BMW Cooling System Parts & Accessories for BMW Z Series E85/6 (2003-2008)

Cooling hoses tend to crack over time after going through countless heating and cooling cycles. This can lead to leaks or air bubbles in the cooling system that lead too coolant loos, hurts cooling potential, or could possibly cause damage from excess heat.

Fits the following BMWs:
Submodels with N52 3.0L engine.

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

For BMW owners seeking enhanced airflow or tighter engine compartment clearance, Turner Motorsport presents a Universal Fan. Ideal for applications like aftermarket turbo setups, this fan ensures optimal cooling performance. Please note that this fan is universal and may require modification to fit your specific application. Crafted in Italy, this fan boasts dimensions of 16.30in x 15.75in x 3.47in and provides an airflow of 2024 CFM.

• Enhanced airflow for improved engine cooling
• Ideal for applications with tight tolerances, such as aftermarket turbo setups
• Universal design allows for versatile installation
• Crafted in Italy for quality assurance
• Compact size with powerful airflow capacity

Engine running a little hot or is the temp gauge not telling you anything? The thermostat might be the likely problem. Many cooling issues start with the thermostat. This is electronically controlled by the engine computer based on the cooling demands from the engine. And cooling components are working harder than ever. Engine performance is also dependent on temperature - as temperatures rise and pass a certain threshold the engine computer will begin reducing power. Stay on top of your cooling maintenance by replacing critical components preventatively. This replacement thermostat fits many of the N51 N52 N53 N54 6 cylinder engines and is an OEM Behr part.  

The thermostat is located along with the water pump on the side of the engine. To gain access for removal you may need to remove the water pump as well. If the water pump is removed you MUST replace its mounting bolts. You can add them from the options below. We also have a bundled package that includes the water pump, mounting screws, connecting hose, and clamps if you want to replace everything together (recommended).  

For the following BMW engines:
N54 N52

Enhance your BMW's performance and protect its engine with this high-quality oil cooler kit

Even under ideal driving conditions, elevated oil temperatures can lead to decreased lubrication efficiency and pressure. With this oil cooler, you can maintain optimal oil temperatures for peak driving performance.

Kit Includes:

• Four feet of stainless braided line for durability
• Adapter fittings for easy installation
• Oil filter sandwich adapter for seamless integration

Specifications:

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN
• Includes Thermostat for precise temperature and flow control

*WARNING: This product may be subject to Proposition 65 regulations in California. For more information, visit www.P65Warnings.ca.gov.

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Bavarian Autosport Water Pump (11517632426)

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Pierburg Full Aluminum Water Pump (11515A05704) Installation:

- Click HERE for Installation Instructions -

The cooling system is a weak point on any E46. Many cars develop issues in as few as 50,000 miles.

Overheating an inline 6 engine almost always results in large repair bill, and sometimes a warped cylinder head.

Replace yours with a high-quality OEM Nissens radiator to prevent further issues and potential overheating.