

Part#: E9XN54RBRKT

In Stock

$ 521.23 USD

Add to Wish List

Qty

$ 521.23 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

E9X S65 WPC Performance Rod Bearing Replacement Kit

T#:7260312

Part#: S65WPCDKT

In Stock

Sale - Save 2% $ 1,394.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,370.29 USD

Add to Wish List

Qty

Sale - Save 2%

$ 1,394.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,370.29 USD

Add to Wish List

N55 Turbo Install Kit

T#:401612

Part#: 18407502196KT2

In Stock

$ 290.99 USD

Add to Wish List

Qty

$ 290.99 USD

Add to Wish List

Engine Main Bearing Kit - Size 0.50 Oversized

+0.50mm

T#:25706104

Part#: MB7776SI0.5

In Stock

$ 118.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 118.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.99 USD

Limited Qty Sale

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Genuine BMW Intake Valve - N54 3.0L

T#:34510

Part#: 11347553775

In Stock

1% off MSRP $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

Qty

1% off MSRP

$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

Genuine BMW Intake Valve - 31,4/4,968Mm
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

URO VVT Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S55 3.0L ...

T#:7530051

Part#: 11367583208

In Stock

$ 201.99 USD

Add to Wish List

Qty

$ 201.99 USD

Add to Wish List

This timing chain camshaft gear controls the camshaft position and timing and is located toward the front of the engine. Located on the exhaust side of the engine at the front end of the exhaust camshaft. Sometimes changed when replacing the timing chain. T#34658 may also be required when servicing this part.

Show More Show Less

E90/E92 M3 WPC Treated S65 Rod Bearings (Set)

T#:388756

Part#: 11247841703WPCKT

In Stock

Sale - Save 3% $ 835.99

This product was last offered at the strikethrough price on
07-12-2026

$ 815.00 USD

Add to Wish List

Qty

Sale - Save 3%

$ 835.99

This product was last offered at the strikethrough price on
07-12-2026

$ 815.00 USD

Add to Wish List

Enhance Your BMW Engine with WPC-Treated OEM Connecting Rod Bearings

Upgrade your BMW engine performance by choosing WPC-treated OEM connecting rod bearings, surpassing the advantages of Original BMW bearings. WPC surface treatment is renowned for its ability to reduce friction and enhance component strength. Through ultra-fine particle blasting at high speeds, this treatment ensures smoother and stronger surfaces by utilizing thermal discharge. Combatting the critical enemies of heat and friction, WPC-treated bearings offer superior performance for your engine build or rod bearing service.

Key Benefits:

WPC-treated OEM connecting rod bearings for enhanced engine performance
Reduction in friction and addition of strength through surface treatment
Ultra-fine particle blasting results in smoother and stronger surfaces
Mitigates heat and friction, critical for high-performance engines

Show More Show Less

Crankshaft Thrust Bearing - Yellow - E60, E63, E64, E90, E92, E93 ...

T#:32721

Part#: 11217841613

Ships in 1-2 days

6% off MSRP $ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

6% off MSRP

$ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Yellow - 70,00Mm(0)
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E90,E92,E93

Fits BMW Engines including:
S65,S85

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

BE Bearings Performance Rod Bearing Replacement "Dry" Kit - E9x M3 W/...

T#:9868817

Part#: 11247838088DR2KT

In Stock

$ 974.33

This product was last offered at the strikethrough price on
07-23-2026

$ 973.82 USD

Add to Wish List

Qty

$ 973.82 USD

Add to Wish List

NOTE: This is a Dry kit and does not include engine oil. See our catalog for all engine oil options! Includes everything needed for a rod bearing service, featuring BE Bearings upgraded rod bearings. The S65 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings Hardware Oil filter Oil pan gasket RedLine assembly lube

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 10 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Crankshaft Thrust Bearing - Yellow - E60, E63, E64, E90, E92, E93 ...

T#:32724

Part#: 11217841617

Ships in 1-2 days

6% off MSRP $ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

6% off MSRP

$ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Yellow - 70,00Mm(0)
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E90,E92,E93

Fits BMW Engines including:
S65,S85

Show More Show Less

Rod Bearing Replacement Kit - E9x, E82, E88

T#:42133543

Part#: 11247589671TKT

Back Ordered

Sale - Save 1% $ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 560.25 USD

Add to Wish List

Qty

Sale - Save 1%

$ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 560.25 USD

Add to Wish List

Whether addressing rod bearing noise or performing preventative maintenance, this kit ensures optimal engine health, reducing the risk of costly repairs.

