BMW Drivetrain Parts for BMW X Series E70 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

PPE - Corporate Logo
T#:1002349
Part#: 228053410
Back Ordered
$ 314.99 USD
Free Shipping
$ 314.99 USD
Free Shipping
When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
Show More Show Less
PPE - Corporate Logo
T#:1002348
Part#: 228053400
Back Ordered
$ 296.99 USD
Free Shipping
$ 296.99 USD
Free Shipping
When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241340
Part#: 24118612901T3KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 484.99 USD
Free Shipping
$ 484.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

CTA Tools - Corporate Logo
T#:5028777
Part#: 7073
In Stock
$ 28.57 USD
Free Shipping on orders $49 and up
Great for removing & filling Brake Fluid, Anti-Freeze, Gear Oil plus Power Steering Fluid & more

Redline - Corporate Logo
T#:394647
Part#: 80402
In Stock
$ 17.99 USD
Free Shipping on orders $49 and up

Red Line CV-2 Grease

Experience unparalleled performance with Red Line CV-2 Grease, expertly crafted to endure extreme temperatures and pressures found in high-performance wheel bearings and CV-joints. This premium grease surpasses both conventional and synthetic options with its exceptional high-temperature stability, superior extreme-pressure protection, and water resistance. Operating effectively in temperatures spanning from -100°F to 500°F, it offers outstanding oxidation and corrosion resistance, minimal evaporation and oil separation, and has minimal impact on rubber seals. Expect a remarkable 200% to 800% increase in bearing life due to the exceptional extreme-pressure performance and synthetic oil fluidity. Its red moly compound outshines black moly disulfide lubricants, ensuring superior lubrication.

Red Line CV-2 Grease finds application not only in automotive settings but also in industrial environments. It excels in high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and other scenarios prone to fretting wear and corrosion. Its consistency and extreme-pressure performance endure high-temperature and high-shear conditions, extending the performance life of lubricated components. Despite darkening after high-temperature use, its efficacy remains unaffected. While compatible with some petroleum-based greases, it's recommended to clean out old grease thoroughly for optimal lubrication performance and to avoid grease incompatibility.

Product features:

  • Outperforms conventional or synthetic greases and lubes
  • Endures extreme temperatures and pressures in various automotive components
  • Excellent high-temperature stability, extreme-pressure protection, and water resistance
  • Operates within temperatures ranging from -100°F to 500°F
  • Resistant to oxidation and corrosion, with minimal evaporation and oil separation affecting rubber seals
  • Contains organic moly for chassis lubrication and high temp/high-speed industrial equipment
  • Synthetic fluidity increases bearing life up to 200%
  • Darkening after high-temp use doesn't impact performance
Show More Show Less
Pentosin - Corporate Logo
T#:45997487
Part#: 1058210
Ships on Sep 21, 2026
$ 113.99

This product was last offered at the strikethrough price on
04-28-2026

$ 109.99 USD
Free Shipping on orders $49 and up
$ 109.99 USD
Free Shipping on orders $49 and up

URO - Corporate Logo
T#:28171567
Part#: 24117571235
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up

Prevent oil leaks that can stain your garage and driveway while also ensuring your transmission stays properly lubricated. Replace your leaking pan gasket as part of routine transmission fluid and filter changes to enhance shift quality and prolong the transmission's lifespan.

Key Features:

Guaranteed to fit your vehicle Replaces worn-out original automatic transmission pan gaskets to prevent ATF leaks and maintain transmission performance OE-style gasket profile and material ensure a secure seal between the pan and transmission housing High-quality gasket material withstands high transmission temperatures and corrosive ATF conditions

Show More Show Less
URO Premium - Corporate Logo
T#:593140
Part#: 24152333903PRM
In Stock
$ 124.11

This product was last offered at the strikethrough price on
08-12-2026

$ 124.10 USD
Free Shipping
$ 124.10 USD
Free Shipping
Upgrade your transmission pan to prevent cracks and warping, which can lead to transmission fluid loss and eventual transmission failure.

Packaged by Turner - Corporate Logo
T#:1241337
Part#: 24118612901T1KT
Back Ordered
Sale - Save 1% $ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Sale - Save 1%
$ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Adapter Set For Transmission Fluid Pump
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:29101662
Part#: 9999901001
Back Ordered
$ 91.99 USD
Free Shipping on orders $49 and up
  • The Meyle Adapter Set for the Transmission Fluid Filler Pump is designed for a wide range of Euro and domestic vehicles. This set allows you to maximize the utility of Meyle's premium-built pump across various makes in your driveway. Each adapter easily attaches to the filler's coupler, ensuring quick and seamless transitions between adapters. The set comes in a blow-molded case, providing convenient and mess-free storage.


