The factory plastic gears in BMW S65 and S85 throttle body actuators are notorious for premature wear due to mechanical stress, engine vibration, and heat cycling. Over time, this wear leads to excessive play, throttle response issues, and eventual failure. This can cause DME fault codes, limp mode, and DSC malfunctions. While replacing both throttle actuators is costly, even new OEM units will eventually suffer the same fate.

Thankfully, ECS has developed the ultimate solution for E9X M3, E60 M5, and E63/64 M6 owners! These Upgraded Throttle Body Actuator Gears are constructed of Teflon-reinforced nylon, significantly reducing friction and gear tooth wear for long-term reliability. Each gear comes pre-installed on a 4140 steel shaft, strengthening the assembly and ensuring a hassle-free installation. With this cost-effective and durable fix, you can eliminate throttle actuator failures for good!

Features & Benefits:

Upgraded Teflon-reinforced nylon gears – Superior to factory plastic-on-plastic gears, reducing wear and extending lifespan. Pre-installed 4140 steel shafts – Increases durability and simplifies installation. Prevents common actuator failures – Resolves worn gear issues that cause CELs, limp mode, and DSC/DME errors. Cost-effective alternative to full actuator replacement – Saves hundreds in parts and labor. Factory-like fitment – Engineered for precise compatibility and long-term reliability. Built to withstand heat and mechanical stress – Ensures consistent throttle performance and extended service life.

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

BMW N54 3.0L Blow Off Valve For BMW N54 – Q 50mm BOV – 10 PSI Spring Q.10 is an essential upgrade for enhancing the performance and reliability of the BMW N54 engine. Designed to handle higher boost levels, this blow-off valve (BOV) offers superior venting capabilities, ensuring optimal engine performance and longevity.

• High Performance: The 50mm Q BOV is engineered to manage higher boost pressures, providing reliable venting and preventing compressor surge.
• Durable Construction: Crafted from high-quality materials to withstand the stresses of high boost and extreme conditions.
• 10 PSI Spring: Features a 10 PSI spring for precise tuning and improved responsiveness.
• Enhanced Engine Protection: Helps to prevent compressor surge and extends the lifespan of the turbocharger and engine components.
• Easy Installation: Designed for straightforward installation with no extensive modifications required.

Turner Motorsport’s blow-off valve is the perfect choice for BMW enthusiasts seeking improved performance and reliability from their N54 engine setup.

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes.

If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage.

Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold.

BMW E60 E61 N52 Cold Air Intake System aFe Magnum FORCE Stage-2 Pro 5R is designed to significantly enhance the performance of your BMW by replacing the restrictive factory air box. This intake system features a 1.6mm powder-coated steel heat shield and a heat-resistant molded intake tube, which is trim-sealed to prevent hot engine air from entering. The kit includes a custom aFe brand Pro 5R cotton filter, known for its high airflow and exceptional filtration.

• Enhanced Airflow: The Pro 5R filter media, lightly oiled gauze, maximizes airflow to the engine, improving horsepower and torque.
• Improved Performance: Removal of the restrictive factory air box increases acceleration and throttle response.
• Durable Construction: The 1.6mm powder-coated steel heat shield and molded intake tube provide long-lasting durability and protection.
• Custom Fit: Designed specifically for the BMW E60 525i and 530i models from 2006-2007.

This intake system is a high-performance upgrade that enhances engine efficiency and driving experience. For installation instructions, please refer to the provided link.

A faulty actuator will prevent operation of the throttle body and significantly affect the performance of the engine. Replace your faulty actuator with a high quality OEM VDO actuator to restore performance and engine function.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs: 
2006-2010 E60 BMW M5 
2006-2010 E63 BMW M6

Ensure smooth idling for your BMW's M50, M52, or M54 engine with the Turner Motorsport Genuine Idle Control Valve. This essential component, located in the intake system, plays a crucial role in regulating the engine's idle speed and air intake.

• Genuine BMW part ensures quality and compatibility
• Prevents idle issues and irregular engine behavior
• Optimizes engine performance and fuel efficiency
• Easy replacement for hassle-free maintenance

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy