BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Burger Motorsports Drop-In Air Filter - N54 135/335/535

Not for sale or use in the state of California.

T#:556764

Part#: BMS-N54-DIAF

Ships on Sep 21, 2026

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E89, E60, E61 ...

T#:398689

Part#: FB494/20

In Stock at Vendor

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

High Flow Water Methanol Check Valve

T#:2317849

Part#: SNO-8CV-QC

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

CTS Turbo Front Mount Intercooler Kit - Performance Direct Fit - E82/...

T#:381381

Part#: 135335FMICKITDF

Ships in 7 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The CTS Turbo direct fit FMIC Kit for the BMW 135i and BMW E90/E92/E93 335i is an excellent upgrade for any stock or modified cars. This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup. Improvements can be attributed to the high density bar-and-plate intercooler core, and high-flow cast aluminum end tanks. End tanks are flared to ensure you don’t have to worry about your boost tubes blowing off or leaking. If that wasn’t enough for you, this kit also uses 4ply silicone couplers and stainless steel T-Bolt clamps. Core dimensions are 20' long x 7' deep x 6' high, making this one of the largest direct fit intercoolers on the market. In our research, larger cores do not yield better results and do not fit properly in the bumper. Note: On some models, a small amount of trimming may be required to the plastic intercooler shroud; no trimming of bumper is necessary. This will not affect the integrity or aesthetics of the bumper. Fits LHD and RHD models; RWD and X-drive models. This core is capable in supporting up to 550whp.

Show More Show Less

N55 TurboSmart KOMPACT EM DV - Dual Port

T#:7734722

Part#: N55TURBOSMARTDV

Ships in 10 Business Days

$ 338.99 USD

Add to Wish List

Qty

$ 338.99 USD

Add to Wish List

Upgrade your BMW N55's turbocharger performance with the award-winning Kompact EM series Diverter Valves from VTT. These plug-and-play valves are the world’s first, offering seamless installation without adapters or extra assembly. By retaining OE control, they ensure optimal operation while minimizing leakage and enhancing turbocharger response. Ideal for owners of hybrid or larger flowing turbos, these valves boast superior thermal performance, providing a must-have solution for maximizing boost without stressing the turbocharger.

Seamless plug-and-play installation
Minimizes leakage for enhanced turbocharger performance
Retains OE control for optimal operation
Superior thermal performance to maximize boost without stressing the turbocharger

Show More Show Less

Magnum FORCE Stage-2 Pro 5R Cold Air Intake System - E8X, E9X N55 ...

T#:557741

Part#: 54-31912

In Stock

$ 268.00 USD

Add to Wish List

Qty

$ 268.00 USD

Add to Wish List

Large 5-Layer Performance Air Filter:
This sealed intake system utilizes a pre-oiled, large 5" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 21, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

Hobb's Switch

T#:403482

Part#: ACC-HOBBS

Ships on Sep 21, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

MagnumFORCE Intake - Stage-2 Pro Dry S -- E9X E82/88 N52 3.0L ...

CARB certified for sale in all 50 states

T#:341276

Part#: 51-81012-B

EO#: D-550-38

In Stock

$ 451.00 USD

Add to Wish List

Qty

$ 451.00 USD

Add to Wish List

AFE Summer Rebate Form

This Stage 2 Sealed Intake produces up to 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.

Show More Show Less

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE - Does not include BOV) ...

T#:23185032

Part#: CTSIT900

Ships in 7 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

Designed for use with TiAL Q atmospheric blowoff valve
Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
CNC machined MAP sensor flange for seamless OEM installation
Includes 4-ply silicone connectors and stainless steel clamps for secure fit
Features two water-methanol bungs and laser-etched CTS Turbo logo
Enhances boost holding capacity and provides an aggressive aftermarket sound

Show More Show Less

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

MagnumFORCE Intake - Stage-2 Pro Dry S

CARB certified for sale in all 50 states

T#:341697

Part#: 51-81012-C

EO#: D-550-38

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

This Stage 2 Sealed Intake produces up to 12hp and 15lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.

