BMW Engine Parts for BMW 1 Series E82 (2008-2013)

BMW - Start/Ignition/Glow plug relay

T#:40342871

Part#: 12135A06753

Special Order: No Guaranteed ETA

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

This BMW/MINI ignition coil is designed with enhanced core windings to boost spark energy and promote a quicker, more efficient combustion. The result is improved low-end torque and increased horsepower at higher RPMs. While the exact gains depend on your engine’s condition, noticeable performance improvements and better fuel efficiency can be expected.

Show More Show Less

Pierburg Vacuum Pump - BMW N52 3.0L

T#:380841

Part#: 11667519457

Special Order: No Guaranteed ETA

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

If your vacuum pump is noisy then it is only a matter of time before it fails, leading to idling issues and a loss of braking power. Replace yours with this OEM Pierburg Vacuum Pump to ensure the smooth operation of the vacuum system.

Show More Show Less

Meyle Oxygen Sensor - Pre-Cat Bank 2 - E9X E60 E82 N52

We Price Match - Give Us A Call or Chat!

T#:5944212

Part#: 11787558073

Special Order: No Guaranteed ETA

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high-quality Meyle sensor to turn off your check engine light and restore fuel mileage. This is a Meyle oxygen sensor for BMWs with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Replacement for BMW # 11787558073 and 11787537984. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

TRW Engine Intake Valve - BMW N20 N55

T#:31092511

Part#: 11347583777

Special Order: No Guaranteed ETA

$ 6.08

This product was last offered at the strikethrough price on
03-31-2026

$ 5.58 USD

Add to Wish List

Qty

$ 5.58 USD

Add to Wish List

This is a standard replacement valve that is used if you have bent a valve due to timing component failure or any other mechanical failure

Intake Camshaft Timing Gear

T#:32549471

Part#: 11367540347

Special Order: No Guaranteed ETA

$ 100.99

This product was last offered at the strikethrough price on
03-31-2026

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

The camshaft adjustment unit, also referred to as an engine timing sprocket or camshaft sprocket, is part of your BMW's VANOS system which controls the position of the camshaft and valves. If your sprocket has failed, it will be unable to properly adjust the camshaft timing. This can result in poor or delayed performance and efficiency which negatively affects driveability and engine power. This OEM Kolbenschmidt sprocket is the perfect option to restore proper timing functionality without the high BMW price tag.

Show More Show Less

Meyle Crankshaft Pulse Sensor - BMW EXX, FXX

T#:52762518

Part#: 314810014

Special Order: No Guaranteed ETA

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Revitalize your vehicle’s performance and reliability with the MEYLE Crankshaft Pulse Sensor.

OEM Kolbenschmidt Adjustment Unit - Inlet Camshaft - BMW N52 N55 S55 ...

T#:31092509

Part#: 11367583207

Special Order: No Guaranteed ETA

$ 103.99

This product was last offered at the strikethrough price on
03-31-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the intake camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

TRW Engine Exhaust Valve - BMW N20 N55

T#:31092512

Part#: 11347598273

Special Order: No Guaranteed ETA

$ 10.78

This product was last offered at the strikethrough price on
03-31-2026

$ 9.89 USD

Add to Wish List

Qty

$ 9.89 USD

Add to Wish List

This is a standard replacement valve that is used if you have bent a valve due to timing component failure or any other mechanical failure

Engine Mount - Right

T#:594852

Part#: 22116773744

Special Order: No Guaranteed ETA

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Bremmen Oil Cooler - BMW N52 N20 N55

T#:4455968

Part#: 11427525333

In Stock

Sale - Save 16% $ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.94 USD

Add to Wish List

Qty

Sale - Save 16%

$ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.94 USD

Add to Wish List

Also referred to as a heat exchanger, this radiator type component keeps your oil temps low.

02 SENSOR BUNG (WELD-ON TYPE) 304 STAINLESS STEEL (M18x1.5mm) ...

T#:47439371

Part#: 02SB1815

Ships on Apr 1, 2027

Sale - Save 39% $ 3.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2.44 USD

Add to Wish List

Qty

Sale - Save 39%

$ 3.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2.44 USD

Add to Wish List

Easily add an oxygen sensor to your custom exhaust setup with this universal O2 sensor bung. Designed for simple weld-on installation, it allows you to place your sensor exactly where you need it—perfect for custom builds, exhaust modifications, or performance tuning projects.

Features:

CNC-cut from T304 Stainless Steel for corrosion resistance
Threaded for M18x1.5mm RH oxygen sensors

Show More Show Less

Genuine BMW M Performance Performance Air Duct Kit - E82 135i, E88 13...

