BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

CTS - Corporate Logo
T#:30430708
Part#: CTS-E90-E93-DFSB
Ships in 7 Business Days
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping

The CTS Turbo 7.5' Race FMIC upgrade for the BMW E82 135i and BMW E90/E92/E93 335i is an excellent upgrade for those pushing past 800hp.

This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup.  Improvements can be attributed to the high-density bar-and-plate intercooler core and high-flow cast aluminum end tanks.

End tanks are flared to ensure you don’t have to worry about your boost tubes blowing off or leaking.  If that wasn’t enough for you, this kit also uses 4-ply silicone couplers and stainless steel T-Bolt clamps.

Note: On some models, a small amount of trimming may be required to the plastic intercooler shroud; no trimming of the bumper is necessary. This will not affect the integrity or aesthetics of the bumper.

Features:

  • Huge 11' tall x 7.5' thick high-density bar-and-plate core
  • Cast aluminum end tanks, CAD designed for maximum efficiency
  • Easy install with only minimum trimming required
  • Intercooler pipe, silicone coupler, and t-bolts clamps included

It fits all E82, E90, E92, and E93 vehicles, LHD and RHD models; RWD and X-drive models.

Show More Show Less
URO - Corporate Logo
T#:43750221
Part#: 13547556118
Ships in 1-3 days
$ 177.99 USD
Free Shipping on orders $49 and up
The sensors on your throttle body can wear out over time. These sensors control vital engine features through the engine computer. If your vehicle is throwing a check engine light about throttle position, this may be the issue. The only solution is to replace your throttle body.
Show More Show Less

Mishimoto - Corporate Logo
T#:51075063
Part#: MMICP-N55-11
Ships in 3 Business Days
New Item
$ 349.99 USD
Free Shipping on orders $49 and up
Upgrade your N55's charge air system with the Mishimoto Performance Charge Pipe Kit.

SnowPerformance - Corporate Logo
T#:21308460
Part#: 40069
In Stock at Vendor
$ 309.99 USD
Free Shipping on orders $49 and up
Direct port injection plate for clean WMI installs ​ Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: 3.0 N54/N55 Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. *Will need to buy nozzles, lines and distribution block* *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning
Show More Show Less
Forge - Corporate Logo
T#:46890667
Part#: FMEDV104R
Ships in 2 Business Days
New Item
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Sep 16, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21176922
Part#: FSB-N54
Ships on Sep 16, 2026
$ 150.00 USD
$ 150.00 USD
The BMS JB4 FSB Water/Methanol Injection (WMI) controller allows the JB4 to control your WMI pump and solenoid for dynamic progressive flow mapping. It also allows the JB4 to monitor pump current to overlay it with CANbus feedback for tuning parameters such as fuel trims and fuel pressure to provide a comprehensive flow-based safety system.
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:35154933
Part#: VTT-SILICONE-CP-
Ships in 10 Business Days
$ 125.99 USD
Free Shipping
$ 125.99 USD
Free Shipping

VTT is proud to offer the very best Cold Side charge pipe solution for the BMW E Series N54 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.  They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat.  Another huge benefit is only TWO connections which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off.

This N54 pipe has a flange installed to support a Turbosmart BOV.

This is the EASIEST N54 charge pipe on the market to install hands down. Install takes about half an hour even if you are inexperienced with working on your own car, can take as little as 15-20 minutes if you have had it apart a few times.

The kit includes:

VTT Cold Side Silicone Charge pipe

2 VTT Branded CNC adapters to mount the map sensor, and a methanol bung

1 VTT Branded CNC adapters for the TB inlet

2 VTT branded T-Bolt Clamps

1 1/8 NPT port is included in the charge pipe for methanol

Show More Show Less
Burger Motorsports - Corporate Logo
T#:38621402
Part#: BMS-INTCLR-N5455
Ships on Sep 16, 2026
$ 329.00 USD
Free Shipping on orders $49 and up
$ 329.00 USD
Free Shipping on orders $49 and up
The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".
Show More Show Less
Burger Motorsports - Corporate Logo
T#:589530
Part#: N54BOVVACADPT
Ships on Sep 16, 2026
$ 59.00 USD
Free Shipping on orders $49 and up


AFE - Corporate Logo
T#:637605
Part#: 54-13053R
In Stock
$ 399.00 USD
$ 399.00 USD
Rein - Corporate Logo
T#:34080768
Part#: 11537558903
In Stock
$ 59.99 USD
Free Shipping on orders $49 and up

Turbo Charger Cooling Hose - Return is essential for maintaining the efficiency and performance of your turbocharged vehicle. This high-quality return hose is specifically designed to handle the intense heat and pressure generated by the turbocharger system. Manufactured using durable materials, this cooling hose ensures optimal coolant flow to keep your engine running at peak performance. Available at Turner Motorsport, it’s the perfect upgrade or replacement part for your vehicle’s turbo system.

