The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Carbon Fiber UNIVERSAL Swivel Exhaust Tips - 4.0" - Pair are designed to provide a stunning, adjustable upgrade for any vehicle. These high-quality exhaust tips feature a unique swivel collar design, allowing them to be adjusted in any direction for the perfect fitment. Simply position the tip to your desired angle and secure it with a hex bolt tightened to 14 ft-lbs (19 Nm), ensuring it stays in place.

• Customizable Fitment: The swivel collar design allows for versatile adjustment, ensuring a perfect alignment with your vehicle's exhaust system.
• Premium Materials: Constructed with single wall stainless steel and a rolled carbon fiber edge for a high-end look and durability.
• Durable Construction: Includes chrome-plated nuts, 304SS cap screw, clamp, and insert ring for long-lasting performance.
• Sleek Appearance: Features a slant cut and matte clear coated ECS Tuning vinyl logo for a stylish finish.
• Universal Fitment: Designed to fit various vehicles; modification may be required for proper fitment.

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (5.0" Tip + 1.0" Clamping Surface)
• Outlet Size: 4.0"
• Outlet Style: Single Wall Stainless, Rolled Carbon Edge, Slant Cut
• Sold as a Pair: Includes 2 tips.

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

With the heightened popularity of the Turner E9x exhaust, we do not want to limit your choices when it comes to appearance. Pair this ultra lightweight, exotic sounding exhaust with your choice of exhaust tip! Our Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Optional 2.5" to 3.5" Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
High flow, valved, titanium mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

Enhance your BMW driving experience with the Turner Motorsport E9X 335i (N55) Valved Catback Exhaust. Designed for hearty exhaust notes and improved performance, this exhaust system offers a subtle factory-like sound with closed valves and a menacing growl when opened. Crafted with Mandrel bent dual 2.5” 304SS pipes and a high-flow valved stainless steel muffler, it ensures efficient gas flow.

The kit includes Turner Mid Pipes, a Valved Exhaust, Muffler Valve Controller Kit, and engraved Exhaust Tips. Accuseal slip-fit joints simplify installation, making it a bolt-on replacement for the OE version. The full exhaust system is available as Axle Back, Cat-back, or a full Turbo back system, providing a dual-purpose solution for both your neighbors and your desire for volume.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• Turner Engraved Polished exhaust tips
• High flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

N55 Carbon Intake:

Upgrade your N55 engine with the Turner Carbon Intake, breaking away from common setups. The dual inlet design adds functionality without compromising engine bay aesthetics. Located in the "sweet spot," the second inlet maximizes airflow and lowers intake air temps. The bellmouth velocity stack design reduces turbulence for a satisfying flutter after throttle release. The carbon fiber airbox and intake tube feature a gloss clear coat for UV protection, offering a beautiful OEM+ upgrade.

Turner Carbon Fiber Intakes are CAD-designed, ensuring optimal airflow improvement over stock. The kit includes a Carbon Intake Tube, Full Carbon 2 Piece Airbox, Bellmouth Velocity Stack Cone Filter, Billet Turbo Inlet Adapter, Silicone Coupler, and Hardware for Installation.

Key Benefits:

• Increased flow over the factory intake
• Carbon fiber airbox and intake tube with gloss clear coat
• CAD-Designed for perfect integration
• Custom high-flow air filter
• Smooth interior carbon inlet tube for optimal airflow

Design Features:

Carbon Fiber Intake Tube:

• Smooth interior without corrugations for a streamlined flow path
• Integrated carbon flange for secure mounting
• 2x2 twill weave carbon fiber construction
• Gloss finish clear coat for UV protection
• 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange

Air Box:

• 2X2 twill weave carbon fiber construction
• Gloss finish clear coat for UV resistance
• Mounts in stock location with supplied hardware

Air Filter:

• Conical hi-flow reusable air filter
• 8 ply oiled cotton gauze construction
• Bellmouth (velocity stack) filter flange inlet for reduced turbulence and maximized flow

Free ground shipping!

These connecting pipes allow the Supersprint section 2 exhaust pieces to fit to the original catalytic converters. This makes the system an easy cat-back install for the E90 sedan and E91 wagon models (not needed for E92 coupe or E93 convertible models). These are stainless steel with integrated clamp-on ends.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:connecting pipes

connects to:stock section 1 secondary cats; Supersprint section 2

material:T304 stainless steel

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon

New to our line of exceptional performance upgrades for your BMW, the Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Turner Engraved Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
Turner Engraved Brushed exhaust tips
High flow, valved, stainless steel mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers