ST Suspensions Lowering Spring Set - BMW E46

For convertible models only For touring models only

T#:373581

Part#: 65281

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Optimizes chassis dynamics by limiting weight transfer and body roll.

BC Racing RM Series Coilover Suspension Kit - E46 Non-M RWD

For coupe and sedan models only

T#:4319898

Part#: I-02-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

Dust Sealing Gasket - Priced Each

T#:7828843

Part#: 31331110196

Back Ordered

$ 2.29 USD

Add to Wish List

Qty

$ 2.29 USD

Add to Wish List

Used to keep the elements off of strut shaft. Seals between strut mount and washer on spring perch.

Febi Ball Bearing For Strut Mounting

We Price Match - Give Us A Call or Chat!

T#:16375125

Part#: 31331090612SK

Special Order: No Guaranteed ETA

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

These replacements from Febi are the perfect solution for worn mounts/bearings. Because they are factory OE parts, they fit perfectly in the mounting location and are the proper length and have the correct inside diameter for your struts. A small addition to any front suspension overhaul that can make a huge difference in overall ride quality. Priced each, but should always be replaced in pairs. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer. One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks.

Show More Show Less

Rein Trailing Arm Bushing - E36, E46, E83, Z4

T#:379801

Part#: 33326771828

Back Ordered

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Bushing located in the rear lower position of the rear trailing arm

OEM Rein Front Bump Stop - E46 325/330

For sedan models with sport suspension and a production date from 09/2001 For vehicles with sport suspension and a production date from 04/2001 For coupe models with sport suspension and a production date from 09/2001 For coupe models with sport suspension and a production date from 04/2001

T#:12471

Part#: 31306757046

Ships in 1 Business Day

$ 9.17 USD

Add to Wish List

Qty

$ 9.17 USD

Add to Wish List

Bump stops provide a bottoming cushion on rough roads, limiting hydraulic damper travel to prevent suspension bottoming and damage. They also improve ride quality, softening harsh impacts. Replace them when installing new struts.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - E46 Non-M RWD

For coupe and sedan models only

T#:4333542

Part#: I-02-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

Lowering Spring Set

T#:376308

Part#: 65257

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

ST Sport Springs lower the center of gravity to reduce body roll in corners and limit weight transfer under acceleration. Manufactured to the highest worldwide quality standards, each spring is custom wound from high-tensile steel and rigorously tested and inspected to ensure absolute strength and reliability. Note: For vehicles with sport suspension, lowering height will be less than listed.

Show More Show Less

Yellow Adjustable Front Strut - Left

Does not fit Touring models

Call In Or Chat For Best Price!

T#:389416

Part#: D140-0461

Ships in 5 Business Days

11% off MSRP $ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.99 USD

Add to Wish List

Qty

11% off MSRP

$ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.99 USD

Add to Wish List

E46 325xi/330xi KW Coilover Kit - Variant 1 (V1)

T#:11562

Part#: 10220024

Special Order: No Guaranteed ETA

$ 1,924.00 USD

Add to Wish List

Qty

$ 1,924.00 USD

Add to Wish List

Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-65mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
This is the ideal coil over kit for an E46 Xi owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi 330xi

Show More Show Less

Rear Control Arm Bushing - Priced Each

T#:15478733

Part#: 33321092247

Back Ordered

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

If you're experiencing a less than stellar ride, a shaky steering wheel or suspension noise, your control arm bushings might need replaced.

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

T#:41289766

Part#: 31521428678TKT

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

BR Racing ZR Series Coilover Suspension Kit - E46 Non-M RWD

For coupe and sedan models only

T#:4333512

Part#: I-02-ZR

Ships in 6 Business Days

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333503

Part#: I-14-RM-O

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.

Show More Show Less

ST XA Performance Coilover System - Height And Rebound Adjustable - E...

T#:599124

Part#: 18220023

Back Ordered

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.