N54 Crank Hub Service Kit - Up To 02/2011

For vehicles with production date up to 02/2011

T#:2227021

Part#: N54PRCRANKT

In Stock

Sale - Save 3% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

Qty

Sale - Save 3%

$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

ARP ARP2000 Head Stud Kit - N55

T#:42335661

Part#: ARP-HSK-N55-S

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

Vargas "Spline Lock" Crank Hub Solution - N54

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Performance N55 Main Bearing Set

T#:26238415

Part#: 5150-HPMBS-N55

Ships in 4 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

Victor Reinz Cylinder Head Bolts - N54

T#:373825

Part#: 11127574303

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Head Bolt set for the N54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Show More Show Less

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm

T#:2928972

Part#: 197832225

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
Precision Specifications:
- Bore: 84.50mm
- Stroke: 89.6mm
- Rod: 145.05mm
- CH: 31.7mm
- Piston Style: Dish with 4 valve reliefs
- Crown Volume: 17.2cc
- Piston Mass: 314g
- Pin Diameter: 22mm
- Pin Style: Floating
Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW N55 S55 Ferrea High Performance Valve Kit

T#:23416508

Part#: FER-HPVK-S55-T-3

Ships in 4 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

JE BMW Pistons for N54+.5 Engine

T#:25938628

Part#: JE338095

Back Ordered

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

Upgrade your BMW's engine with JE Pistons designed for extreme applications, including professional competition, from Turner Motorsport. The N54B30 84.5mm Bore 9.5:1 Kit features high-tensile forged aluminum construction using 2618 T6 alloy for superior strength. Smooth flowing radii on domes and dishes ensure excellent flame travel, while included rings provide added convenience.

Engineered for extreme applications, including professional competition
High-tensile forged aluminum construction for superior strength
Smooth flowing radii on domes and dishes enhance flame travel
Includes rings for added convenience

Show More Show Less

Engine Main Bearing Kit - Std. Size

T#:26504952

Part#: MB5803CA

In Stock at Vendor

$ 312.99

This product was last offered at the strikethrough price on
07-23-2026

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silver Bi-Metal Construction: Crafted from King's premium silver bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L

T#:2928976

Part#: 197841325

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 84mm - N54 - 3.0L

T#:2928970

Part#: 197832209

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC

ARP Head Stud Kit - BMW N55/S55

T#:23416542

Part#: ARP-HSK-S56-CA

Ships in 1 Business Day

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit 92.50mm - S65 - 4.0L

T#:2928989

Part#: 197843642

In Stock at Vendor

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

S65 WPC Performance Rod Bearing Replacement Kit

Stronger & smoother, with less friction!

T#:5498491

Part#: S65WPCKT

In Stock at Vendor

Sale - Save 2% $ 1,583.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,558.85 USD

Add to Wish List

Qty

Sale - Save 2%

$ 1,583.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,558.85 USD

Add to Wish List

The S65 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service! Kit includes Upper and lower WPC Treated Genuine BMW Rod Bearings Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket RedLine assembly lube

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Manley Piston Ring, RING-84mm 1.0mm,1.2mm,2.8mm - Pack of 4

T#:26438209

Part#: 46840-4

In Stock at Vendor

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Genuine BMW Yellow Main Bearing - N54 3.0L N52 3.0L

T#:183149

Part#: 11217627029

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 65,00Mm(0)
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Crank shaft main Bearing - lower - N54 3.0L N52 3.0L N55 ...

T#:32664

Part#: 11217627025

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set

T#:585258

Part#: 11247628034WPCKT

Ships in 1-2 days

Sale - Save 3% $ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD

Add to Wish List

Qty

Sale - Save 3%

$ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD

Add to Wish List

BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set

Ensure optimal engine performance with the BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set. This genuine BMW rod bearing set, treated with WPC technology, is specifically designed for BMW N54 and N55 engines, providing several benefits for engine longevity and reliability. Engineered with precision and quality in mind, it offers:

Enhanced durability and wear resistance for extended engine life
Reduced friction and heat buildup for improved engine performance
WPC treatment for superior lubrication and protection against metal-to-metal contact
Genuine BMW quality and reliability for peace of mind

Upgrade your BMW N54 or N55 engine with this high-quality rod bearing set for enhanced performance and longevity.

Show More Show Less

Genuine BMW Cam Gear - Exhaust

T#:34646

Part#: 11367540348

Ships in 1-2 days

3% off MSRP $ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Qty

3% off MSRP

$ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Genuine BMW Adjustment Unit, Outlet Camshaft
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Genuine BMW Bearing Shell

T#:32665

Part#: 11217627026

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E92 (2007-2013)

Sub-Categories

Enhance Your BMW Engine with WPC-Treated OEM Connecting Rod Bearings

Key Benefits:

BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results