  • High-performance cooling solution for turbocharged engines
  • Ensures efficient coolant circulation to prevent overheating
  • Manufactured from heat-resistant and durable materials
  • Direct fit for a hassle-free installation
  • Designed for long-lasting durability and reliability
  • Compatible with a variety of makes and models

This Turbo Charger Cooling Hose - Return from Turner Motorsport is the ideal choice for any turbocharged engine, ensuring your vehicle operates smoothly and efficiently.

Show More Show Less
Injen - Corporate Logo
T#:372585
Part#: SP1125P
EO#: D-476-8
In Stock at Vendor
$ 679.99 USD
Free Shipping
$ 679.99 USD
Free Shipping
Enhance your BMW's performance with the Turner Motorsport Injen SP Series Intake System . Featuring MR technology, this intake system provides a significant power boost of +13 hp and +15 ft-lb torque . The MAF sensor-friendly dry filter element ensures optimal airflow and engine protection. Crafted from T-6061 billet aluminum , this intake system is built to last and comes with a lifetime warranty through Injen. Made in the U.S.A., it's available in a polished finish, with the option of wrinkle black (part number es2500819). Regular air filter service intervals are essential for maintaining engine performance and preventing costly damage.
Show More Show Less

SnowPerformance - Corporate Logo
T#:21374143
Part#: SNO-806-BRD
In Stock at Vendor
$ 10.99 USD
Free Shipping on orders $49 and up

SnowPerformance - Corporate Logo
T#:21374122
Part#: SNO-N0250
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Forge - Corporate Logo
T#:373768
Part#: FMINTBM
Ships in 3 Business Days
$ 1,271.99 USD
Free Shipping on orders $49 and up
Forge Motorsport discovered the perfect combination for your N55 with this bar and plate design intercooler. The intercooler averaged drops of 15 degrees celcius compared to a stock intercooler. Installation of this larger intercooler is an easy bolt-on without any modification or cutting necessary. Complete kit includes new silicone hoses and clamps with instructions.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:40072445
Part#: N54PHOENIXPIMAN
Ships on Sep 16, 2026
$ 1,138.00 USD
$ 1,138.00 USD
Comes with 950cc injectors!
Forge - Corporate Logo
T#:384401
Part#: FMDV-SHIM
Ships in 3 Business Days
$ 4.00 USD
Free Shipping on orders $49 and up
These shims allow you to manually adjust preload on Forge N54 Diverter Valves.

Vargas Turbo Technologies - Corporate Logo
T#:557961
Part#: VTT-PCV-ADAPTER
Ships in 10 Business Days
$ 145.99 USD
Free Shipping
$ 145.99 USD
Free Shipping

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.

This must be used in conjunction with  the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.

Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip

This part fits the following BMW engines: 
2006-2012 N54

 

Show More Show Less

Burger Motorsports - Corporate Logo
T#:40072449
Part#: N54PHOENIXPORTIN
Ships on Sep 16, 2026
$ 649.00 USD
$ 649.00 USD
Manifold only!
CTS - Corporate Logo
T#:23185030
Part#: CTSIT910
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
The kit offers an OEM like fit, with an aggressive aftermarket sound.
SnowPerformance - Corporate Logo
T#:21308474
Part#: SNO-900
Ships in 1 Business Day
$ 10.99 USD
Free Shipping on orders $49 and up
Straight, rectangular single nozzle holder. 1/8" NPT.


SnowPerformance - Corporate Logo
T#:21374115
Part#: SNO-N0300
Ships on Sep 16, 2026
$ 31.99 USD
Free Shipping on orders $49 and up
Rein - Corporate Logo
T#:378475
Part#: 5173125797120BLK
Ships in 3 Business Days
$ 175.99 USD
Free Shipping
$ 175.99 USD
Free Shipping
Replace your cracked or frayed vacuum lines. 3.5mm
SnowPerformance - Corporate Logo
T#:2317850
Part#: SNO-82082R
In Stock at Vendor
23% off MSRP $ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD
Free Shipping on orders $49 and up
23% off MSRP
$ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD
Free Shipping on orders $49 and up

Forge - Corporate Logo
T#:46890666
Part#: FMEDV104A
Special Order: No Guaranteed ETA
New Item
$ 379.99 USD
Free Shipping on orders $49 and up
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.
Show More Show Less

Rein - Corporate Logo
T#:378471
Part#: N203531-20
Ships in 3 Business Days
$ 363.52 USD
Free Shipping
$ 363.52 USD
Free Shipping
Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID

Rein - Corporate Logo
T#:38161722
Part#: 11667558344
Ships in 3 Business Days
$ 177.99 USD
Free Shipping on orders $49 and up
Vargas Turbo Technologies - Corporate Logo
T#:51883668
Part#: VTT-ALUMO-1HB
Ships in 10 Business Days
New Item
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping
The Vargas Aluminum Turbo Outlet is the definitive solution for BMW owners looking to eliminate the weak points of the stock plastic and rubber charge tract.


