BMW Drivetrain Parts for BMW E60 M5 S85 5.0L

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Febi and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• OEM Febi Engine Mount (Left and Right Sides)
• Genuine BMW Transmission Mount (x2)
• New Installation Hardware

The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.

For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.

WHY UPGRADE?

Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.

Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.

FEATURES & BENEFITS

Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN

6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:

Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

BMW E9X M3/E6X M5/M6 Polyurethane Transmission Mounts offer superior performance for both street and track use with their 95A durometer rating. These mounts are engineered by Revshift to provide maximum durability and reliability.

• High-Performance Material: Made from high-grade polyurethane in the U.S.A., ensuring longevity and resilience.
• Durable Construction: CNC machined 6061-T6 billet aluminum flanged ends are embedded deep into the polyurethane to prevent separation under extreme loads.
• Easy Installation: Features removable class 14.9 threaded studs with a hex wrench for simple and convenient installation.
• Versatile Use: Ideal for street driving and track applications, combining performance with comfort.
• Precision Engineering: Manufactured and tested in-house at Revshift’s Detroit facility, utilizing advanced machining technologies and quality control processes.

Revshift Performance Engineering is renowned for its commitment to quality and performance, making these transmission mounts a reliable choice for enhancing vehicle handling.

Red Line CV-2 Grease

Experience unparalleled performance with Red Line CV-2 Grease, expertly crafted to endure extreme temperatures and pressures found in high-performance wheel bearings and CV-joints. This premium grease surpasses both conventional and synthetic options with its exceptional high-temperature stability, superior extreme-pressure protection, and water resistance. Operating effectively in temperatures spanning from -100°F to 500°F, it offers outstanding oxidation and corrosion resistance, minimal evaporation and oil separation, and has minimal impact on rubber seals. Expect a remarkable 200% to 800% increase in bearing life due to the exceptional extreme-pressure performance and synthetic oil fluidity. Its red moly compound outshines black moly disulfide lubricants, ensuring superior lubrication.

Red Line CV-2 Grease finds application not only in automotive settings but also in industrial environments. It excels in high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and other scenarios prone to fretting wear and corrosion. Its consistency and extreme-pressure performance endure high-temperature and high-shear conditions, extending the performance life of lubricated components. Despite darkening after high-temperature use, its efficacy remains unaffected. While compatible with some petroleum-based greases, it's recommended to clean out old grease thoroughly for optimal lubrication performance and to avoid grease incompatibility.

Product features:

• Outperforms conventional or synthetic greases and lubes
• Endures extreme temperatures and pressures in various automotive components
• Excellent high-temperature stability, extreme-pressure protection, and water resistance
• Operates within temperatures ranging from -100°F to 500°F
• Resistant to oxidation and corrosion, with minimal evaporation and oil separation affecting rubber seals
• Contains organic moly for chassis lubrication and high temp/high-speed industrial equipment
• Synthetic fluidity increases bearing life up to 200%
• Darkening after high-temp use doesn't impact performance

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.
• Dual piston's for 5 pump full extension

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

This clutch kit from Valeo includes a new friction disc, pressure plate, and throwout/release bearing. Valeo is an OE BMW supplier - save money and buy quality parts by buying those parts in a different box!

For vehicles with an SMG transmission.