For vehicles with production date up to 03/2012 with performance aerodynamics package

T#:12815

Part#: 51740442875

Back Ordered

4% off MSRP $ 372.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 357.99 USD

Add to Wish List

Qty

4% off MSRP

$ 372.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 357.99 USD

Add to Wish List

Genuine BMW Bmw Performance Cold-Air Package 135I -
This item fits the following BMW Chassis:
E82

Engine Block Primer - (NO LONGER AVAILABLE)

This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi

T#:577415

Part#: 83197515683KTKT

No longer available

Meyle BMW Ignition Coil

T#:40342863

Part#: 12137559842

Special Order: No Guaranteed ETA

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

The Meyle ignition coil (part number 12137559842) is a precision-engineered replacement for BMW factory units, delivering dependable ignition performance across a range of BMW models. Built to meet or surpass OEM standards, it ensures steady spark output and optimized combustion efficiency. With a durable, high-quality design, this coil is built to handle the demands of everyday driving as well as more intensive performance needs.

Show More Show Less

CP-Carrillo Forged Piston Set - N54

Upgrade Your N54's Pistons to CP-Carrillo's Forged Piston Set!

T#:25473981

Part#: CP-FPS-N54-84

Back Ordered

$ 2,292.99

This product was last offered at the strikethrough price on
08-12-2026

Starting at $ 2,256.98 USD

Add to Wish List

Starting at $ 2,256.98 USD

Add to Wish List

CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW N54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for N54 engines, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.

Show More Show Less

5mm Single Groove Valve Keeper - Priced Each

T#:21604312

Part#: KPR-5.0-7S

Back Ordered

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

Cometic Gasket For N54 0.040"

T#:31522941

Part#: C15257-040

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

OEM Rein Valve Cover Kit - BMW N55 3.0L

For vehicles with Blow-by Heater option (S4NEA)

T#:45757477

Part#: 11127570292K

In Stock at Vendor

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

This Rein valve cover kit includes a new valve cover assembly, oil cap, and a vent hose. Over time, valve cover gaskets can fail, and plastic valve covers can warp and become brittle, leading to cracks. If your valve cover has cracked or warped, replace it early to prevent leaks and further valvetrain damage.

Show More Show Less

Rear Crankshaft Seal

For vehicles with production date up to 01/2009

T#:13430825

Part#: 11117584398

Back Ordered

$ 16.31 USD

Add to Wish List

Qty

$ 16.31 USD

Add to Wish List

90x110x12mm - usually replaced when servicing the timing chains The front seal or crankshaft seal is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the pulley surfaces. Replace yours and keep your oil in your engine. The perfect time to replace this seal is when you are doing a timing replacement. You already have everything apart, so you might as well add this piece even if it hasn't failed yet as a bit of preventative maintenance.

Show More Show Less

Vargas N55 GC Turbocharger Upgrade - PWG Wastegate

For vehicles with a Pneumatic Wastegate only!

T#:13891854

Part#: VTT-N55-GC-PWG

Back Ordered

$ 2,761.99 USD

Add to Wish List

Qty

$ 2,761.99 USD

Add to Wish List

Ready to take your N55 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting N55 “GC” and “GC+” turbocharger upgrade. We start by keeping the great design elements of the factory N55 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious N55 power made easy; GCs are a drop-in turbocharger upgrade that supports over 600-700 WHP while maintaining factory-like spool and all factory connections including oil, water, downpipe, and charge pipe.

Show More Show Less

18" Flexible Magnetic Pickup Tool

T#:641342

Part#: 1711D

Back Ordered

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Genuine BMW Remanufactured 180 Amp Alternator - E82/88 E9X E60/61 N54...

T#:373810

Part#: 12317558220KT

Back Ordered

$ 1,203.99 USD

Add to Wish List

Qty

$ 1,203.99 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence. Includes a $432.00 core charge to be refunded after we receive your refundable core.

Show More Show Less

Crankshaft Position Sensor

T#:35863159

Part#: 13627525015

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Having a crank but no starting issue? This sensor is often the culprit

FAE Oil Pressure Switch - M12x1.5

T#:374049

Part#: 12617568480

Back Ordered

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

N54B30 32cc Platinum Series Dish Extreme Duty Piston Set - 84.5mm Bor...

T#:17073602

Part#: 646005CE-6

Back Ordered

8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

BMW Adjustment Motor

We Price Match - Give Us A Call or Chat!