SnowPerformance - Corporate Logo
T#:21308472
Part#: SNO-40016-BRD
In Stock at Vendor
$ 260.99 USD
$ 260.99 USD
7 gal. water-methanol tank upgrade braided stainless line (w/brackets, solenoid, hose & all necessary fittings) (15lx17hx9w)
Vargas Turbo Technologies - Corporate Logo
T#:51813330
Part#: VTT-N54-UPCVC
Ships in 10 Business Days
New Item
$ 14.99 USD
Free Shipping
$ 14.99 USD
Free Shipping
Maintain the health of your BMW’s engine with the VTT Upgraded Billet PCV Cover.
Nissens - Corporate Logo
T#:594427
Part#: 17517540035
In Stock at Vendor
$ 406.99

This product was last offered at the strikethrough price on
05-08-2026

$ 395.99 USD
Free Shipping on orders $49 and up
$ 395.99 USD
Free Shipping on orders $49 and up
The intercooler in your vehicle is a rather vulnerable component, being susceptible to stone hits, debris and other damage. An intercooler with bent cooling fins will be less efficient, so replace it with a new one to restore performance.
Show More Show Less


SnowPerformance - Corporate Logo
T#:589571
Part#: SNO-40111.40112
In Stock at Vendor
Starting at $ 359.98 USD
Free Shipping on orders $49 and up
Starting at $ 359.98 USD
Free Shipping on orders $49 and up
Choose either V-band or hose camp style rings to add methanol injection easily to almost any vehicle.
Rein - Corporate Logo
T#:53856280
Part#: 13717615026
Back Ordered
New Item
$ 209.99 USD
$ 209.99 USD
Rein Automotive OE Air Intake Hose is a precision-manufactured component designed for teams and owners who refuse to compromise on volumetric efficiency.

Vargas Turbo Technologies - Corporate Logo
T#:51778126
Part#: VTT-OCC-1-LOW-SI
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
The Vargas Low Side PCV Fitting is the essential upgrade for BMW owners looking to optimize their crankcase ventilation without replacing the factory valve cover.

Vargas Turbo Technologies - Corporate Logo
T#:51813316
Part#: VTT-TIAL-BLACK
Ships in 10 Business Days
New Item
$ 52.99 USD
Free Shipping
$ 52.99 USD
Free Shipping
Maintain the peak performance of your forced induction system with the VTT Black TiAL BOV Spring.
Genuine BMW - Corporate Logo
T#:14929
Part#: 13547597871
Ships in 1-2 days
6% off MSRP $ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping
6% off MSRP
$ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping


Genuine BMW Throttle -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW - Corporate Logo
T#:14927
Part#: 13547556119
Ships in 1-2 days
6% off MSRP $ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping
6% off MSRP
$ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping


Genuine BMW Throttle
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less
Genuine BMW - Corporate Logo
T#:43387
Part#: 13717599293
Ships in 1-2 days
2% off MSRP $ 606.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 591.99 USD
Free Shipping
2% off MSRP
$ 606.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 591.99 USD
Free Shipping


Genuine BMW Charge Air Induction Tract -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N55


Rein - Corporate Logo
T#:378472
Part#: 11731259996-1
In Stock
$ 6.11 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed vacuum lines. 3.5mm

Genuine BMW - Corporate Logo
T#:47152
Part#: 17517540035
Ships in 1-2 days
6% off MSRP $ 734.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 690.99 USD
Free Shipping
6% off MSRP
$ 734.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 690.99 USD
Free Shipping


Genuine BMW Charge-Air Cooler
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T,N55

Show More Show Less
ECS - Corporate Logo
T#:19825269
Part#: 2101
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:43211
Part#: 13717556549
Ships in 1-2 days
3% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping
3% off MSRP
$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping


Genuine BMW Air Duct
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T



Genuine BMW - Corporate Logo
T#:407899
Part#: 11667558344
Ships in 1-2 days
6% off MSRP $ 730.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 686.99 USD
Free Shipping
6% off MSRP
$ 730.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 686.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:360396
Part#: E90-330-MANIKT
Ships in 1-2 days
$ 2,016.18 USD
$ 2,016.18 USD