Show More Show Less

ST Suspensions Sporttech Lowering Kit - BMW E46

For coupe models only For sedan models only

T#:376309

Part#: 80151

Back Ordered

$ 989.00 USD

Add to Wish List

Qty

$ 989.00 USD

Add to Wish List

Eliminate guess work in suspension tuning with this kit.

KW Clubsport Coilover Kit - 2-Way Adjustable - E46 M3

T#:348849

Part#: 35220825

Back Ordered

$ 4,744.00 USD

Add to Wish List

Qty

$ 4,744.00 USD

Add to Wish List

Tailored for track performance, the KW Clubsport Coilover Kit offers exceptional adjustability, catering to enthusiasts who desire precise ride quality adjustments according to varying loads, tire setups, and other driving factors.

Product Benefits:

Ideal for track performance
Abundant adjustability options
Precision in ride quality adjustments
Customizable settings for load, tires, and driving conditions
Enhanced handling and responsiveness

Show More Show Less

E46 325xi/330xi KW Coilover Kit - Variant 3 (V3)

T#:11636

Part#: 35220024

Back Ordered

$ 3,094.00 USD

Add to Wish List

Qty

$ 3,094.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping

State-of-the-art technology from motor sports for more performance on the road for your E46 3 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

Individually adjustable rebound and compression

Infinitely variable rebound damping adjustment

14-way adjustable compression damping

Unique, individually working damping force adjustment

Stainless steel technology "inox-line"

Individually height-adjustable - Front - 35-65mm, Rear - 35-65mm

TUV approved lowering range

High-quality component parts for long durability.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi 330xi

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333520

Part#: I-14-ZR-O

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

3S Air Management System With P3 Controller

T#:22591957

Part#: 27718

Back Ordered

$ 1,045.00 USD

Add to Wish List

Qty

$ 1,045.00 USD

Add to Wish List

Introducing the Air Lift Performance 3S Air Management Kit

The Air Lift Performance 3S is a groundbreaking air management kit that takes performance to the next level. This kit includes a manifold and a basic wiring harness, providing the flexibility to be installed in conjunction with separately purchased components. It is compatible with both 1/4” and 3/8” air lines, offering various kit versions to cater to different displays and switch boxes or exclusive use with the ALP3 app. Whichever version you choose, seamless integration with the ALP3 app is guaranteed.

Components to be purchased separately include:

Air springs
Water trap
Controllers (e.g., AVS switchbox)
Fittings/air lines
Compressor
Insulated copper wires in 10-, 12-, 18-, and 20-gauge
Tank wire, connectors, terminals, butt splices
Pressure switch fuse/holders
Relay
Schrader valve and blow-off valve

Additionally, there are versions of the 3S kit available with the Air Lift Performance V2 or ALP3 controller or just the smartphone app for added convenience.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Off-Center Front Mounts...

T#:4333551

Part#: I-14-ER-O

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - On-Center Front Mounts ...

T#:4333550

Part#: I-14-ER-C

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - On-Center Front Mounts ...

T#:4333519

Part#: I-14-ZR-C

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

Rein Rear Control Arm Bushing - E36, E46, E83, Z4

T#:363435

Part#: 33321092247

Back Ordered

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Upper control arm to subframe bushing