T#:38419069

Part#: 11377599021

Special Order: No Guaranteed ETA

$ 552.99 USD

Add to Wish List

Qty

$ 552.99 USD

Add to Wish List

Genuine BMW Actuator - This item fits the following BMW Chassis: E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83 Fits BMW Engines including: N20,N26,N55,S55 Genuine BMW Actuator - This item fits the following BMW Chassis: E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83 Fits BMW Engines including: N20,N26,N55,S55

Show More Show Less

FAE Oil Pressure Switch - M12x1.5

T#:377029

Part#: 12612367061

Back Ordered

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

T#:44258354

Part#: BMW-N54PORT-750

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Ajusa Intake Manifold Gasket - BMW N52 N54 N55 N63

T#:45963169

Part#: 24030200

Back Ordered

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This intake gasket goes between the cylinder head and the intake runners and should be replaced anytime the intake manifold is removed from the engine.

Cometic MLX Head Gasket - 85mm Bore - .044in - N54B30

T#:26738401

Part#: C15257-044

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. Cometic's MLX Gasket (Multi-Layer-Xtreme) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal. Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface.

Show More Show Less

ARP Head Stud Kit BMW S55 Custom Age 625+

N55 Engines it is a MUST to drill and tap!

T#:41458801

Part#: ARP-HSK-S55-CA

Back Ordered

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Upgrade your S55 with the ARP Head Stud Kit BMW S55 Custom Age 625+ and drive with confidence under pressure.

N55 Cometic Head Gasket - 0.060"

T#:31522947

Part#: C15476-060

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

T#:590134

Part#: E90BUCKETSTKDS

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

BMW Connecting Rods - 145mm - N54B30 (Set Of 6)

T#:23714964

Part#: SCR7567-6

Back Ordered

$ 1,850.00 USD

Add to Wish List

Qty

$ 1,850.00 USD

Add to Wish List

Starter Mounting Hardware

T#:594380

Part#: 12410392577

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Modern starter and water pump fasteners are torque-to-yield, meaning they stretch and can only be safely used once. Replace your hardware for peace of mind.

JE Pistons BMW N55 Single

T#:33846578

Part#: 338096S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B

JE Pistons BMW N55B30 Piston - 3.307 in Bore

Transform your BMW N55B30 engine with the high-performance JE Pistons Piston, engineered for those who demand power, efficiency, and reliability. With a precise 3.307-inch bore size, this piston is designed to enhance combustion dynamics, resulting in improved horsepower and torque. Crafted from premium forged aluminum, the JE piston is built to endure the rigors of high-performance driving, making it an ideal choice for both track enthusiasts and everyday drivers.

Key Features:

Optimized Design: Each piston is meticulously crafted to ensure a perfect fit for the N55B30 engine, maximizing combustion efficiency and overall engine performance.
3.307-Inch Bore: This specific bore size enhances airflow and combustion efficiency, enabling your engine to unleash its full power potential while maintaining reliability.
Durable Forged Construction: Made from high-quality forged aluminum, this piston offers exceptional strength and lightweight properties, making it capable of withstanding extreme conditions found in performance applications.
Enhanced Combustion Characteristics: The uniquely designed piston crown promotes efficient fuel burn, reducing the chances of detonation and improving power delivery across the RPM range.
Trusted Performance: JE Pistons are renowned in the automotive community for their durability and reliability, making them a preferred choice for high-performance builds.

Applications:

Fits BMW N55B30 Engines – Perfect for high-performance applications, whether on the track or on the street.
Ideal for builders looking to enhance their engine’s capabilities, ensuring maximum power and efficiency.

Technical Specifications:

Bore Size: 3.307 inches, specifically designed for optimal performance in the N55B30 engine.
Material: Premium forged aluminum for lightweight and strength.

Show More Show Less

JE Pistons BMW N54B30 Single Piston

T#:33846580

Part#: 367878S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B

JE Pistons BMW N54B30 Ultra Series Piston - 3.327in Bore (9.5:1 Compression Ratio)

Enhance your BMW N54B30 engine’s performance with the JE Pistons Ultra Series Piston, engineered for those who seek uncompromising power and precision. Featuring a 3.327-inch bore and a 9.5:1 compression ratio, this piston is specifically designed to optimize combustion efficiency and maximize horsepower, making it an excellent choice for both street enthusiasts and competitive racers.

Key Features:

Precision 3.327-Inch Bore: Tailored for the N54B30 platform, this bore size enhances airflow and combustion, translating to significant gains in horsepower and torque while maintaining engine reliability.
Balanced 9.5:1 Compression Ratio: This ideal compression ratio allows for responsive throttle performance, making it suitable for various setups, including turbocharged applications where power and efficiency are paramount.
Ultra Series Forged Construction: Crafted from premium forged aluminum, this piston provides a robust combination of strength and lightweight characteristics, ensuring durability under high-stress conditions.
Advanced Combustion Chamber Design: The uniquely shaped piston crown promotes efficient fuel atomization and burn, enhancing overall engine performance and reducing the risk of pre-ignition or detonation.
Engineered for Performance: JE Pistons are known for their commitment to quality, ensuring that each piston meets stringent performance standards for reliability and longevity.