Show More Show Less

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

N54 Charge Pipe With BOV

T#:594513

Part#: VTT-CHARGEPIPE-2

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Whenever upgrading your N54 Vargas suggest going to a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the prone to cracking plastic charge pipe, and plastic DV’s. *Door Buster Special - New Product* The charge pipe is made from high-quality aluminum, tig welded, has two 1/8' NPT meth bungs, and a flange to fit Turbosmart Raceport The Raceport will include the proper orange spring pre-installed. The Charge pipe kit includes Kit includes: Charge pipe 45-degree silicone adapter hose 2 1/8″ NPT plugs Two T-bolt clamps Two DV block off caps (Depends on Model) Turbosmart Raceport BOV (optional) 24″ Of Vacuum line

Show More Show Less

Continental Throttle Body Assembly

We Price Match - Give Us A Call or Chat!

T#:580192

Part#: A2C59514303

Ships in 2 Business Days

$ 456.74

This product was last offered at the strikethrough price on
07-29-2026

$ 456.71 USD

Add to Wish List

Qty

$ 456.71 USD

Add to Wish List

Genuine BMW Throttle -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

In Stock at Vendor

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

MMX Upper Charge Pipe Kit - N55 E8x/E9x

For Vehicles with N55 Engine

T#:4538270

Part#: MMR02-0201

Ships in 2 Business Days

$ 308.99 USD

Add to Wish List

Qty

$ 308.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered E8x/E9x. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Replacement high-flow aluminum charge pipe with CNC leak-free connection Silicone coupler hose and two stub hoses Replacement c-clip Jubilee clips o-ring

Show More Show Less

Snow Performance Boost Cooler Stage 2 Direct Port Water/Methanol Inje...

T#:589550

Part#: SNO-2169-BRD

In Stock at Vendor

$ 1,503.99 USD

Add to Wish List

Qty

$ 1,503.99 USD

Add to Wish List

Direct-port injection is the optimal way to run water/methanol and this kit will provide optimal, uniform placement for all six injectors.

OEM Mahle Air Filter - N52 3.0L

T#:369093

Part#: 13717542294

Ships in 1 Business Day

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Replacement air filter for the stock airbox, made by OEM supplier Mahle.

VRSF Stainless T-Bolt Clamp Kit For VRSF Intercoolers

We Price Match - Give Us A Call or Chat!

T#:27138532

Part#: 305416

Back Ordered

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Injen Intake Kit for E82 135i - Black

CARB certified for sale in all 50 states

T#:3196

Part#: SP1125WB

EO#: D-476-8

In Stock at Vendor

$ 679.99 USD

Add to Wish List

Qty

$ 679.99 USD

Add to Wish List

Designed using Injen�s patented MR Technology process for the greatest horsepower and torque gains while maintaining a factory safe air and fuel ratio. Features aerospace quality aluminum construction to save weight and improve corrosion resistance. AMSOIL Ea Nanofiber filters provide better airflow while maintaining a high filtration rate with no oil requiredIncludes TIG welded hardware and adaptors for maximum straightBacked by Injen Technology�s limited lifetime warranty

This item fits the following BMWs:
2008+ E82 BMW 135i

Show More Show Less

COBB Tuning High Flow Air Filter - E82/88 E9X N55 3.0L

T#:379072

Part#: 7B1110

Ships in 3 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

Stock air filters are not designed for getting the highest flow rate possible. This causes air flow restrictions that prevent the highest possible power from the stock design. With COBB's BMW N55 High Flow Air Filter, designed to directly replace the stock air filter ( BMW Part # 13717599285), you can expect the highest flow rates from a stock style design while still maintaining maximum filtration.