BC Racing ZX Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51356016

Part#: I-121-ZX

Back Ordered

$ 2,595.00 USD

Add to Wish List

Qty

$ 2,595.00 USD

Add to Wish List

For the E46 M3 Convertible enthusiast looking to bridge the gap between a high-end street car and a dedicated race machine, the BC Racing ZX Series offers an unparalleled engineering approach. By moving the compression valving to the external canisters, the system maintains its integrity under high-stress, high-temperature conditions, effectively eliminating "damper fade." For the E46 M3 platform—especially the convertible which requires higher roll stiffness to compensate for chassis flex—the ZX Series' 12kg rear spring rate and advanced damping provide the stability needed to maintain a flat cornering attitude. The system features standard front pillowball camber plates to eliminate factory rubber "mush," providing direct and unmediated steering feedback to the driver. Key Features: Enhanced Thermal Management: External canisters keep fluid away from brake heat to maintain valving accuracy lap after lap. Camber Adjustable Top Mounts: High-quality aluminum alloy plates allow for aggressive track alignments to maximize the tire contact patch. Pillowball Rear Mounts: Replaces rubber bushings with solid spherical bearings (on applicable kits) for increased response and precision. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment in the car's competitive potential. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm (Swift Springs standard). Piston Design: Linear Twin-Piston with remote canister valving. Adjustment Range: 3-Way Independent (Rebound / Low-Speed Compression / High-Speed Compression). Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - E46 Convertible ...

T#:51320856

Part#: I-90-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

For the E46 Convertible owner looking to overcome the platform's inherent chassis flex and maximize track performance, the BC Racing HM Series offers a motorsport-first engineering approach. By utilizing an inverted strut layout and a high 12kg rear spring rate, the HM Series provides uncompromised geometry control under heavy cornering loads. The 2-way independent adjustment allows the driver to fine-tune high-speed stability and low-speed turn-in separately, which is critical for balancing a convertible's unique weight distribution. Every HM Series kit is hand-assembled with TIG-welded 304 stainless steel and 6061-T6 aluminum components, ensuring a system that is as durable as it is fast. Key Features: Enhanced Thermal Stability: External canisters move the fluid away from brake heat to maintain valving accuracy. Linear Twin-Piston Design: Provides a large surface area for precise and predictable damping response. Camber Adjustable Top Mounts: Precision-engineered aluminum plates eliminate factory rubber compliance for direct steering feedback. Independent Ride Height: Threaded shock bodies allow for height adjustment without sacrificing damper stroke or spring travel. Fully Rebuildable: All components are individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (Excludes M3). Spring Rates (Default): Front: 6 kg/mm | Rear: 12 kg/mm. Piston Design: Linear Twin-Piston. Construction: 304 Stainless Steel and Anodized 6061-T6 Aluminum. Warranty: 2-Year limited manufacturer's warranty.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - G30 AWD

T#:51355985

Part#: I-131-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

For the BMW G30 owner looking to eliminate the "wallow" of factory suspension, the BC Racing DS Series offers a professional-grade motorsport approach. Built from TIG-welded 304 stainless steel and heavy-duty aluminum, this system is designed to withstand the rigors of high-intensity driving. The DS Series includes high-strength SAE9254 cold-wound steel springs, which have been tested through over 500,000 cycles with less than 5% deformation. By moving the secondary damping piston to the digressive valving architecture, the system provides a sharper turn-in and more direct steering feedback. Every DS Series kit is hand-assembled and fully rebuildable, ensuring it remains a long-term performance investment for your BMW. Key Features: Enhanced Chassis Poise: Digressive damping curve specifically combats the weight of the G30 chassis during spirited driving. Pillowball Top Mounts: High-quality aluminum alloy mounts provide direct feedback and eliminate factory rubber compliance. Patented Locking Ring: Features a concave lower locking ring that prevents the system from vibrating loose even under track conditions. Bearing-Mounted Spring Platforms: Minimizes "spring binding" or popping during low-speed steering maneuvers. Customization Ready: Fully compatible with custom spring rates and Swift Spring upgrades for tailored track setups. Specifications: Vehicle Fitment: 2017–2023 BMW 5-Series (G30) Sedan AWD / xDrive. Spring Rates (Default): Front: 9 kg/mm | Rear: 4.2 kg/mm. Adjustability: Independent ride height, independent spring preload, and 30-way damping. Maintenance: Fully rebuildable with all replacement parts readily available. Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - E46 Convertible ...

