BMW Wheels - Genuine & Performance for BMW E60 M5 S85 5.0L

The Style 95 wheel is very popular among the stance crowd and for very good reasons - it looks great with a deep concave wheel face, clean and handsome design, and optimal sizing for a number for 5/6/7-series cars. These wheels were originally used on the E65 7-series in a staggered set - 20x9.0" ET24 in the front and 20x10.0" ET24 in the rear. Since these wheels are very common with the stance/lowered crowd you may have seen them on some unusual fitments. Since we don't know what modifications were done and what tire sizes were used to make them fit on stanced cars, we cannot guarantee fitment on all models. We have selected chassis where these wheels should fit with minimal issues. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail. 

BMW Style 95 wheel set includes -

• 2 x 20x9.0" ET24 BMW Style 95 Star Spoke Alloy Wheel (BMW #36116753241)
• 2 x 20x10.0" ET24 BMW Style 95 Star Spoke Alloy Wheel (BMW #36116753242)
• 4 x BMW wheel center caps (BMW #36136783536)

Revamp your tire aesthetics with the Tire Marker - White by Rennline. This high-quality tire marker allows you to add personalized touches to your tires, enhancing their appearance and visibility. Easy to use and durable, this tire marker is a must-have accessory for any car enthusiast.

• Personalize your tires with white marker
• Enhances tire appearance and visibility
• Easy to use
• Durable construction for long-lasting performance

This set of OEM TPMS sensors is the perfect complement to a new set of wheels or to refresh the sensors on your existing wheels. This set includes four OEM Huf sensors with grey valve stems and hardware. A new set of sensors is the best option for new wheels so you won't have to deal with the TPMS fault on your dash/iDrive or pull the sensors off your old wheels.

This is the early-style sensor for cars made before 2009/2010 (see full application list for exact fitments).

Upgrade the security of your BMW wheels with the BMW Conical Seat Locking Wheel Bolt Kit. This kit provides enhanced protection against wheel theft while adding a stylish touch to your vehicle. Engineered specifically for BMW models, these locking wheel bolts offer a precise fit and reliable performance. Ensure peace of mind and safeguard your investment with this premium locking wheel bolt kit.

• Enhanced protection against wheel theft
• Stylish addition to your BMW
• Engineered for precise fit and reliable performance
• Safeguards your investment

Upgrade your vehicle's wheel hardware with the Conical Seat Wheel Bolt - 12x1.5x39mm. This high-quality wheel bolt is designed to provide secure and reliable attachment of the wheels to the hub, ensuring safety and stability on the road. Engineered with precision, this wheel bolt offers a perfect fit and easy installation. Enhance your driving experience with this premium conical seat wheel bolt.

• Provides secure attachment of wheels to the hub
• Ensures safety and stability on the road
• Engineered with precision for perfect fit
• Easy installation for convenient upgrade

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RG-R style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Diamond Silver painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

• 18x8.5 ET38 - qty 4
• Diamond Silver
• Center Bore: 72.5
• Bolt Pattern: 5x120

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS wheels consist of a 2 piece die forged aluminum wheel and rim structure. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.

These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 20x8.5 ET15 - qty 2
• 20x10.5 ET22 - qty 2
• Diamond Silver
• Center Bore: PFS
• Bolt Pattern: 5x120