BMW N55 High Flow Filter

Washable/Reusable Cotton Woven Media
Precision Molded for Direct Drop In To The Factory Air Box
Increased Air Flow While Maintaining Filtering Efficiency
Pre-Oiled
Compatible with COBB Accessport OTS Maps

Show More Show Less

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

aFe Momentum GT Pro DRY S Cold Air Intake System - E9X 335i N54 ...

T#:557700

Part#: 51-76306

Ships in 3 Business Days

$ 451.00 USD

Add to Wish List

Qty

$ 451.00 USD

Add to Wish List

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Show More Show Less

Vargas N54 Billet Center Feed Intake Manifold - Customize Your Own! ...

T#:6061725

Part#: VTT-N54ITKM

Ships in 10 Business Days

Starting at $ 1,322.99 USD

Add to Wish List

Starting at $ 1,322.99 USD

Add to Wish List

VTT is proud to release their center feed N54 intake manifold. Vargas performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build. This manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required). Available in five different finishes! Features: Full billet production using aircraft 6061-T6. NOT sheet metal Can be run Direct Injection only, or allows for EASY addition of Port Injection to any N54 engine with no plates, or bad injection angles DI Kit Contents: Pi Block off plugs to seal the ports for a compact design, no blocked off fuel rails All fittings, or plugs for Vacuum/Boost ports PI Kit Contents: Complete fuel rail with required fittings All hose connections required to run fuel lines using genuine Parker 801 hose and AN fittings All fittings, or plugs for Vacuum/boost ports Optional Injector Choice DI only completely removes the fuel rail for a compact look. Flow optimized for increased horsepower at top of the RPM band A variety of ports on the bottom, which allow you to run any of modular setups for PCV, vacuum needs A significant advantage in flow over stock manifold at top of the RPM range Weight is 13.6 lbs. With the Fuel Rail Option for additional injectors provided by DeatschWerks (550cc or 1000cc) Controller for port injection available separately

Show More Show Less

Momentum GT PRO 5R Cold Air Intake System - E8X, E9X N55

T#:557725

Part#: 54-76313

In Stock at Vendor

$ 435.00 USD

Add to Wish List

Qty

$ 435.00 USD

Add to Wish List

Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.

High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2011-2013 E82/88 135i N55
2011-2013 E9X 335i N55
2011-2015 E84 X1 35i

Show More Show Less

URO Premium Crank Case Vent Hose - N55

For vehicles without blow by heater

T#:1918450

Part#: 11127590163

Ships in 1 Business Day

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

This item fits the following BMW Chassis: E82,E90,E92,E93,F06,F15,F16 Fits BMW Engines including: N55

82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 21, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Mass Air Flow Sensor

T#:47644906

Part#: 13627593624

Ships in 1 Business Day

$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 173.99 USD

Add to Wish List

Qty

$ 173.99 USD

Add to Wish List

OEM Hella Boost Pressure MAP Sensor - BMW N54 N55 3.0L

T#:11595374

Part#: 13629797773

In Stock at Vendor

$ 153.99

This product was last offered at the strikethrough price on
05-07-2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

This sensor is used in the air intake system to monitor boost for protection from over-boost.

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...

T#:21308451

Part#: 40069-2

In Stock

$ 742.99 USD

Add to Wish List

Qty

$ 742.99 USD

Add to Wish List

Direct port injection plate with 1.5GPH nozzles for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

Genuine BMW Upper Intake Charge Pipe - E82/88 E9X N55 3.0L

For vehicles with a production date up to 03/2011

T#:43388

Part#: 13717599294

Ships in 1-2 days

6% off MSRP $ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD

Add to Wish List

Qty

6% off MSRP

$ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD

Add to Wish List

Genuine BMW Charge Air Induction Tract -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N55

Intake Manifold Upgrade Kit - E82/88 128, E9X 328, E60 528 N52 3.0L ...