T#:51320857

Part#: I-90-ZR

Back Ordered

$ 2,865.00 USD

Add to Wish List

Qty

$ 2,865.00 USD

Add to Wish List

Designed for racers ranging from novice to pro, the BC Racing ZR Series addresses the unique weight distribution and chassis requirements of the E46 Convertible. The inverted front struts utilize a massive 42mm piston shaft, providing a rigid backbone that prevents geometry deflection under heavy braking and high-G cornering. By separating low-speed and high-speed compression, drivers can stiffen low-speed damping to eliminate body roll and pitch during turn-in while keeping high-speed damping compliant enough to absorb track curbing without upsetting the chassis. Every ZR kit is hand-assembled with TIG-welded steel and anodized 6061-T6 aluminum, providing a professional-grade motorsport component that is fully rebuildable and customizable. Key Features: Enhanced Low-Speed Damping: Specifically tuned to stabilize the E46’s heavier convertible chassis during quick weight transitions. Thermal Management: Remote-mounted external reservoirs move fluid away from hot brake components to ensure consistent lap times. Camber Adjustable Top Mounts: High-quality aluminum plates eliminate factory rubber "mush," providing direct, unmediated steering feedback. Bearing-Mounted Spring Platforms: Minimizes friction between the spring and perch to eliminate "spring binding" during tight steering. Industrial Corrosion Protection: Black chrome-plated steel shock bodies and electrophoretic disposition on steel mounts ensure a long service life. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (All models except M3). Spring Rates (Standard): Front: 6 kg/mm | Rear: 10 kg/mm (Swift Springs). Piston Design: Linear Twin-Piston (Standard on 3-way kits). Weight: Approx. 23 kg (Full Kit). Warranty: 2-Year limited manufacturer's warranty.

Show More Show Less

Front And Rear Performance Suspension Upgrade Kit - E46 Non M - Coupe...

For Coupes only

T#:3136216

Part#: E46NONMPSOTKT

Ships in 1-2 days

Sale - Save 2% $ 2,380.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,340.62 USD

Add to Wish List

Qty

Sale - Save 2%

$ 2,380.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,340.62 USD

Add to Wish List

Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51355987

Part#: I-121-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The BC Racing DS Series for the E46 M3 Convertible is built using motorsport-grade materials designed to withstand the rigors of spirited driving and technical road courses. Because the E46 M3 platform benefits greatly from increased front camber, this kit comes standard with front pillowball camber plates. These plates replace the compliant factory rubber mounts, providing unmediated feedback to the driver and allowing for aggressive alignment settings to maximize tire contact patches. Every DS Series kit is hand-assembled and fully rebuildable, with the option to upgrade to Swift Springs for even more consistent spring rates and reduced weight. Whether you're carving canyons or attending a weekend track day, the DS Series provides the stability and feedback needed to push the E46 M3 chassis to its limits. Key Features: Front Camber Plates: Precision-engineered aluminum alloy plates for surgical alignment and increased turn-in bite. Patented Locking Ring: Features a concave lower locking ring that prevents the system from vibrating loose even under track conditions. Bearing-Mounted Spring Platforms: Minimizes "spring binding" or popping during low-speed steering maneuvers. Fully Rebuildable: Every component, from the seals to the valving, is individual and replaceable for long-term serviceability. Customization Ready: Fully compatible with custom spring rates and Swift Spring upgrades for tailored track setups. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Default): Front: 7 kg/mm | Rear: 12 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel. Adjustability: Independent ride height, independent spring preload, and 30-way damping. Warranty: 2-Year limited manufacturer's warranty.

