At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our Turner S65 Carbon Intake is a monster that perfectly compliments the high revving 4.0l V8 engine. Add in a full carbon plenum and you have a recipe for greatness! The intake benefits start right at the motor; the plenum offers a larger interior volume and full carbon design which helps boast the intoxicating roar. Directly connected to the plenum is a full carbon intake tube with a substantially larger cross sectional area with smooth transitions which results in more airflow available to the engine in high demand scenarios. The inlet tube mounts securely to the full carbon heat shield and is mounted in factory airbox locations while retaining the factory cold air induction tract from the hood. Housed inside the heat shield is a behemoth cone filter to ensure proper filtration and maximize airflow. Turner's S65 intake and plenum is designed with air flow and induction in mind. The intake flows like no other; during testing, the Turner intake outperformed the flow-bench at over 750CFM, a massive improvement over the factory intake.

Here are the benefits:

Full carbon plenum and intake for a full engine bay transformation
You get a beautiful carbon heatshield, one of the only full carbon fiber heatshields available.
All the flow - the air on demand will make sure your engine always has room to breathe.
Increased throttle response.
Added induction noise for an intoxicating driving experience.
PART DESIGN:

Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment
Full Carbon Plenum construction with internal bracing and velocity stacks
Hood Inlet Scoop - Directs the flow of cool, ambient air to the heat shield, and directly into the air filter. Seals off with the factory rubber gasket on the lower side of the hood inlet.
Full Carbon Fiber Heat Shield Assembly that utilizes OEM air box mounts and integrates with the factory air intake tract from the hood.
Monstrous 9" cone air filter to maximizes filtration that is able to be serviced/cleaned.
7"x5" Carbon Fiber Inlet Tube providing smooth, direct airflow from the behemoth air filter directly into the plenum.
Fully compatible with the OEM Secondary Air Injection emissions system. Factory hose lock and location.
Full carbon fiber plenum with bracing and carbon velocity stacks.
KIT CONTENTS

Carbon Fiber Plenum
Carbon Fiber Heat Shield
Carbon Fiber Intake Tube
Plenum Silicone Coupler
9" Cone Air Filter
Installation Hardware
PRODUCT DEVELOPMENT

Turner S65 Intake System was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy

Upgrade your BMW with the Turner Motorsport E9X M3 (S65) Valved Axle-back Exhaust, offering a blend of robust exhaust notes and enhanced performance. This system delivers a menacing growl when the valves are open, providing an aggressive driving experience. Plus, it's emissions legal, retaining all four factory cats, making it ideal for various preferences and regulations.

The exhaust features Mandrel bent dual 2.5” 304SS pipes with a brushed finish, high-flow valved stainless steel mufflers, and easy-fit Accuseal slip-fit joints. The kit includes an axle-back exhaust with X pipe, adapter pipes for factory mid pipes, muffler valve controller kit, and engraved exhaust tips. Enjoy the Turner Motorsport E9X M3 full exhaust system, balancing volume for both your neighbors and your desire for an impactful exhaust.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• High-flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Retains factory emissions
• Kit includes axle-back exhaust, adapter pipes, muffler valve controller kit, and engraved exhaust tips

Carbon Fiber S65 Intake:

Elevate your S65 engine with the Carbon Fiber S65 Intake from Turner. This gloss carbon fiber intake not only adds a roaring induction noise but also outperforms the factory intake by over 35%. Revel in the improved audible experience, the beauty of carbon fiber in your engine bay, and enhanced engine performance.

The Turner S65 Carbon Intake is designed with a larger cross-sectional area, ensuring more airflow to the engine in high-demand scenarios. The full carbon intake tube connects to a carbon heat shield housing a large cone filter. Tested to outperform the factory intake with over 750CFM, this intake offers benefits like increased throttle response and a unique, stand-out design.

Benefits:

• Unique design for a standout appearance
• Full carbon fiber heat shield
• Improved airflow and engine breathing
• Increased throttle response
• Added induction noise for an exhilarating driving experience

Part Design:

• Designed and engineered in-house using 3D laser scanning and CAD technology
• Hood Inlet Scoop for directing cool air
• Full Carbon Fiber Heat Shield Assembly
• Monstrous 9" cone air filter
• 7"x5" Carbon Fiber Inlet Tube
• Fully compatible with OEM Secondary Air Injection emissions system

Kit Contents:

• Carbon Fiber Heat Shield
• Carbon Fiber Intake Tube
• Plenum Silicone Coupler
• 9" Cone Air Filter
• Installation Hardware

Product Development:

The Turner S65 Intake System undergoes rigorous development, including FARO laser scanning, 3D CAD modeling, in-house prototyping, and extensive testing on a Mustang AWD 500 SE dyno and Superflow SF-750 Flowbench.

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

• Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
• Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
• Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
• Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
• Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

• Precise injection control for improved performance
• OEM-approved water methanol injection pump for durability
• 100% methanol-resistant components for long-lasting use
• Guaranteed leak-free operation with ACU-SEAL compression fittings
• Increases induction charge density and fuel octane levels for full power