    Please note: The Meyle transmission filler tool is sold separately. The filler tool part number is T29068522.


    Includes:

    • BMW, Volvo Adapter (5/16" -24 UNF)
    • VW, Audi, Porsche Adapter (M10 x 1.00)
    • VW Adapter (Alternate)
    • VW, BMW Adapter (Alternate)
    • Nissan, Honda, BMW Adapter (Alternate)
    • Audi, VW, Seat, Skoda Adapter (M24 x 1.50)
    • Audi Adapter (M22 x 1.50)
    • Mercedes-Benz Adapter (M12 x 1.50)
    • Toyota, Lexus Adapter (M18 x 1.50)
    • Ford, Mazda Adapter (1/8" NPT)

  • WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

  • Show More Show Less
    ZF - Corporate Logo
    T#:362701
    Part#: 24117520713
    Back Ordered
    $ 6.99 USD
    Free Shipping on orders $49 and up
    Located in the center of the transmission pan


    PPE - Corporate Logo
    T#:1002350
    Part#: 228053420
    Back Ordered
    $ 314.99 USD
    Free Shipping
    $ 314.99 USD
    Free Shipping
    When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241338
    Part#: 24118612901T2KT
    Back Ordered
    $ 490.99

    This product was last offered at the strikethrough price on
    08-04-2026

    $ 484.99 USD
    Free Shipping
    $ 484.99 USD
    Free Shipping
    Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
    Show More Show Less
    Rein - Corporate Logo
    T#:4524502
    Part#: 27102449709
    Ships in 3 Business Days
    $ 458.99 USD
    Free Shipping
    $ 458.99 USD
    Free Shipping
    Drive actuator for the transfer case on E53 X5 and E83 X3 SAVs, located on back side of transfer case.

    URO - Corporate Logo
    T#:380525
    Part#: 24347588725
    Ships in 1 Business Day
    $ 17.23 USD
    Free Shipping on orders $49 and up
    Connects Mechatronik control assembly to transmission

    FAG - Corporate Logo
    T#:42200959
    Part#: 102304
    Back Ordered
    $ 301.99 USD
    $ 301.99 USD
    Wheel bearings can need to be replaced for a number of reasons, the most common being normal wear. If there is a loud humming, growling, or metal-to-metal noise while driving, it's likely that the bearing has failed. A simple way to check your bearing is to lift the wheel off the ground and try to move the tire back and forth by pushing the top and bottom of the tire in. If there is play, this commonly means the wheel bearing is worn out or has failed completely. The wheel hubs and bearings are already pressed together, simply bolt this new hub assembly to your wheel carrier.
    Show More Show Less
    Schwaben - Corporate Logo
    T#:366897
    Part#: 011362SCH01AKT1
    In Stock
    Sale - Save 2% $ 587.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 577.55 USD
    Sale - Save 2%
    $ 587.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 577.55 USD

     A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

    • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
    • Wide track front wheels help provide chassis torsion control and durability.
    • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
    • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
    • Side mounted handles for carrying and easy positioning.
    • Overload and bypass safety valve prevents jack overload and over extension.
    • Two piece quick release padded handle for storage or transport.
    • Dual piston's for 5 pump full extension

    Details:

    • Jack Capacity 2 Ton
    • Max Lift Height 20"
    • Low Height 3.25"
    • Chassis Length 26.5"
    • Overall Width 13"
    • Saddle Diameter 4.5"
    • Handle Lenght 50"
    • Shipping Weight 50 lbs

    Schwaben 12" wheel Stands:

    These stands are made from special EPS foam with an anti-skid coating.

    Won't scratch or mark your floors!

    Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

    Works on virtually any surface, including sand!

    Will not scoot, slip or slide, no matter the surface.

    Specs:

    12" tall,15.75" long,12" wide.

    Works on wheel diameters from 25 to 30 inches.