Show More Show Less

RM Series Coilover Suspension Kit - E46 Convertible

T#:51320850

Part#: I-90-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

For the E46 Convertible enthusiast who demands uncompromised feedback, the BC Racing RM Series offers a professional-grade solution. By moving the oil reservoir away from the wheel hub and brake components, the RM Series manages heat more effectively, preventing "damper fade" during long track sessions. The inclusion of front pillowball camber plates eliminates the compliant factory rubber bushings, providing direct and unmediated steering feel. Because convertibles often suffer from chassis flex, the RM Series' ability to maintain a flat cornering attitude through its stiff 12kg rear spring rate and robust inverted front struts makes it a transformative upgrade for the E46 platform. Key Features: Enhanced Thermal Management: Inverted layout moves fluid away from brake heat to maintain consistent damping performance. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for aggressive alignment specs to maximize front-end grip. Patented Concave Locking Ring: Unique design ensures that once ride height is set, the lower mounts remain locked securely. TIG-Welded Durability: High-strength steel shock bodies with a black chrome finish for maximum corrosion resistance. Fully Rebuildable: Every component is individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (Excludes M3). Spring Rates (Default): Front: 6 kg/mm | Rear: 12 kg/mm. Damping Curve: Linear. Construction: Heavy-duty steel and 6061-T6 aluminum. Warranty: 2-Year limited warranty against manufacturer's defects.

Show More Show Less

ZX Series Coilover Suspension Kit - E46 Convertible

T#:51320859

Part#: I-90-ZX

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

For the E46 Convertible enthusiast looking to bridge the gap between a high-end street car and a dedicated race machine, the BC Racing ZX Series offers an unparalleled engineering approach. By moving the compression valving to the external canisters, the system maintains its integrity under high-stress, high-temperature conditions, effectively eliminating "damper fade." For the E46 Convertible—which lacks the structural rigidity of its coupe counterparts—the ZX Series' advanced damping provides the stability needed to maintain a flat cornering attitude. The system features bearing-mounted spring platforms to eliminate "spring binding" or popping during tight maneuvers. Fully rebuildable and customizable, the ZX Series is a long-term investment in the competitive potential of your BMW. Key Features: Enhanced Thermal Management: External canisters keep fluid away from brake heat, maintaining valving accuracy lap after lap. Camber Adjustable Top Mounts: High-quality aluminum plates eliminate factory rubber "mush," providing direct, unmediated steering feedback. Independent Ride Height: Threaded bottom mounts allow for ride height changes without sacrificing suspension travel or preload. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Custom Valving Available: Each kit can be custom-valved to match specific driver preferences or extreme aero/tire setups. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (Excludes M3 models). Spring Rates (Default): Front: 6 kg/mm | Rear: 10 kg/mm (Swift Springs standard). Spring Type: Genuine Swift Springs for reduced unsprung weight. Piston Design: Linear Twin-Piston with remote canister valving. Warranty: 2-Year limited manufacturer's warranty.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51355992

Part#: I-121-ER

Back Ordered

$ 1,955.00 USD

Add to Wish List

Qty

$ 1,955.00 USD

Add to Wish List

For the E46 M3 enthusiast looking to bridge the gap between a high-end street car and a dedicated race machine, the BC Racing ER Series offers a "motorsport-first" engineering approach. By moving the secondary damping piston to the external canister, the system maintains its integrity under high-stress conditions. This is especially beneficial for the M3 Convertible, where the high 12kg rear spring rate helps counteract the platform's inherent weight and chassis flex, providing a flat and predictable cornering attitude. The system includes front pillowball camber plates as standard, eliminating the compliant factory rubber bushings to provide direct, unmediated steering feedback and allowing for aggressive track-ready alignment settings. Key Features: Reduced Damping Fade: External canisters keep fluid cooler by increasing the distance from hot brake components. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for surgical alignment and increased turn-in bite. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme vibration. Linear Piston Architecture: Provides a predictable and consistent damping feel for better driver confidence at the limit. Serviceable Construction: All components are individual and fully replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel. Construction: Black chrome-plated steel bodies for maximum corrosion resistance and anodized 6061-T6 aluminum. Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

Race Polyurethane Front Sway Bar Bushing Set - E46 M3

T#:376580

Part#: PFF5-4602-30.8B2

Ships in 2 Business Days

$ 95.99

This product was last offered at the strikethrough price on
05-27-2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

