Fuel Injectors for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Fuel injectors are responsible for delivering atomized fuel to the combustion chambers. Due to the nature of their operation, injectors are subject to extreme heat and pressures. If you have a failed injector Turner Motorsport has you covered with Genuine BMW and high performance aftermarket options.
Sort By:

Bosch - Corporate Logo
T#:33512924
Part#: 13537808089IKT
In Stock at Vendor
$ 4,040.99

This product was last offered at the strikethrough price on
03-26-2026

$ 2,735.99 USD
Free Shipping on orders $49 and up
$ 2,735.99 USD
Free Shipping on orders $49 and up
The factory fuel injectors in the M57N2 diesel engine are generally reliable, but they can still encounter the typical issues faced by direct injection systems. A common problem is carbon buildup on the injector tip, which can lead to poor spray patterns, resulting in inadequate fuel atomization. This causes reduced engine power or rough idling due to improper fuel ignition. Similar issues can arise from clogged injectors caused by contaminated fuel or internal injector failure. If your diesel engine is experiencing rough idling, reduced power, or poor fuel efficiency, this replacement injector set featuring Bosch injectors is an ideal solution to resolve these issues and restore proper engine performance. Each Bosch injector comes with preinstalled sealing washers and o-rings, making them ready for immediate installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21012586
Part#: N55-PORTINJCONMO
No longer available
No longer available
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Show More Show Less
Bosch - Corporate Logo
T#:33512921
Part#: 13537808089RKT
In Stock at Vendor
$ 4,165.99

This product was last offered at the strikethrough price on
03-26-2026

$ 2,860.99 USD
Free Shipping on orders $49 and up
$ 2,860.99 USD
Free Shipping on orders $49 and up
The factory fuel injectors in the M57N2 diesel engine are generally reliable, but they can still experience the same problems common to direct injection systems. A frequent issue is carbon buildup on the injector tip, which can lead to poor spray patterns, reducing fuel atomization. This results in lower engine power or rough idling due to improper fuel ignition. Other problems, such as clogged injectors from contaminated fuel or internal injector failure, can also cause similar symptoms. If your diesel engine is experiencing rough idling, reduced power, or poor fuel efficiency, this replacement injector set featuring Bosch injectors is an excellent solution to resolve these issues and restore optimal engine performance. Additionally, this kit includes a replacement overflow oil line, which is prone to clogging in high-mileage vehicles. Replacing it along with your fuel injectors is recommended for best results.
Show More Show Less

Fuel Injector Clinic - Corporate Logo
T#:6940371
Part#: IS804-0775H
Ships in 1 Business Day
$ 720.00 USD
Free Shipping
$ 720.00 USD
Free Shipping
High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Show More Show Less

DeatschWerks - Corporate Logo
T#:47953868
Part#: 17MX-00-1100-8
In Stock at Vendor
New Item
$ 989.00 USD
Free Shipping on orders $49 and up
For enthusiasts looking to push their BMW to the limit, the DeatschWerks fuel injector set offers a professional-grade solution for fuel management.
Fuel Injector Clinic - Corporate Logo
T#:6940372
Part#: IS804-1000H
Ships in 1 Business Day
$ 762.00 USD
Free Shipping
$ 762.00 USD
Free Shipping
High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Show More Show Less

DeatschWerks Performance Fuel Injector Set - 600cc
For Custom Applications - Will require additional tuning or modifications.
DeatschWerks - Corporate Logo
T#:6151337
Part#: 17MX-00-0600-8
In Stock at Vendor
$ 829.00 USD
Free Shipping on orders $49 and up
If you are pushing the limits of your naturally aspirated build or stepping into a moderate forced induction setup, the DeatschWerks 17MX-00-0600-8 fuel injector kit provides the reliability you need.
EU5 Fuel Injector Replacement Kit
For vehicles with a production date up to 01/2011
For vehicles with a production date up to 01/2011
Genuine BMW - Corporate Logo
T#:379220
Part#: 13537568607KT
Ships in 1-2 days
$ 2,380.50 USD
Free Shipping
$ 2,380.50 USD
Free Shipping
Genuine BMW Kit includes 6 injectors and decoupling rings - everything you need to replace your fuel injectors.