T#:376157

Part#: 11617559523KT2

Ships in 1-2 days

$ 2,016.99 USD

Add to Wish List

Qty

$ 2,016.99 USD

Add to Wish List

Upgrade your BMW N52-powered vehicle with the high-performance E90 330i 3-stage intake manifold. Compared to other N52-powered models, the 330i boasts the highest horsepower due to its 3-stage manifold design. This manifold features two DISA valves that optimize air diversion to the cylinders, maximizing power extraction from the engine.

Key benefits of the 3-stage manifold include:

Efficient air distribution to cylinders for enhanced power output.
Improved fuel adjustments by the ECU for optimal performance.
Bolts onto any N52 version and, with an ECU flash, can add up to 42hp.

The kit includes:

330i intake manifold
Both DISA valves
Gaskets

For additional power gains, consider purchasing the N52 Euro Air box (ES#2072577) alongside this manifold. Please note that an ECU reflash is necessary for proper functionality of the intake.

Enhance your N52 engine's performance and power output with this comprehensive E90 330i 3-stage intake manifold kit.

Show More Show Less

Brake Vacuum Pump - E90 E92 E60 E70

T#:14640

Part#: 11667558344

Ships in 1-2 days

$ 233.16 USD

Add to Wish List

Qty

$ 233.16 USD

Add to Wish List

This is the OEM Peirberg Power brake booster vacuum pump for BMW's with the N51 or N52 6 cylinder engines.

This item fits the following BMWs:
2008-2013 E82 BMW 128i Coupe
2006-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2004-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i 528i xDrive
2008-2010 E83 BMW X3 3.0si
2011+ F25 BMW X3 xDrive28i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Genuine BMW Air Filter - E82 E84 E88 E90 E92 E93 X1 335 N55 3.0L ...

T#:348490

Part#: 13717599285

Ships in 1-2 days

15% off MSRP $ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Qty

15% off MSRP

$ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

E90 330i N52 Intake Manifold

T#:12552

Part#: 11617559523

Ships in 1-2 days

5% off MSRP $ 1,080.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,031.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,080.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,031.99 USD

Add to Wish List

This is the Genuine BMW intake manifold from the N52B30H0 engine used in the 330i, Z4 3.0si, X5 3.0si, and others. It's also used in the N51 SULEV engines. This is the dual DISA version (but DISA valves not included).

Show More Show Less

Genuine BMW Intake Duct - Right - E82, E88

T#:43185

Part#: 13717547591

Ships in 1-2 days

2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

2% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Intake Duct, Right
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Fits BMW Engines including:
N51,N51,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Air Intake Boot

T#:43158

Part#: 13717536004

Ships in 1-2 days

5% off MSRP $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Qty

5% off MSRP

$ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Genuine BMW Rubber Boot -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N51,N52,N52N

Genuine BMW Intake Manifold - E60 E82 E88 E90 E91 E92 E93 Z4 ...

T#:36540

Part#: 11617559524

Ships in 1-2 days

5% off MSRP $ 1,080.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,031.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,080.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,031.99 USD

Add to Wish List

Genuine BMW Intake Manifold -
This item fits the following BMW Chassis:
E82,E83 X3,E85,E90,E92,E93

Fits BMW Engines including:
N52,N52N

Genuine BMW Intake Upper Charge Pipe - E82 135i 1 M Coupe N54 3.0L ...

T#:43348

Part#: 13717590305

Ships in 1-2 days

6% off MSRP $ 480.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 451.99 USD

Add to Wish List

Qty

6% off MSRP

$ 480.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 451.99 USD

Add to Wish List

Genuine BMW Charge Air Induction Tract
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Fits BMW Engines including:
N54,N54T

Genuine BMW Intake Duct - Left - E82, E88

T#:43186

Part#: 13717547592

Ships in 1-2 days

2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

2% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Intake Duct, Left
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Fits BMW Engines including:
N51,N51,N52N,N54,N54T,N55

Show More Show Less