Show More Show Less

ER Series Coilover Suspension Kit - E46 Convertible

T#:51320855

Part#: I-90-ER

Back Ordered

$ 1,955.00 USD

Add to Wish List

Qty

$ 1,955.00 USD

Add to Wish List

For the E46 Convertible enthusiast looking to bridge the gap between a high-end street car and a dedicated race machine, the BC Racing ER Series offers uncompromised performance. By moving the secondary damping piston to the external canister, the system maintains its integrity under high-stress, high-temperature conditions. This is especially beneficial for the E46 Convertible, where the added 12kg rear spring rate helps counteract the platform's inherent weight distribution and chassis flex. The system features bearing-mounted spring platforms to eliminate the friction and "spring binding" often felt during tight steering maneuvers. Every ER Series kit is hand-assembled with precision and is fully rebuildable, ensuring it remains a long-term investment in the performance of your BMW. Key Features: Reduced Damping Fade: Strategic fluid placement keeps oil cooler, preserving valving accuracy during extended spirited driving. Camber Adjustable Top Mounts: High-quality aluminum plates eliminate the "mushy" feel of factory rubber bushings for direct driver feedback. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme vibration. Customization Ready: Fully compatible with Swift Spring upgrades and custom valving tailored to specific tire or aero setups. Serviceable Construction: All components are individual and fully replaceable directly through BC Racing North America. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (Excludes M3). Spring Rates (Default): Front: 6 kg/mm | Rear: 12 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel. Construction: 304 Stainless Steel and 6061-T6 Anodized Aluminum. Warranty: 2-Year limited manufacturer's warranty.

Show More Show Less

Front And Rear Performance Suspension Upgrade Kit - E46 Non M Convert...

For Convertibles Only

T#:3136217

Part#: E46NONMPSOCOTKT

Ships in 1-2 days

Sale - Save 2% $ 2,417.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,375.76 USD

Add to Wish List

Qty

Sale - Save 2%

$ 2,417.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,375.76 USD

Add to Wish List

Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.

Show More Show Less

E46 HM Series Coilover Suspension Kit

T#:4319923

Part#: I-02-HM

Back Ordered

$ 2,535.00 USD

Add to Wish List

Qty

$ 2,535.00 USD

Add to Wish List

BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty NOTE: LEAD TIMES FOR ALL NEW ORDERS ARE 4-8 WEEKS.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51355994

Part#: I-121-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

For the E46 M3 Convertible owner who demands uncompromised geometry control, the BC Racing HM Series offers a motorsport-first engineering solution. By utilizing an inverted strut layout with a much larger internal piston shaft, the HM Series excels in maintaining wheel alignment during extreme lateral cornering—a critical factor for the MacPherson strut-equipped M3. The addition of external reservoirs ensures the damping fluid remains cool, preserving valving accuracy lap after lap. Standard front pillowball camber plates eliminate factory rubber "mush," providing direct and unmediated steering feedback. Because convertibles often require higher roll stiffness to compensate for chassis flex, the HM Series’ 12kg rear spring rate provides the stability needed to keep the car planted and responsive. Key Features: Enhanced Side-Load Resistance: The inverted design handles high lateral loads longer than traditional upright dampers without fatigue. Reduced Damper Fade: External canisters move fluid away from brake heat to maintain consistent lap times. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for surgical alignment and increased turn-in bite. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked even under track conditions. Fully Rebuildable: All components are individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Standard): Front: 8 kg/mm | Rear: 12 kg/mm (Swift Springs). Hardware: Black chrome-plated steel shock bodies and 6061-T6 aluminum components. Adjustment Type: Independent ride height, spring preload, and 2-way damping. Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51355989