Genuine BMW Fuel Injector - EU5 Designation - E70/71 E82/88 E9X F07/1...
For vehicles with EU5 injectors and a production date up 01/2011
Genuine BMW - Corporate Logo
T#:42206
Part#: 13537568607
Ships in 1-2 days
1% off MSRP $ 385.07

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
1% off MSRP
$ 385.07

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Rough idle, misfire, or check engine light are a common problem when you have faulty fuel injectors. Fuel injectors for turbocharged BMWs have been a common failure item. Replace your injectors with this brand new injector from BMW to restore power and proper engine operation.
Show More Show Less

Genuine BMW - Corporate Logo
T#:191314
Part#: 13537808089
Ships in 1-2 days
3% off MSRP $ 768.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 743.99 USD
Free Shipping
3% off MSRP
$ 768.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 743.99 USD
Free Shipping


Genuine BMW Injector -
This item fits the following BMW Chassis:
E70 X5,E90

Fits BMW Engines including:
M57

Genuine BMW - Corporate Logo
T#:42788
Part#: 13647838440
Ships in 1-2 days
3% off MSRP $ 288.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 279.99 USD
Free Shipping
3% off MSRP
$ 288.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 279.99 USD
Free Shipping
Bosch Fuel Injector for E9X M3 with S65 V8 engine. Bosch fuel injectors provide the precision manufacturing required for advance fuel injection systems. Bosch part number 62418. Per per injector.
DeatschWerks - Corporate Logo
T#:53820913
Part#: 16S-06-2200-8
Ships in 6 Business Days
New Item
$ 1,569.00 USD
Free Shipping on orders $49 and up
For BMW owners seeking a professional-grade fuel system upgrade, the DeatschWerks 16S-06-2200-8 set provides a precision-engineered solution.


DeatschWerks - Corporate Logo
T#:53820912
Part#: 16M-30-1500-8
Ships in 6 Business Days
New Item
$ 1,589.00 USD
Free Shipping on orders $49 and up
Upgrade your vehicle's fueling system with confidence using the DeatschWerks 16M-30-1500-8 injector kit.
DeatschWerks - Corporate Logo
T#:53820931
Part#: 16S-06-2400-8
Ships in 6 Business Days
New Item
$ 1,889.00 USD
Free Shipping on orders $49 and up
For the professional tuner, the DeatschWerks 16S-06-2400-8 offers the "missing link" between raw power and refined control.
DeatschWerks - Corporate Logo
T#:53820922
Part#: 16S-06-2400-6
Ships in 6 Business Days
New Item
$ 1,449.00 USD
Free Shipping on orders $49 and up
Reliability meets raw volume in the DeatschWerks 2400cc injector series.

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:47679243
Part#: 501-0116
Ships in 7 Business Days
New Item
$ 884.99 USD
Free Shipping on orders $49 and up
$ 884.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

Precision Raceworks - Corporate Logo
T#:18003817
Part#: PRINJPLGS
Ships in 9 Business Days
Starting at $ 9.99 USD
Free Shipping on orders $49 and up
Starting at $ 9.99 USD
Free Shipping on orders $49 and up
Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195450
Part#: 601-0259
Ships in 9 Business Days
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38262760
Part#: 601-0227
Ships in 9 Business Days
$ 429.99 USD
Free Shipping on orders $49 and up
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:53044116
Part#: 13537531634RKT2
In Stock
New Item
Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD
Free Shipping on orders $49 and up
Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

Burger Motorsports - Corporate Logo
T#:44258354
Part#: BMW-N54PORT-750
Back Ordered
$ 988.00 USD
$ 988.00 USD

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

  • Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
  • Supports increased airflow to enhance engine power and efficiency
  • Integrated top-mount port injection bungs optimize fuel injector spray and delivery
  • Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
  • Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
  • High-quality, high-temperature o-rings provide lasting durability and reliability
  • Exclusively available through Turner Motorsport, ensuring trusted quality and service
Show More Show Less