    Show More Show Less

    URO Premium - Corporate Logo
    T#:587705
    Part#: 24152333903
    Back Ordered
    $ 147.99 USD
    Free Shipping
    $ 147.99 USD
    Free Shipping
    With gasket and integrated filter
    Pentosin - Corporate Logo
    T#:46134786
    Part#: 1058211
    Ships on Sep 21, 2026
    $ 139.99 USD
    Free Shipping on orders $49 and up
    Pentosin ATF9 is specially developed with reduced viscosity to optimize the performance of the latest generation 8 and 9-speed ZF automatic transmissions. Pentosin ATF 9 has been developed to deliver outstanding friction control to ensure excellent shifting performance.
    Show More Show Less

    URO - Corporate Logo
    T#:37858381
    Part#: 24147588896
    Ships in 1 Business Day
    $ 12.99 USD
    Free Shipping on orders $49 and up

    URO AT Plug Sealing Sleeve - BMW Multiple Applications

    URO AT Plug Sealing Sleeve - BMW Multiple Applications is a high-quality replacement designed to prevent automatic transmission fluid leaks and restore optimal transmission performance. This direct-fit sealing sleeve replaces worn or cracked originals, ensuring a secure and long-lasting seal.

    • Direct-fit OE replacement restores factory sealing integrity
    • Prevents ATF leakage that can lead to transmission performance issues
    • OE-style o-ring profile and durometer ensure proper compression and fit
    • Manufactured from high-quality materials to resist extreme heat and ATF corrosion
    • Enhances transmission reliability and longevity
    • Backed by a 24-month unlimited mileage warranty

    Compatible with multiple BMW applications, this URO AT Plug Sealing Sleeve helps maintain smooth shifting and overall transmission efficiency.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:41289766
    Part#: 31521428678TKT
    Back Ordered
    $ 52.99

    This product was last offered at the strikethrough price on
    07-23-2026

    $ 50.99 USD
    Free Shipping on orders $49 and up
    $ 50.99 USD
    Free Shipping on orders $49 and up
    This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.
    FAG - Corporate Logo
    T#:14188765
    Part#: 101780
    Ships in 7 Business Days
    $ 143.99 USD
    $ 143.99 USD
    Wheel bearings can need to be replaced for a number of reasons, the most common being normal wear. If the wheel turns with a gritty feel or there is a loud metal-to-metal noise while driving, the bearing has likely failed. A simple way to check your bearing is to lift the wheel off the ground and try to move the tire back and forth, by pushing the top and bottom of the tire in. If there is play, this commonly means the wheel bearing has failed. Changing bearings in pairs is always a good idea; when one side fails, it's not uncommon for the other side to follow suit.
    Show More Show Less
    Schaeffler - Corporate Logo
    T#:26305050
    Part#: 31226867808
    Back Ordered
    $ 199.99

    This product was last offered at the strikethrough price on
    05-08-2026

    $ 193.99 USD
    Free Shipping on orders $49 and up
    $ 193.99 USD
    Free Shipping on orders $49 and up

    Is your BMW experiencing excessive steering wheel vibration, noticeable humming at high speeds, or strange noises while turning? These symptoms could indicate a failing wheel bearing.

    Upgrade your BMW's wheel bearing with this convenient hub assembly. The wheel bearing comes pre-pressed into the hub assembly, making the replacement process hassle-free without the need for additional tools.

    • Simplified Installation: The pre-pressed wheel bearing eliminates the need for additional tools or equipment during installation.
    • Compatibility: Designed to fit both the left and right sides of your BMW, offering versatility and ease of use.
    • Reliable Performance: Ensure smooth and quiet operation with a high-quality hub assembly that addresses failing wheel bearings effectively.

    Upgrade your BMW's wheel bearings with this hub assembly for a smoother and safer driving experience.

    Show More Show Less


    ZF - Corporate Logo
    T#:594196
    Part#: 24007571248
    Back Ordered
    $ 2,845.93 USD
    Free Shipping on orders $49 and up
    Remanufactured Mechatronics with core included from ZF
    Rein - Corporate Logo
    T#:45997532
    Part#: TSK0018
    Back Ordered
    $ 191.99 USD
    Free Shipping on orders $49 and up
    $ 191.99 USD
    Free Shipping on orders $49 and up
    Rein OE Quality Automatic Transmission Service kits address the short-lived valve body sealing sleeves and adaptor in the ZF 6HP transmissions. This kit includes the necessary direct-fitting sealing hardware to conveniently service the shrunken valve body sealing sleeves during the recommended fluid and filter change interval of 62,000 miles / 8 years at the latest. The ZF 6HP26Z series transmission is engineered with extreme durability and powerful in mind so long as it is serviced on time to allow the valve body to maintain proper fluid pressure. The slightest drop in valve body fluid pressure in this unit leads to premature transmission bushing and or clutch wear along with contamination and overheating of the fluid. Rein recommends the OE or Pentosin ATF-1 synthetic automatic transmission fluid for this repair.
    Show More Show Less