Part#: I-121-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

For the E46 M3 Convertible owner who demands uncompromised feedback during spirited driving or track sessions, the BC Racing RM Series offers a professional-grade motorsport approach. By moving the fluid reservoir away from the wheel hub and brake components, the RM Series manages heat more effectively, preventing damper fade during prolonged high-speed sessions. The inclusion of front pillowball camber plates replaces compliant factory rubber bushings, providing direct and unmediated steering feel. Because convertibles often require higher roll stiffness to compensate for chassis flex, the RM Series' default 12kg rear spring rate provides the stability needed to keep the E46 M3 planted and responsive through tight technical sections. Key Features: Reduced Damper Fade: Inverted layout keeps oil temperature more stable by increasing distance from hot brake components. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for aggressive alignment specs to maximize front-end grip. Patented Concave Locking Ring: Unique design ensures that once ride height is set, the lower mounts remain locked securely against vibration. Linear Piston Architecture: Provides a predictable and consistent damping feel for better driver confidence at the limit. Fully Rebuildable: Every component is individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Optional Upgrades: Compatible with custom spring rates and Swift Springs (+2kg/-2kg range on standard valving). Finish: Black chrome-plated steel bodies for maximum corrosion resistance. Warranty: 2-Year limited warranty against manufacturer's defects.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - E46 Convertible ...

T#:51320846

Part#: I-90-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The BC Racing DS Series for the E46 Convertible is built using motorsport-grade materials designed to withstand the rigors of spirited driving and technical road courses. Because the E46 platform benefits greatly from increased front camber, this kit comes standard with front pillowball camber plates. These plates replace the compliant factory rubber mounts, providing unmediated feedback to the driver and allowing for aggressive alignment settings to maximize tire contact patches. Every DS Series kit is fully rebuildable and customizable, with the option to upgrade to Swift Springs for even more consistent spring rates and reduced weight. Whether you're carving canyons or attending a weekend track day, the DS Series provides the stability and feedback needed to push the E46 chassis to its limits. Key Features: Front Camber Plates: Precision-engineered aluminum plates for surgical alignment and increased turn-in bite. Satin Chrome Finished Shock Body: A highly durable coating that resists the elements while providing a high-end look. Linear Spring Piston: While the valving is digressive, the springs remain linear to provide a predictable and consistent feel. Fully Rebuildable: Every part, from the seals to the valving, is serviceable and replaceable. Custom Spring Rate Compatibility: Can be ordered with custom valving paired specifically to your requested spring rates. Specifications: Vehicle Fitment: 2000–2006 BMW 3-Series (E46) Convertible (All models except M3). Spring Rates (Default): Front: 6 kg/mm | Rear: 8 kg/mm. Optional Rates: Custom rates available (e.g., 8kg/10kg) for more track-oriented setups. Piston Diameter: 46mm. Adjustability: Ride height, spring preload, and 30-way damping.

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - E46 M3 Convertible ...

T#:51356002

Part#: I-121-ZR

Back Ordered

$ 2,865.00 USD

Add to Wish List

Qty

$ 2,865.00 USD

Add to Wish List

For the professional-level racer or the extreme enthusiast, the BC Racing ZR Series addresses the unique geometric and thermal requirements of the E46 M3 platform. By utilizing inverted front struts with a massive 42mm piston shaft, the ZR Series provides extreme structural rigidity, preventing geometry deflection under heavy braking and cornering loads. The 3-way adjustment allows the driver to "dial in" the car for specific obstacles; for instance, softening high-speed compression to soak up aggressive curbing while keeping low-speed compression firm for immediate turn-in response. Combined with standard pillowball top mounts, this system eliminates the "mushy" feel of factory rubber, providing direct, unmediated feedback to the driver. Key Features: Reduced Damper Fade: Remote external canisters move fluid away from hot brake components to ensure consistent lap times. Camber Adjustable Top Mounts: High-quality aluminum plates allow for aggressive track alignments to maximize the tire contact patch. Pillowball Rear Mounts: Replaces rubber bushings with solid spherical bearings for increased response and precision. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment in the car's competitive potential Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Construction: TIG-welded steel and CNC-machined aluminum. Adjustment Range: 3-Way Independent (Rebound / Low-Speed Compression / High-Speed Compression). Warranty: 1-Year manufacturer’s warranty against defects.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

Sub-Categories

Product Benefits:

Introducing the Air Lift Performance 3S Air Management Kit

Components to be purchased separately include:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results