If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Facet thermostat
• Graf water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs: 
2009+ E90 BMW 335d 
2009+ E70 BMW X5 xDrive35d

BMW & MINI Universal Oil Cooler - 10 Row is a versatile cooling solution designed to enhance the performance and reliability of BMW and MINI vehicles. This high-quality oil cooler provides efficient cooling for the engine oil, ensuring optimal operating temperatures and extending the life of vital engine components.

Crafted with precision engineering and durable materials, the BMW & MINI Universal Oil Cooler - 10 Row is compatible with a wide range of BMW and MINI models, offering versatility and ease of installation. It effectively dissipates heat from the engine oil, reducing the risk of overheating and engine damage.

• Enhances performance and reliability of BMW and MINI vehicles
• Efficient cooling for engine oil, ensuring optimal operating temperatures
• Extends the life of vital engine components
• Compatible with a wide range of BMW and MINI models
• Versatile and easy to install
• Crafted with precision engineering and durable materials

Investing in the BMW & MINI Universal Oil Cooler - 10 Row is a smart choice for BMW and MINI owners looking to improve their vehicle's performance and longevity.

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Thermostat
• Water pump
• Coolant

This item fits the following BMW Engines: 
N63,N63N,S63,N62N 

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i

For BMW owners seeking enhanced airflow or tighter engine compartment clearance, Turner Motorsport presents a Universal Fan. Ideal for applications like aftermarket turbo setups, this fan ensures optimal cooling performance. Please note that this fan is universal and may require modification to fit your specific application. Crafted in Italy, this fan boasts dimensions of 16.30in x 15.75in x 3.47in and provides an airflow of 2024 CFM.

• Enhanced airflow for improved engine cooling
• Ideal for applications with tight tolerances, such as aftermarket turbo setups
• Universal design allows for versatile installation
• Crafted in Italy for quality assurance
• Compact size with powerful airflow capacity

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Genuine BMW Thermostat
• Genuine BMW Electric Water Pump
• Genuine BMW coolant
• Mounting hardware required for both the thermostat and water pump

BMW Blue Engine Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Constructed from high-quality billet aluminum, this cap replaces the flimsy plastic factory cap, offering improved durability and a sleek, high-performance aesthetic.

Designed with precision, this coolant reservoir cap incorporates the OEM pressure relief function to maintain proper cooling system operation. Unlike inferior stick-on covers that may loosen over time, this cap is a complete replacement, ensuring a secure, leak-free fit. The blue anodized finish provides superior corrosion resistance, making it a reliable upgrade for daily drivers and track enthusiasts alike.

• OEM pressure relief function – Ensures proper cooling system performance and safety
• Billet aluminum construction – Provides enhanced durability and strength over factory plastic caps
• Direct-fit replacement – Fully replaces the stock cap for a precise, secure fit
• Blue anodized finish – Resists corrosion, heat, and wear for long-lasting performance
• Motorsport-inspired design – Adds a sleek, professional look to the engine bay
• Built for longevity – Engineered to withstand extreme temperatures and coolant exposure

Upgrade your BMW’s cooling system with the BMW Blue Engine Coolant Reservoir Cap, designed for superior reliability and style.