Applications:

Designed for BMW N54B30 Engines – Ideal for high-performance builds, whether for spirited street driving or competitive motorsport.
Perfect for enthusiasts looking to boost power in turbocharged or naturally aspirated configurations.

Technical Specifications:

Bore Size: 3.327 inches, ensuring optimal fit and performance for the N54B30 engine.
Compression Ratio: 9.5:1, balancing power output with engine safety.
Material: High-strength forged aluminum, offering superior durability and performance.

Show More Show Less

Meyle Outdoor Temperature Sensor / Probe

We Price Match - Give Us A Call or Chat!

T#:579266

Part#: 3009190001

Special Order: No Guaranteed ETA

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Common fix for incorrect OBC temperature readings

Engine Valve Stem Seal Set

T#:14949062

Part#: 11340034068

Back Ordered

$ 42.99

This product was last offered at the strikethrough price on
05-08-2026

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Replace your old valve stem seals with these new ones!

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

T#:42133542

Part#: BMW-N55-PRM-950

Back Ordered

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

JE Piston BMW N54B30 3.0T 85MM 9.5:1 KIT

T#:33612912

Part#: 361360

Back Ordered

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

N54B30 3.0T 85MM 9.5:1 JE Pistons for the N54 engine are built for high performance, utilizing forged aluminum for maximum strength and reliability under high boost conditions. Designed specifically for BMW’s twin-turbo 3.0L inline-six, these pistons offer optimized combustion efficiency with precision-engineered domes and valve reliefs. Their lightweight design reduces engine stress, enhancing throttle response and power output. With customizable compression ratios and coatings, JE Pistons are perfect for tuning and high-performance applications, offering durability and performance for both street and track use.

Show More Show Less

Carrillo BMW N54B30 Pro-H 3/8 CARR Bolt Connecting Rods (Set Of 6) ...

T#:1887215

Part#: 5709B6S-06

Back Ordered

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

0.822" pin width, 22mm pin size

OEM Rein Oil Filter Cap - BMW N20 N52 N54 N55

T#:46134810

Part#: CPL0054

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Over time, has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the top of the cap, making removal harder each time. Replace your old cap and seal to ensure your engine is leak-free. We recommend pairing this with the Schwaben Oil Filter Cap Tool (T#371924) to make installation and removal easier.

Show More Show Less

BMW N55 JE Piston ULTRA SERIES

T#:33612896

Part#: 367880

Back Ordered

$ 1,674.99 USD

Add to Wish List

Qty

$ 1,674.99 USD

Add to Wish List

JE Pistons for the N55 engine are high-performance forged pistons designed for BMW’s single-turbo 3.0L inline-six. Built for strength and durability under high boost, they feature optimized crown shapes and valve reliefs for better combustion. The lightweight design reduces rotational mass, improving throttle response and efficiency. With options for compression ratios and coatings, these pistons are perfect for tuning and motorsport use, delivering reliable performance on the street or track.

Show More Show Less

BMW N55B30 JE Pistons

T#:33612902

Part#: 338097

Back Ordered

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F2...

For Vehicles with a 210A alternator & a Production Date from 03/2012

T#:42167226

Part#: EA0141

Back Ordered

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Whether you're replacing a failing alternator pulley or performing preventive maintenance, this Alternator Pulley ensures your BMW continues to perform with factory precision and reliability.

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2006-2007 models only

T#:26705005

Part#: 090766ECS09KT2

Back Ordered

Sale - Save 8% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD

Add to Wish List

Qty

Sale - Save 8%

$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2008+ models only

T#:26705034

Part#: 090743ECS09KT2

Back Ordered

Sale - Save 8% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD

Add to Wish List

Qty

Sale - Save 8%

$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Vargas Turbocharger Replacement - BMW E8X, E9X RHD N54

For Right Hand Drive models only

T#:52305491

Part#: STK1NWRHBK

Back Ordered

$ 1,889.99 USD

Add to Wish List

Qty

$ 1,889.99 USD

Add to Wish List

The Vargas Replacement Kit is the definitive solution for BMW owners looking to replace failing turbos while also addressing their inherent weaknesses.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Key Features:

Applications:

Technical Specifications:

Key Features:

Applications:

Technical Specifications:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results